/* * Copyright (c) 2007-2022 Douglas Gilbert. * All rights reserved. * Use of this source code is governed by a BSD-style * license that can be found in the BSD_LICENSE file. * * SPDX-License-Identifier: BSD-2-Clause */ #include #ifdef HAVE_CONFIG_H #include "config.h" #else #define SG_SCSI_STRINGS 1 #endif #include "sg_lib.h" #include "sg_lib_data.h" const char * sg_lib_version_str = "2.95 20221104"; /* spc6r06, sbc5r03, zbc2r13 */ /* indexed by pdt; those that map to own index do not decay */ int sg_lib_pdt_decay_arr[32] = { PDT_DISK, PDT_TAPE, PDT_TAPE /* printer */, PDT_PROCESSOR, PDT_DISK /* WO */, PDT_MMC, PDT_SCANNER, PDT_DISK /* optical */, PDT_MCHANGER, PDT_COMMS, 0xa, 0xb, PDT_SAC, PDT_SES, PDT_DISK /* rbc */, PDT_OCRW, PDT_BCC, PDT_OSD, PDT_TAPE /* adc */, PDT_SMD, PDT_DISK /* zbc */, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, PDT_WLUN, PDT_UNKNOWN }; /* SCSI Status values */ struct sg_lib_simple_value_name_t sg_lib_sstatus_str_arr[] = { {0x0, "Good"}, {0x2, "Check Condition"}, {0x4, "Condition Met"}, {0x8, "Busy"}, {0x10, "Intermediate (obsolete)"}, {0x14, "Intermediate-Condition Met (obsolete)"}, {0x18, "Reservation Conflict"}, {0x22, "Command terminated (obsolete)"}, {0x28, "Task Set Full"}, {0x30, "ACA Active"}, {0x40, "Task Aborted"}, {0xffff, NULL}, }; #ifdef SG_SCSI_STRINGS struct sg_lib_value_name_t sg_lib_normal_opcodes[] = { {0, PDT_ALL, "Test Unit Ready"}, {0x1, PDT_ALL, "Rezero Unit"}, {0x1, PDT_TAPE, "Rewind"}, {0x3, PDT_ALL, "Request Sense"}, {0x4, PDT_DISK_ZBC, "Format Unit"}, {0x4, PDT_TAPE, "Format medium"}, {0x4, PDT_PRINTER, "Format"}, {0x5, PDT_TAPE, "Read Block Limits"}, {0x7, PDT_DISK_ZBC, "Reassign Blocks"}, {0x7, PDT_MCHANGER, "Initialize element status"}, {0x8, PDT_DISK_ZBC, "Read(6)"}, /* obsolete in sbc3r30 */ {0x8, PDT_PROCESSOR, "Receive"}, {0xa, PDT_DISK_ZBC, "Write(6)"}, /* obsolete in sbc3r30 */ {0xa, PDT_PRINTER, "Print"}, {0xa, PDT_PROCESSOR, "Send"}, {0xb, PDT_ALL, "Seek(6)"}, {0xb, PDT_TAPE, "Set capacity"}, {0xb, PDT_PRINTER, "Slew and print"}, {0xf, PDT_TAPE, "Read reverse(6)"}, {0x10, PDT_TAPE, "Write filemarks(6)"}, {0x10, PDT_PRINTER, "Synchronize buffer"}, {0x11, PDT_TAPE, "Space(6)"}, {0x12, PDT_ALL, "Inquiry"}, {0x13, PDT_TAPE, "Verify(6)"}, /* SSC */ {0x14, PDT_ALL, "Recover buffered data"}, {0x15, PDT_ALL, "Mode select(6)"},/* sbc3r31 recommends Mode select(10) */ {0x16, PDT_ALL, "Reserve(6)"}, /* obsolete in SPC-4 r11 */ {0x16, PDT_MCHANGER, "Reserve element(6)"}, {0x17, PDT_ALL, "Release(6)"}, /* obsolete in SPC-4 r11 */ {0x17, PDT_MCHANGER, "Release element(6)"}, {0x18, PDT_ALL, "Copy"}, /* obsolete in SPC-4 r11 */ {0x19, PDT_ALL, "Erase(6)"}, {0x1a, PDT_ALL, "Mode sense(6)"},/* sbc3r31 recommends Mode sense(10) */ {0x1b, PDT_ALL, "Start stop unit"}, {0x1b, PDT_TAPE, "Load