diff options
Diffstat (limited to 'en/compatibility/cts/camera-wfov-box-assembly.md')
| -rw-r--r-- | en/compatibility/cts/camera-wfov-box-assembly.md | 45 |
1 files changed, 41 insertions, 4 deletions
diff --git a/en/compatibility/cts/camera-wfov-box-assembly.md b/en/compatibility/cts/camera-wfov-box-assembly.md index 3e7ab382..cadc0b42 100644 --- a/en/compatibility/cts/camera-wfov-box-assembly.md +++ b/en/compatibility/cts/camera-wfov-box-assembly.md @@ -65,10 +65,10 @@ internal lighting system, and a plastic box that is laser cut from CAD drawings ### Required tools -Before getting started, ensure you have downloaded the -[technical drawings for the WFoV ITS-in-a-box](/compatibility/cts/wfov_its_box_assembly_2.6.zip), -cut the plastic and vinyl pieces, purchased the hardware -from the BOM, and have the following tools available: +To get started, download the latest +[technical drawings for the WFoV ITS-in-a-box](/compatibility/cts/wfov_its_box_assembly_2_7.zip), +cut the plastic and vinyl pieces, purchase the hardware from the bill of +materials (BOM), and gather these tools: + Phillips head screwdriver + Pliers @@ -77,6 +77,8 @@ from the BOM, and have the following tools available: + Water spray bottle + X-acto knife +Note: For more information on past versions, see [Revision history](#revision_history). + ### Step 1: Apply colored vinyl To apply colored vinyl: @@ -246,3 +248,38 @@ To assemble the WFoV ITS box: {: width="500"} **Figure 22.** Assembled WFoV box: rear view (left) and front view (right) + +### Revision history + +The following describes the changes made to the WFoV ITS-in-a-box. + +#### Revision 2.7 + +- Switched light in the BOM (#16) to UL listed LED tape for better manufacturing + consistency. +- Switched power supply in the BOM (#17) to the same source as #16. +- Revised the tablet mount to be 35mm wider to match the tablet opening (page 4 + on mechanical drawing) +- Revised the front clamp hole spacing (distance) to align with the clamp slot + length (page 5 on mechanical drawing) +- Reduced the front aperture circle diameter by 20mm to match the [RFoV + ITS-in-a-box (revision 1)](/compatibility/cts/camera-its-box-assembly) (page + 5 on mechanical drawing) + +#### Revision 2.6 (released internally) + +- Made a correction to the mechanical drawing + +#### Revision 2.5 + +- Simplified tablet holder to be similar to the phone mount +- Used a sandblast finish instead of an anodized finish to reduce costs +- Corrected specifications for LED lights on the BOM + +#### Revision 2.4 + +- Switched from acrylic to ABS material to reduce shipping damage +- Removed 3D printing elements and replaced them with laser-cut ABS to reduce + costs +- Changed the box handles to use ABS instead of being a separate item to + purchase on the BOM |