diff options
Diffstat (limited to 'pkg/legacy/rpm.bzl')
| -rw-r--r-- | pkg/legacy/rpm.bzl | 246 |
1 files changed, 0 insertions, 246 deletions
diff --git a/pkg/legacy/rpm.bzl b/pkg/legacy/rpm.bzl deleted file mode 100644 index 3211bbd..0000000 --- a/pkg/legacy/rpm.bzl +++ /dev/null @@ -1,246 +0,0 @@ -# Copyright 2017 The Bazel Authors. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -"""Rules to create RPM archives. - -NOTE: this module is deprecated in favor of pkg/rpm_pfg.bzl. For more -information on the `pkg_filegroup` framework it uses, see pkg/mappings.bzl. - -pkg_rpm() depends on the existence of an rpmbuild toolchain. Many users will -find to convenient to use the one provided with their system. To enable that -toolchain add the following stanza to WORKSPACE: - - # Find rpmbuild if it exists. - load("@rules_pkg//toolchains/rpm:rpmbuild_configure.bzl", "find_system_rpmbuild") - find_system_rpmbuild(name="rules_pkg_rpmbuild") -""" - -rpm_filetype = [".rpm"] - -spec_filetype = [".spec"] - -def _pkg_rpm_impl(ctx): - """Implements to pkg_rpm rule.""" - - files = [] - tools = [] - args = ["--name=" + ctx.label.name] - if ctx.attr.debug: - args += ["--debug"] - - if ctx.attr.rpmbuild_path: - args += ["--rpmbuild=" + ctx.attr.rpmbuild_path] - - # buildifier: disable=print - print("rpmbuild_path is deprecated. See the README for instructions on how" + - " to migrate to toolchains") - else: - toolchain = ctx.toolchains["@rules_pkg//toolchains/rpm:rpmbuild_toolchain_type"].rpmbuild - if not toolchain.valid: - fail("The rpmbuild_toolchain is not properly configured: " + - toolchain.name) - if toolchain.path: - args += ["--rpmbuild=" + toolchain.path] - else: - executable_files = toolchain.label[DefaultInfo].files_to_run - tools.append(executable_files) - args.append("--rpmbuild=%s" % executable_files.executable.path) - - # Version can be specified by a file or inlined. - if ctx.attr.version_file: - if ctx.attr.version: - fail("Both version and version_file attributes were specified") - args += ["--version=@" + ctx.file.version_file.path] - files += [ctx.file.version_file] - elif ctx.attr.version: - args += ["--version=" + ctx.attr.version] - - # Release can be specified by a file or inlined. - if ctx.attr.release_file: - if ctx.attr.release: - fail("Both release and release_file attributes were specified") - args += ["--release=@" + ctx.file.release_file.path] - files += [ctx.file.release_file] - elif ctx.attr.release: - args += ["--release=" + ctx.attr.release] - - # SOURCE_DATE_EPOCH can be specified by a file or inlined. - if ctx.attr.source_date_epoch_file: - if ctx.attr.source_date_epoch: - fail("Both source_date_epoch and source_date_epoch_file attributes were specified") - args += ["--source_date_epoch=@" + ctx.file.source_date_epoch_file.path] - files += [ctx.file.source_date_epoch_file] - elif ctx.attr.source_date_epoch != None: - args += ["--source_date_epoch=" + str(ctx.attr.source_date_epoch)] - - if ctx.attr.architecture: - args += ["--arch=" + ctx.attr.architecture] - - if not ctx.attr.spec_file: - fail("spec_file was not specified") - - # Expand the spec file template. - spec_file = ctx.actions.declare_file("%s.spec" % ctx.label.name) - - # Create the default substitutions based on the data files. - substitutions = {} - for data_file in ctx.files.data: - key = "{%s}" % data_file.basename - substitutions[key] = data_file.path - ctx.actions.expand_template( - template = ctx.file.spec_file, - output = spec_file, - substitutions = substitutions, - ) - args += ["--spec_file=" + spec_file.path] - files += [spec_file] - - args += ["--out_file=" + ctx.outputs.rpm.path] - - # Add data files. - if ctx.file.changelog: - files += [ctx.file.changelog] - args += [ctx.file.changelog.path] - files += ctx.files.data - - for f in ctx.files.data: - args += [f.path] - - # Call the generator script. - ctx.actions.run( - mnemonic = "MakeRpm", - executable = ctx.executable._make_rpm, - use_default_shell_env = True, - arguments = args, - inputs = files, - outputs = [ctx.outputs.rpm], - env = { - "LANG": "en_US.UTF-8", - "LC_CTYPE": "UTF-8", - "PYTHONIOENCODING": "UTF-8", - "PYTHONUTF8": "1", - }, - tools = tools, - ) - - # Link the RPM to the expected output name. - ctx.actions.symlink( - output = ctx.outputs.out, - target_file = ctx.outputs.rpm, - ) - - # Link the RPM to the RPM-recommended output name if possible. - if "rpm_nvra" in dir(ctx.outputs): - ctx.actions.symlink( - output = ctx.outputs.rpm_nvra, - target_file = ctx.outputs.rpm, - ) - -def _pkg_rpm_outputs(version, release): - outputs = { - "out": "%{name}.rpm", - "rpm": "%{name}-%{architecture}.rpm", - } - - # The "rpm_nvra" output follows the recommended package naming convention of - # Name-Version-Release.Arch.rpm - # See http://ftp.rpm.org/max-rpm/ch-rpm-file-format.html - if version and release: - outputs["rpm_nvra"] = "%{name}-%{version}-%{release}.%{architecture}.rpm" - - return outputs - -# Define the rule. -pkg_rpm = rule( - doc = "Legacy version", - attrs = { - "spec_file": attr.label( - mandatory = True, - allow_single_file = spec_filetype, - ), - "architecture": attr.string(default = "all"), - "version_file": attr.label( - allow_single_file = True, - ), - "version": attr.string(), - "changelog": attr.label( - allow_single_file = True, - ), - "data": attr.label_list( - mandatory = True, - allow_files = True, - ), - "release_file": attr.label(allow_single_file = True), - "release": attr.string(), - "source_date_epoch_file": attr.label(allow_single_file = True), - "source_date_epoch": attr.int(), - "debug": attr.bool(default = False), - - # Implicit dependencies. - "rpmbuild_path": attr.string(), # deprecated - "_make_rpm": attr.label( - default = Label("//pkg:make_rpm"), - cfg = "exec", - executable = True, - allow_files = True, - ), - }, - executable = False, - outputs = _pkg_rpm_outputs, - implementation = _pkg_rpm_impl, - toolchains = ["@rules_pkg//toolchains/rpm:rpmbuild_toolchain_type"], -) - -# buildifier: disable=no-effect -"""Creates an RPM format package from the data files. - -This runs rpmbuild (and requires it to be installed beforehand) to generate -an RPM package based on the spec_file and data attributes. - -Two outputs are guaranteed to be produced: "%{name}.rpm", and -"%{name}-%{architecture}.rpm". If the "version" and "release" arguments are -non-empty, a third output will be produced, following the RPM-recommended -N-V-R.A format (Name-Version-Release.Architecture.rpm). Note that due to -the fact that rule implementations cannot access the contents of files, -the "version_file" and "release_file" arguments will not create an output -using N-V-R.A format. - -Args: - spec_file: The RPM spec file to use. If the version or version_file - attributes are provided, the Version in the spec will be overwritten, - and likewise behaviour with release and release_file. Any Sources listed - in the spec file must be provided as data dependencies. - The base names of data dependencies can be replaced with the actual location - using "{basename}" syntax. - version: The version of the package to generate. This will overwrite any - Version provided in the spec file. Only specify one of version and - version_file. - version_file: A file containing the version of the package to generate. This - will overwrite any Version provided in the spec file. Only specify one of - version and version_file. - release: The release of the package to generate. This will overwrite any - release provided in the spec file. Only specify one of release and - release_file. - release_file: A file containing the release of the package to generate. This - will overwrite any release provided in the spec file. Only specify one of - release and release_file. - changelog: A changelog file to include. This will not be written to the spec - file, which should only list changes to the packaging, not the software itself. - source_date_epoch: Value to export as SOURCE_DATE_EPOCH to facilitate reproducible - timestamps. Implicitly sets the `%clamp_mtime_to_source_date_epoch` in the - subordinate call to `rpmbuild` to facilitate more consistent in-RPM file - timestamps. - source_date_epoch_file: File containing the SOURCE_DATE_EPOCH value. Sets - `%clamp_mtime_to_source_date_epoch` like with "source_date_epoch". - data: List all files to be included in the package here. -""" |