unload"}, {0x1b, PDT_ADC, "Load unload"}, {0x1b, PDT_PRINTER, "Stop print"}, {0x1c, PDT_ALL, "Receive diagnostic results"}, {0x1d, PDT_ALL, "Send diagnostic"}, {0x1e, PDT_ALL, "Prevent allow medium removal"}, {0x23, PDT_MMC, "Read Format capacities"}, {0x24, PDT_ALL, "Set window"}, {0x25, PDT_ALL, "Read capacity(10)"}, /* sbc3r31 recommends Read capacity(16) */ {0x25, PDT_OCRW, "Read card capacity"}, {0x28, PDT_ALL, "Read(10)"}, /* sbc3r31 recommends Read(16) */ {0x29, PDT_ALL, "Read generation"}, {0x2a, PDT_ALL, "Write(10)"}, /* sbc3r31 recommends Write(16) */ {0x2b, PDT_ALL, "Seek(10)"}, {0x2b, PDT_TAPE, "Locate(10)"}, {0x2b, PDT_MCHANGER, "Position to element"}, {0x2c, PDT_ALL, "Erase(10)"}, {0x2d, PDT_OPTICAL, "Read updated block"}, {0x2e, PDT_ALL, "Write and verify(10)"}, /* sbc3r31 recommends Write and verify(16) */ {0x2f, PDT_ALL, "Verify(10)"}, /* sbc3r31 recommends Verify(16) */ {0x30, PDT_ALL, "Search data high(10)"}, {0x31, PDT_ALL, "Search data equal(10)"}, {0x32, PDT_ALL, "Search data low(10)"}, {0x33, PDT_ALL, "Set limits(10)"}, {0x34, PDT_ALL, "Pre-fetch(10)"}, /* sbc3r31 recommends Pre-fetch(16) */ {0x34, PDT_TAPE, "Read position"}, {0x35, PDT_ALL, "Synchronize cache(10)"}, /* SBC-3 r31 recommends Synchronize cache(16) */ {0x36, PDT_ALL, "Lock unlock cache(10)"}, {0x37, PDT_MCHANGER, "Initialize element status with range"}, {0x37, PDT_ALL, "Read defect data(10)"}, /* SBC-3 r31 recommends Read defect data(12) */ {0x38, PDT_DISK_ZBC, "Format with preset scan"}, {0x38, PDT_OCRW, "Medium scan"}, {0x39, PDT_ALL, "Compare"}, /* obsolete in SPC-4 r11 */ {0x3a, PDT_ALL, "Copy and verify"}, /* obsolete in SPC-4 r11 */ {0x3b, PDT_ALL, "Write buffer"}, {0x3c, PDT_ALL, "Read buffer(10)"}, {0x3d, PDT_OPTICAL, "Update block"}, {0x3e, PDT_ALL, "Read long(10)"}, /* obsolete in SBC-4 r7 */ {0x3f, PDT_ALL, "Write long(10)"}, /* sbc3r31 recommends Write long(16) */ {0x40, PDT_ALL, "Change definition"}, /* obsolete in SPC-4 r11 */ {0x41, PDT_ALL, "Write same(10)"}, /* sbc3r31 recommends Write same(16) */ {0x42, PDT_DISK_ZBC, "Unmap"}, /* added SPC-4 rev 18 */ {0x42, PDT_MMC, "Read sub-channel"}, {0x43, PDT_MMC, "Read TOC/PMA/ATIP"}, {0x44, PDT_ALL, "Report density support"}, {0x45, PDT_MMC, "Play audio(10)"}, {0x46, PDT_MMC, "Get configuration"}, {0x47, PDT_MMC, "Play audio msf"}, {0x48, PDT_ALL, "Sanitize"}, {0x4a, PDT_MMC, "Get event status notification"}, {0x4b, PDT_MMC, "Pause/resume"}, {0x4c, PDT_ALL, "Log select"}, {0x4d, PDT_ALL, "Log sense"}, {0x4e, PDT_MMC, "Stop play/scan"}, {0x50, PDT_DISK, "Xdwrite(10)"}, /* obsolete in SBC-3 r31 */ {0x51, PDT_DISK, "Xpwrite(10)"}, /* obsolete in SBC-4 r15 */ {0x51, PDT_MMC, "Read disk information"}, {0x52, PDT_DISK, "Xdread(10)"}, /* obsolete in SBC-3 r31 */ {0x52, PDT_MMC, "Read track information"}, {0x53, PDT_DISK, "Xdwriteread(10)"}, /* obsolete