1 files changed, 0 insertions, 91 deletions
diff --git a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/memories/include/NorFlashIntel.h b/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/memories/include/NorFlashIntel.h
deleted file mode 100644
index 3df6fa3..0000000
--- a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/memories/include/NorFlashIntel.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* ----------------------------------------------------------------------------
- *         ATMEL Microcontroller Software Support
- * ----------------------------------------------------------------------------
- * Copyright (c) 2009, Atmel Corporation
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the disclaimer below.
- *
- * Atmel's name may not be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * ----------------------------------------------------------------------------
- */
-
-/**
- * \file
- *
- * \section Purpose
- *
- * The INTERL %norflash Low-level driver code implement procedures to program
- * basic operations described INTEL-specified command set flash devices.
- * The various commands recognized by the devices are listed in the Commands
- * Tables provided in the corresponding INTEL command set compatible flash
- * datasheets. All operation functions are blocked, they wait for the
- * completion of an operation by polling the status register.
- *
- * \section Usage
- * -# Flash program using INTEL_Write_Data().
- *    - The Program command is used to modify the data stored at the
- *      specified device address. Programming can only change bits
- *      from бо1бп to бо0бп. It may be necessary to erase the block before
- *      programming to addresses within it. Programming modifies a single
- *      Word at a time using static function intel_Program(). Programming
- *      larger amounts of data must be done in one Word at a time by
- *      giving a Program command, waiting for the command to complete,
- *      giving the next Program command and so on.
- * -# erase a block within the flash using INTEL_EraseSector().
- *    - Flash erase is performed on a block basis. An entire block is
- *      erased each time an erase command sequence is given.
- * -# erase whole blocks within the flash using INTEL_EraseChip().
- * -# INTEL_Reset() function can be issued, between Bus Write cycles
- *    before the start of a program or erase operation, to return the
- *    device to read mode.
- * -# INTEL_ReadDeviceID() is used to retrieve information
- *    about the Flash Device type.
- * -# INTEL_ReadManufactoryId() is used to retrieve information
- *    about the Flash Device Manufactory ID.
- */
-
-#ifndef _NORFLASH_INTEL_
-#define _NORFLASH_INTEL_
-
-#include "NorFlashApi.h"
-
-#include <stdint.h>
-
-/*----------------------------------------------------------------------------
- *        Exported functions
- *----------------------------------------------------------------------------*/
-
-extern void INTEL_Reset( NorFlashInfo *pNorFlashInfo, uint32_t address ) ;
-
-extern uint32_t INTEL_ReadManufactoryId( NorFlashInfo *NorFlashInfo ) ;
-
-extern uint32_t INTEL_ReadDeviceID( NorFlashInfo *pNorFlashInfo ) ;
-
-extern uint8_t INTEL_EraseSector( NorFlashInfo *NorFlashInfo, uint32_t sectorAddr ) ;
-
-extern uint8_t INTEL_EraseChip( NorFlashInfo *NorFlashInfo ) ;
-
-extern uint8_t INTEL_Write_Data( NorFlashInfo *NorFlashInfo, uint32_t address, uint8_t *buffer, uint32_t size ) ;
-
-extern const NorFlashOperations intelOperations ;
-
-#endif /* #ifndef _NORFLASH_INTEL_ */
-