diff options
Diffstat (limited to 'en/compatibility/cts/sensor-fusion-box-assembly.md')
-rw-r--r-- | en/compatibility/cts/sensor-fusion-box-assembly.md | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/en/compatibility/cts/sensor-fusion-box-assembly.md b/en/compatibility/cts/sensor-fusion-box-assembly.md index ba236e51..5f6c6f6f 100644 --- a/en/compatibility/cts/sensor-fusion-box-assembly.md +++ b/en/compatibility/cts/sensor-fusion-box-assembly.md @@ -51,7 +51,7 @@ Figure 1): Before starting, ensure you have downloaded the technical drawings for the Sensor Fusion Box (included in the -[Sensor Fusion Box zip file](/compatibility/cts/sensor_fusion_1.5.zip)) and +[Sensor Fusion Box zip file](/compatibility/cts/sensor_fusion_1_5.zip)) and have the following tools available: * Phillips head screwdriver @@ -211,7 +211,7 @@ To complete assembly of the Sensor Fusion Box: screw detail 1. Print out a colored copy of the checkerboard (included in the [Sensor Fusion - Box zip file](/compatibility/cts/sensor_fusion_1.5.zip)) on A3 (or 11 x 17 + Box zip file](/compatibility/cts/sensor_fusion_1_5.zip)) on A3 (or 11 x 17 inch) paper, and tape it on the opposite wall of the phone fixture. Make sure the red dot in the center of the checkerboard is directly facing |