in SBC-4 r15 */ {0x54, PDT_MMC, "Send OPC information"}, {0x55, PDT_ALL, "Mode select(10)"}, {0x56, PDT_ALL, "Reserve(10)"}, /* obsolete in SPC-4 r11 */ {0x56, PDT_MCHANGER, "Reserve element(10)"}, {0x57, PDT_ALL, "Release(10)"}, /* obsolete in SPC-4 r11 */ {0x57, PDT_MCHANGER, "Release element(10)"}, {0x58, PDT_MMC, "Repair track"}, {0x5a, PDT_ALL, "Mode sense(10)"}, {0x5b, PDT_MMC, "Close track/session"}, {0x5c, PDT_MMC, "Read buffer capacity"}, {0x5d, PDT_MMC, "Send cue sheet"}, {0x5e, PDT_ALL, "Persistent reserve in"}, {0x5f, PDT_ALL, "Persistent reserve out"}, {0x7e, PDT_ALL, "Extended cdb (XCBD)"}, /* added in SPC-4 r12 */ {0x80, PDT_DISK, "Xdwrite extended(16)"}, /* obsolete in SBC-4 r15 */ {0x80, PDT_TAPE, "Write filemarks(16)"}, {0x81, PDT_DISK, "Rebuild(16)"}, {0x81, PDT_TAPE, "Read reverse(16)"}, {0x82, PDT_DISK, "Regenerate(16)"}, {0x83, PDT_ALL, "Third party copy out"},/* Extended copy before spc4r34 */ /* Following was "Receive copy results", before spc4r34 */ {0x84, PDT_ALL, "Third party copy in"}, {0x85, PDT_ALL, "ATA pass-through(16)"}, /* was 0x98 in spc3 rev21c */ {0x86, PDT_ALL, "Access control in"}, {0x87, PDT_ALL, "Access control out"}, {0x88, PDT_ALL, "Read(16)"}, {0x89, PDT_ALL, "Compare and write"}, {0x8a, PDT_ALL, "Write(16)"}, {0x8b, PDT_DISK, "Orwrite(16)"}, {0x8c, PDT_ALL, "Read attribute"}, {0x8d, PDT_ALL, "Write attribute"}, {0x8e, PDT_ALL, "Write and verify(16)"}, {0x8f, PDT_ALL, "Verify(16)"}, {0x90, PDT_ALL, "Pre-fetch(16)"}, {0x91, PDT_ALL, "Synchronize cache(16)"}, {0x91, PDT_TAPE, "Space(16)"}, {0x92, PDT_DISK, "Lock unlock cache(16)"}, {0x92, PDT_TAPE, "Locate(16)"}, {0x93, PDT_ALL, "Write same(16)"}, {0x93, PDT_TAPE, "Erase(16)"}, {0x94, PDT_DISK_ZBC, "ZBC out"}, /* new sbc4r04, has service actions */ {0x95, PDT_DISK_ZBC, "ZBC in"}, /* new sbc4r04, has service actions */ {0x9a, PDT_ALL, "Write stream(16)"}, /* added sbc4r07 */ {0x9b, PDT_ALL, "Read buffer(16)"}, /* added spc5r02 */ {0x9c, PDT_ALL, "Write atomic(16)"}, {0x9d, PDT_ALL, "Service action bidirectional"}, /* added spc4r35 */ {0x9e, PDT_ALL, "Service action in(16)"}, {0x9f, PDT_ALL, "Service action out(16)"}, {0xa0, PDT_ALL, "Report luns"}, {0xa1, PDT_ALL, "ATA pass-through(12)"}, {0xa1, PDT_MMC, "Blank"}, {0xa2, PDT_ALL, "Security protocol in"}, {0xa3, PDT_ALL, "Maintenance in"}, {0xa3, PDT_MMC, "Send key"}, {0xa4, PDT_ALL, "Maintenance out"}, {0xa4, PDT_MMC, "Report key"}, {0xa5, PDT_ALL, "Move medium"}, {0xa5, PDT_MMC, "Play audio(12)"}, {0xa6, PDT_MCHANGER, "Exchange medium"}, {0xa6, PDT_MMC, "Load/unload medium"}, {0xa7, PDT_OPTICAL, "Move medium attached"}, {0xa7, PDT_MMC, "Set read ahead"}, {0xa8, PDT_ALL, "Read(12)"}, /* SBC-3 r31 recommends Read(16) */ {0xa9, PDT_ALL, "Service action out(12)"}, {0xaa, PDT_ALL, "Write(12)"}, /* SBC-3 