1 files changed, 0 insertions, 243 deletions
diff --git a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/hid/device/kbd/example/atxmega128b1_xmega_b1_xplained/ui.c b/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/hid/device/kbd/example/atxmega128b1_xmega_b1_xplained/ui.c
deleted file mode 100644
index c85797d..0000000
--- a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/hid/device/kbd/example/atxmega128b1_xmega_b1_xplained/ui.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/**
- * \file
- *
- * \brief User Interface
- *
- * Copyright (C) 2009 Atmel Corporation. All rights reserved.
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- */
-
-#include "compiler.h"
-#include "conf_usb.h"
-#include "udc.h"
-#include "udi_hid_kbd.h"
-#include "board.h"
-#include "led.h"
-#include "ui.h"
-
-static struct{
-bool b_modifier;
-bool b_down;
-uint8_t u8_value;
-} ui_sequence[] = {
-	// Display windows menu
-	{true,true,HID_MODIFIER_LEFT_UI},
-	// Launch Windows Command line
-	{false,true,HID_R},
-	{false,false,HID_R},
-	// Clear modifier
-	{true,false,HID_MODIFIER_LEFT_UI},
-	// Tape sequence "notepad" + return
-	{false,true,HID_N},
-	{false,false,HID_N},
-	{false,true,HID_O},
-	{false,false,HID_O},
-	{false,true,HID_T},
-	{false,false,HID_T},
-	{false,true,HID_E},
-	{false,false,HID_E},
-	{false,true,HID_P},
-	{false,false,HID_P},
-	{false,true,HID_A},
-	{false,false,HID_A},
-	{false,true,HID_D},
-	{false,false,HID_D},
-	{false,true,HID_ENTER},
-	{false,false,HID_ENTER},
-	// Display "Atmel "
-	{true,true,HID_MODIFIER_RIGHT_SHIFT},	// Enable Maj
-	{false,true,HID_A},
-	{false,false,HID_A},
-	{true,false,HID_MODIFIER_RIGHT_SHIFT},	// Disable Maj
-	{false,true,HID_T},
-	{false,false,HID_T},
-	{false,true,HID_M},
-	{false,false,HID_M},
-	{false,true,HID_E},
-	{false,false,HID_E},
-	{false,true,HID_L},
-	{false,false,HID_L},
-	{false,true,HID_SPACEBAR},
-	{false,false,HID_SPACEBAR},
-	// Display "AVR "
-	{false,true,HID_CAPS_LOCK},			// Enable caps lock
-	{false,false,HID_CAPS_LOCK},
-	{false,true,HID_A},
-	{false,false,HID_A},
-	{false,true,HID_V},
-	{false,false,HID_V},
-	{false,true,HID_R},
-	{false,false,HID_R},
-	{false,true,HID_CAPS_LOCK},			// Disable caps lock
-	{false,false,HID_CAPS_LOCK},
-};
-
-void ui_init(void)
-{
-	LED_On(LED0_GPIO);
-	LED_Off(LED1_GPIO);
-}
-
-void ui_powerdown(void)
-{
-	LED_Off(LED0_GPIO);
-	LED_Off(LED1_GPIO);
-}
-
-void ui_wakeup_enable(void)
-{
-	PORT_t *port;
-	// Configure pin change interrupt for asynch. wake-up on button pin.