r31 recommends Write(16) */ {0xab, PDT_ALL, "Service action in(12)"}, {0xac, PDT_OPTICAL, "erase(12)"}, {0xac, PDT_MMC, "Get performance"}, {0xad, PDT_MMC, "Read DVD/BD structure"}, {0xae, PDT_ALL, "Write and verify(12)"}, /* SBC-3 r31 recommends Write and verify(16) */ {0xaf, PDT_ALL, "Verify(12)"}, /* SBC-3 r31 recommends Verify(16) */ {0xb0, PDT_DISK, "Search data high(12)"}, {0xb1, PDT_DISK, "Search data equal(12)"}, {0xb1, PDT_MCHANGER, "Open/close import/export element"}, {0xb2, PDT_DISK, "Search data low(12)"}, {0xb3, PDT_DISK, "Set limits(12)"}, {0xb4, PDT_ALL, "Read element status attached"}, {0xb5, PDT_MCHANGER, "Request volume element address"}, {0xb5, PDT_ALL, "Security protocol out"}, {0xb6, PDT_MCHANGER, "Send volume tag"}, {0xb6, PDT_MMC, "Set streaming"}, {0xb7, PDT_ALL, "Read defect data(12)"}, {0xb8, PDT_ALL, "Read element status"}, {0xb9, PDT_MMC, "Read CD msf"}, {0xba, PDT_MMC, "Scan"}, {0xba, PDT_ALL, "Redundancy group in"}, {0xbb, PDT_ALL, "Redundancy group out"}, {0xbb, PDT_MMC, "Set CD speed"}, {0xbc, PDT_ALL, "Spare in"}, {0xbd, PDT_ALL, "Spare out"}, {0xbd, PDT_MMC, "Mechanism status"}, {0xbe, PDT_MMC, "Read CD"}, {0xbe, PDT_ALL, "Volume set in"}, {0xbf, PDT_MMC, "Send DVD/BD structure"}, {0xbf, PDT_ALL, "Volume set out"}, {0xffff, 0, NULL}, }; /* Read buffer(10) [0x3c] and Read buffer(16) [0x9b] service actions (sa), * need prefix */ struct sg_lib_value_name_t sg_lib_read_buff_arr[] = { {0x0, PDT_ALL, "combined header and data [or multiple modes]"}, {0x2, PDT_ALL, "data"}, {0x3, PDT_ALL, "descriptor"}, {0xa, PDT_ALL, "read data from echo buffer"}, {0xb, PDT_ALL, "echo buffer descriptor"}, {0xf, PDT_ALL, "read microcode status"}, /* added in spc5r20 */ {0x1a, PDT_ALL, "enable expander comms protocol and echo buffer"}, {0x1c, PDT_ALL, "error history"}, {0xffff, 0, NULL}, }; /* Write buffer [0x3b] service actions, need prefix */ struct sg_lib_value_name_t sg_lib_write_buff_arr[] = { {0x0, PDT_ALL, "combined header and data [or multiple modes]"}, {0x2, PDT_ALL, "data"}, {0x4, PDT_ALL, "download microcode and activate"}, {0x5, PDT_ALL, "download microcode, save, and activate"}, {0x6, PDT_ALL, "download microcode with offsets and activate"}, {0x7, PDT_ALL, "download microcode with offsets, save, and activate"}, {0xa, PDT_ALL, "write data to echo buffer"}, {0xd, PDT_ALL, "download microcode with offsets, select activation " "events, save and defer activate"}, {0xe, PDT_ALL, "download microcode with offsets, save and defer activate"}, {0xf, PDT_ALL, "activate deferred microcode"}, {0x1a, PDT_ALL, "enable expander comms protocol and echo buffer"}, {0x1b, PDT_ALL, "disable expander comms protocol"}, {0x1c, PDT_ALL, "download application client error history"}, {0xffff, 0, NULL}, }; /* Read position (SSC) [0x34] service actions, need prefix */ struct sg_lib_value_name_t sg_lib_read_pos_arr[] = { {0x0, PDT_TAPE, "short form - block id"}, {0x1, PDT_TAPE, "short form - vendor specific"}, {0x6, PDT_TAPE, "long form"}, {0x8, PDT_TAPE, "extended form"}, {0xffff, 0, NULL}, }; /* Maintenance in [0xa3] service actions */ struct sg_lib_value_name_t sg_lib_maint_in_arr[] = { {0x0, PDT_SAC, "Report assigned/unassigned p_extent"}, {0x0, PDT_ADC, "Report automation device attributes"}, {0x1, PDT_SAC, "Report component device"}, {0x2, PDT_SAC, "Report component device attachments"}, {0x3, PDT_SAC, "Report peripheral device"}, {0x4, PDT_SAC, "Report peripheral device associations"}, {0x5, PDT_ALL, "Report identifying information"}, /* was "Report device identifier" prior to spc4r07 */ {0x6, PDT_SAC, "Report states"}, {0x7, PDT_SAC, "Report device identification"}, {0x8, PDT_SAC, "Report unconfigured capacity"}, {0x9, PDT_SAC, "Report supported configuration method"}, {0xa, PDT_ALL, "Report target port groups"}, {0xb, PDT_ALL, "Report aliases"}, {0xc, PDT_ALL, "Report supported operation codes"}, {0xd, PDT_ALL, "Report supported task management functions"}, {0xe, PDT_ALL, "Report priority"}, {0xf, PDT_ALL, "Report timestamp"}, {0x10, PDT_ALL, "Management protocol in"}, {0x1d, PDT_DISK, "Report provisioning initialization pattern"}, /* added in sbc4r07, shares sa 0x1d with ssc5r01 (tape) */ {0x1d, PDT_TAPE, "Receive recommended access order"}, {0x1e, PDT_TAPE, "Read dynamic runtime attribute"}, {0x1e, PDT_ADC, "Report automation device attributes"}, {0x1f, PDT_ALL, "Maintenance in vendor specific"}, {0xffff, 0, NULL}, }; /* Maintenance out [0xa4] service actions */ struct sg_lib_value_name_t sg_lib_maint_out_arr[] = { {0x0, PDT_SAC, "Add peripheral device / component device"}, {0x0, PDT_ADC, "Set automation device attribute"}, {0x1, PDT_SAC, "Attach to component device"}, {0x2, PDT_SAC, "Exchange p_extent"}, {0x3, PDT_SAC, "Exchange peripheral device / component device"}, {0x4, PDT_SAC, "Instruct component device"}, {0x5, PDT_SAC, "Remove peripheral device / component device"}, {0x6, PDT_ALL, "Set identifying information"}, /* was "Set device identifier" prior to spc4r07 */ {0x7, PDT_SAC, "Break peripheral device / component device"}, {0xa, PDT_ALL, "Set target port groups"}, {0xb, PDT_ALL, "Change aliases"}, {0xc, PDT_ALL, "Remove I_T nexus"}, {0xe, PDT_ALL, "Set priority"}, {0xf, PDT_ALL, "Set timestamp"}, {0x10, PDT_ALL, "Management protocol out"}, {0x1d, PDT_TAPE, "Generate recommended access order"}, {0x1e, PDT_TAPE, "write dynamic runtime attribute"}, {0x1e, PDT_ADC, "Set automation device attributes"}, {0x1f, PDT_ALL, "Maintenance out vendor specific"}, {0xffff, 0, NULL}, }; /* Sanitize [0x48] service actions, need prefix */ struct sg_lib_value_name_t