-	ioport_configure_pin(GPIO_PUSH_BUTTON_0,
-			IOPORT_DIR_INPUT | IOPORT_PULL_UP);
-	ioport_configure_pin(GPIO_PUSH_BUTTON_1,
-			IOPORT_DIR_INPUT | IOPORT_PULL_UP);
-	ioport_configure_pin(GPIO_PUSH_BUTTON_2,
-			IOPORT_DIR_INPUT | IOPORT_PULL_UP);
-	ioport_configure_pin(GPIO_PUSH_BUTTON_3,
-			IOPORT_DIR_INPUT | IOPORT_PULL_UP);
-	port = ioport_pin_to_port(GPIO_PUSH_BUTTON_0);
-	port->INT0MASK = 0xFF;
-	port->INTCTRL = PORT_INT0LVL_LO_gc;
-}
-
-void ui_wakeup_disable(void)
-{
-	PORT_t *port;
-	port = ioport_pin_to_port(GPIO_PUSH_BUTTON_0);
-	port->INT0MASK = 0x00;
-}
-
-// Interrupt on "pin change" from switch to do wakeup on USB
-// Note:
-// This interrupt is enable when the USB host enable remotewakeup feature
-// This interrupt wakeup the CPU if this one is in idle mode
-ISR(PORTB_INT0_vect)
-{
-	PORT_t *port;
-	port = ioport_pin_to_port(GPIO_PUSH_BUTTON_0);
-	port->INTFLAGS = 0x01;	// Ack interrupt
-	// It is a wakeup then send wakeup USB
-	udc_wakeup();
-}
-
-void ui_wakeup(void)
-{
-	LED_On(LED0_GPIO);
-}
-
-void ui_process(uint16_t framenumber)
-{
-	bool b_btn_state, sucess;
-	static bool btn_last_state = false;
-	static bool sequence_running = false;
-	static uint8_t u8_sequence_pos = 0;
-	uint8_t u8_value;
-	static uint16_t cpt_sof = 0;
-
-	if ((framenumber % 1000) == 0) {
-		LED_On(LED1_GPIO);
-	}
-	if ((framenumber % 1000) == 500) {
-		LED_Off(LED1_GPIO);
-	}
-	// Scan process running each 2ms
-	cpt_sof++;
-	if ((cpt_sof%2)==0)
-		return;
-
-	// Scan buttons on switch 0 to send keys sequence
-	b_btn_state = (gpio_pin_is_low(GPIO_PUSH_BUTTON_0)) ? true : false;
-	if (b_btn_state != btn_last_state) {
-		btn_last_state = b_btn_state;
-		sequence_running = true;
-	}
-
-	// Sequence process running each 200ms
-	if (200 > cpt_sof)
-		return;
-	cpt_sof = 0;
-
-	if (sequence_running) {
-		// Send next key
-		u8_value = ui_sequence[u8_sequence_pos].u8_value;
-		if (ui_sequence[u8_sequence_pos].b_modifier) {
-			if (ui_sequence[u8_sequence_pos].b_down) {
-				sucess = udi_hid_kbd_modifier_down(u8_value);
-			}else{
-				sucess = udi_hid_kbd_modifier_up(u8_value);
-			}
-		}else{
-			if (ui_sequence[u8_sequence_pos].b_down) {
-				sucess = udi_hid_kbd_down(u8_value);
-			}else{
-				sucess = udi_hid_kbd_up(u8_value);
-			}
-		}
-		if (!sucess)
-			return;	// Retry it on next schedule
-
-		// Valid sequence position
-		u8_sequence_pos++;
-		if (u8_sequence_pos>=sizeof(ui_sequence)/sizeof(ui_sequence[0])) {
-			u8_sequence_pos=0;
-			sequence_running=false;
-		}
-	}
-}
-
-void ui_kbd_led(uint8_t value)
-{
-	if (value&HID_LED_NUM_LOCK) {
-		LED_On(LED2_GPIO);
-	}else{
-		LED_Off(LED2_GPIO);
-	}
-	if (value&HID_LED_CAPS_LOCK) {
-		LED_On(LED3_GPIO);
-	}else{
-		LED_Off(LED3_GPIO);
-	}
-}
-
-/**
- * \defgroup UI User Interface
- *
- * Human interface on XMEGA-B1 Xplain:
- * - RED led close to USB connector is always on after firmware startup
- * - Led 0 is on when USB line is in IDLE mode, and off in SUSPEND mode
- * - Led 1 blinks when USB Host have checked and enabled HID Keyboard interface
- * - The led 2 displays numeric lock status.
- * - The led 3 displays caps lock status.
- * - The switch 0 open a note pad and send key sequence "Atmel AVR USB Keyboard"
- * - All switches can be used to wakeup USB Host in remote wakeup mode.
- */