sg_lib_sanitize_sa_arr[] = { {0x1, PDT_ALL, "overwrite"}, {0x2, PDT_ALL, "block erase"}, {0x3, PDT_ALL, "cryptographic erase"}, {0x1f, PDT_ALL, "exit failure mode"}, {0xffff, 0, NULL}, }; /* Service action in(12) [0xab] service actions */ struct sg_lib_value_name_t sg_lib_serv_in12_arr[] = { {0x1, PDT_ALL, "Read media serial number"}, {0xffff, 0, NULL}, }; /* Service action out(12) [0xa9] service actions */ struct sg_lib_value_name_t sg_lib_serv_out12_arr[] = { {0x1f, PDT_ADC, "Set medium attribute"}, {0xff, PDT_ALL, "Impossible command name"}, {0xffff, 0, NULL}, }; /* Service action in(16) [0x9e] service actions */ struct sg_lib_value_name_t sg_lib_serv_in16_arr[] = { {0xf, PDT_ALL, "Receive binding report"}, /* added spc5r11 */ {0x10, PDT_ALL, "Read capacity(16)"}, {0x11, PDT_ALL, "Read long(16)"}, /* obsolete in SBC-4 r7 */ {0x12, PDT_ALL, "Get LBA status(16)"},/* also 32 byte variant sbc4r14 */ {0x13, PDT_ALL, "Report referrals"}, {0x14, PDT_ALL, "Stream control"}, {0x15, PDT_ALL, "Background control"}, {0x16, PDT_ALL, "Get stream status"}, {0x17, PDT_ALL, "Get physical element status"}, /* added sbc4r13 */ {0x18, PDT_ALL, "Remove element and truncate"}, /* added sbc4r13 */ {0x19, PDT_ALL, "Restore elements and rebuild"}, /* added sbc4r19 */ {0x1a, PDT_ALL, "Remove element and modify zones"}, /* added zbc2r07 */ {0xffff, 0, NULL}, }; /* Service action out(16) [0x9f] service actions */ struct sg_lib_value_name_t sg_lib_serv_out16_arr[] = { {0x0b, PDT_ALL, "Test bind"}, /* added spc5r13 */ {0x0c, PDT_ALL, "Prepare bind report"}, /* added spc5r11 */ {0x0d, PDT_ALL, "Set affiliation"}, {0x0e, PDT_ALL, "Bind"}, {0x0f, PDT_ALL, "Unbind"}, {0x11, PDT_ALL, "Write long(16)"}, {0x12, PDT_ALL, "Write scattered(16)"}, /* added sbc4r11 */ {0x14, PDT_DISK_ZBC, "Reset write pointer"}, {0x1f, PDT_ADC, "Notify data transfer device(16)"}, {0xffff, 0, NULL}, }; /* Service action bidirectional [0x9d] service actions */ struct sg_lib_value_name_t sg_lib_serv_bidi_arr[] = { {0xffff, 0, NULL}, }; /* Persistent reserve in [0x5e] service actions, need prefix */ struct sg_lib_value_name_t sg_lib_pr_in_arr[] = { {0x0, PDT_ALL, "read keys"}, {0x1, PDT_ALL, "read reservation"}, {0x2, PDT_ALL, "report capabilities"}, {0x3, PDT_ALL, "read full status"}, {0xffff, 0, NULL}, }; /* Persistent reserve out [0x5f] service actions, need prefix */ struct sg_lib_value_name_t sg_lib_pr_out_arr[] = { {0x0, PDT_ALL, "register"}, {0x1, PDT_ALL, "reserve"}, {0x2, PDT_ALL, "release"}, {0x3, PDT_ALL, "clear"}, {0x4, PDT_ALL, "preempt"}, {0x5, PDT_ALL, "preempt and abort"}, {0x6, PDT_ALL, "register and ignore existing key"}, {0x7, PDT_ALL, "register and move"}, {0x8, PDT_ALL, "replace lost reservation"}, {0xffff, 0, NULL}, }; /* Third party copy in [0x83] service actions * Opcode 'Receive copy results' was renamed 'Third party copy in' in spc4r34 * LID1 is an abbreviation of List Identifier length of 1 byte. In SPC-5 * LID1 discontinued (references back to SPC-4) and "(LID4)" suffix removed * as there is no need to differentiate. */ struct sg_lib_value_name_t sg_lib_xcopy_sa_arr[] = { /* originating */ {0x0, PDT_ALL, "Extended copy(LID1)"}, {0x1, PDT_ALL, "Extended copy"}, /* 'Extended copy(LID4)' until spc5r01 */ {0x10, PDT_ALL, "Populate token"}, {0x11, PDT_ALL, "Write using token"}, {0x16, PDT_TAPE, "Set tape stream mirroring"}, /* ADC-4 and SSC-5 */ {0x1c, PDT_ALL, "Copy operation abort"}, {0xffff, 0, NULL}, }; /* Third party copy out [0x84] service actions * Opcode 'Extended copy' was renamed 'Third party copy out' in spc4r34 * LID4 is an abbreviation of List Identifier length of 4 bytes */ struct sg_lib_value_name_t sg_lib_rec_copy_sa_arr[] = { /* retrieve */ {0x0, PDT_ALL, "Receive copy status(LID1)"}, {0x1, PDT_ALL, "Receive copy data(LID1)"}, {0x3, PDT_ALL, "Receive copy operating parameters"}, {0x4, PDT_ALL, "Receive copy failure details(LID1)"}, {0x5, PDT_ALL, "Receive copy status"},/* was: Receive copy status(LID4) */ {0x6, PDT_ALL, "Receive copy data"}, /* was: Receive copy data(LID4) */ {0x7, PDT_ALL, "Receive ROD token information"}, {0x8, PDT_ALL, "Report all ROD tokens"}, {0x16, PDT_TAPE, "Report tape stream mirroring"}, /* SSC-5 */ {0xffff, 0, NULL}, }; /* Variable length cdb [0x7f] service actions (more than 16 bytes long) */ struct sg_lib_value_name_t sg_lib_variable_length_arr[] = { {0x1, PDT_ALL, "Rebuild(32)"}, {0x2, PDT_ALL, "Regenerate(32)"}, {0x3, PDT_ALL, "Xdread(32)"}, /* obsolete in SBC-3 r31 */ {0x4, PDT_ALL, "Xdwrite(32)"}, /* obsolete in SBC-3 r31 */ {0x5, PDT_ALL, "Xdwrite extended(32)"}, /* obsolete in SBC-4 r15 */ {0x6, PDT_ALL, "Xpwrite(32)"}, /* obsolete in SBC-4 r15 */ {0x7, PDT_ALL, "Xdwriteread(32)"}, /* obsolete in SBC-4 r15 */ {0x8, PDT_ALL, "Xdwrite extended(64)"}, /* obsolete in SBC-4 r15 */ {0x9, PDT_ALL, "Read(32)"}, {0xa, PDT_ALL, "Verify(32)"}, {0xb, PDT_ALL, "Write(32)"}, {0xc, PDT_ALL, "Write and verify(32)"}, {0xd, PDT_ALL, "Write same(32)"}, {0xe, PDT_ALL, "Orwrite(32)"}, /* added sbc3r25 */ {0xf, PDT_ALL, "Atomic write(32)"}, /* added sbc4r02 */ {0x10, PDT_ALL, "Write stream(32)"}, /* added sbc4r07 */ {0x11, PDT_ALL, "Write scattered(32)"}, /* added sbc4r11 */ {0x12, PDT_ALL, "Get LBA status(32)"}, /* added sbc4r14 */ {0x1800, PDT_ALL, "Receive credential"}, {0x1ff0, PDT_ALL, "ATA pass-through(32)"},/* added sat4r05 */ {0x8801, PDT_ALL, "Format OSD (osd)"}, {0x8802, PDT_ALL, "Create (osd)"}, {0x8803, PDT_ALL, "List (osd)"}, {0x8805, PDT_ALL, "Read (osd)"}, {0x8806, PDT_ALL, "Write (osd)"}, {0x8807, PDT_ALL, "Append (osd)"}, {0x8808, PDT_ALL, "Flush (osd)"}, {0x880a, PDT_ALL, "Remove (osd)"}, {0x880b, PDT_ALL, "Create partition (osd)"}, {0x880c, PDT_ALL, "Remove partition (osd)"}, {0x880e, PDT_ALL, "Get attributes (osd)"}, {0x880f, PDT_ALL, "Set attributes (osd)"}, {0x8812, PDT_ALL, "Create and write (osd)"}, {0x8815, PDT_ALL, "Create collection (osd)"}, {0x8816, PDT_ALL, "Remove collection (osd)"}, {0x8817, PDT_ALL, "List collection (osd)"}, {0x8818, PDT_ALL, "Set key (osd)"}, {0x8819, PDT_ALL, "Set master key (osd)"}, {0x881a, PDT_ALL, "Flush collection (osd)"}, {0x881b, PDT_ALL, "Flush partition (osd)"}, {0x881c, PDT_ALL, "Flush OSD (osd)"}, {0x8880, PDT_ALL, "Object structure check (osd-2)"}, {0x8881, PDT_ALL, "Format OSD (osd-2)"}, {0x8882, PDT_ALL, "Create (osd-2)"}, {0x8883, PDT_ALL, "List (osd-2)"}, {0x8884, PDT_ALL, "Punch (osd-2)"}, {0x8885, PDT_ALL, "Read (osd-2)"}, {0x8886, PDT_ALL, "Write (osd-2)"}, {0x8887, PDT_ALL, "Append (osd-2)"}, {0x8888, PDT_ALL, "Flush (osd-2)"}, {0x8889, PDT_ALL, "Clear (osd-2)"}, {0x888a, PDT_ALL, "Remove (osd-2)"}, {0x888b, PDT_ALL, "Create partition (osd-2)"}, {0x888c, PDT_ALL, "Remove partition (osd-2)"}, {0x888e, PDT_ALL, "Get attributes (osd-2)"}, {0x888f, PDT_ALL, "Set attributes (osd-2)"}, {0x8892, PDT_ALL, "Create and write (osd-2)"}, {0x8895, PDT_ALL, "Create collection (osd-2)"}, {0x8896, PDT_ALL, "Remove collection (osd-2)"}, {0x8897, PDT_ALL, "List collection (osd-2)"}, {0x8898, PDT_ALL, "Set key (osd-2)"}, {0x8899, PDT_ALL, "Set master key (osd-2)"}, {0x889a, PDT_ALL, "Flush collection (osd-2)"}, {0x889b, PDT_ALL, "Flush partition (osd-2)"}, {0x889c, PDT_ALL, "Flush OSD (osd-2)"}, {0x88a0, PDT_ALL, "Query (osd-2)"}, {0x88a1, PDT_ALL, "Remove member objects (osd-2)"}, {0x88a2, PDT_ALL, "Get member attributes (osd-2)"}, {0x88a3, PDT_ALL, "Set member attributes (osd-2)"}, {0x88b1, PDT_ALL, "Read map (osd-2)"}, {0x8f7c, PDT_ALL, "Perform SCSI command (osd-2)"}, {0x8f7d, PDT_ALL, "Perform task management function (osd-2)"}, {0x8f7e, PDT_ALL, "Perform SCSI command (osd)"}, {0x8f7f, PDT_ALL, "Perform task management function (osd)"}, {0xffff, 0, NULL}, }; /* Zoning out [0x94] service actions */ struct sg_lib_value_name_t sg_lib_zoning_out_arr[] = { {0x1, PDT_DISK_ZBC, "Close zone"}, {0x2, PDT_DISK_ZBC, "Finish zone"}, {0x3, PDT_DISK_ZBC, "Open zone"}, {0x4, PDT_DISK_ZBC, "Reset write pointer"}, {0x10, PDT_DISK_ZBC, "Sequentialize zone"}, /* zbc2r01b */ {0xffff, 0, NULL}, }; /* Zoning in [0x95] service actions */ struct sg_lib_value_name_t sg_lib_zoning_in_arr[] = { {0x0, PDT_DISK_ZBC, "Report zones"}, {0x6, PDT_DISK_ZBC, "Report realms"}, /* zbc2r04 */ {0x7, PDT_DISK_ZBC, "Report zone domains"}, /* zbc2r04 */ {0x8, PDT_DISK_ZBC, "Zone activate"}, /* zbc2r04 */ {0x9, PDT_DISK_ZBC, "Zone query"}, /* zbc2r04 */ {0xffff, 0, NULL}, }; const char * sg_lib_tapealert_strs[] = { "", /* 0x0 */ "Read warning", "Write warning", "Hard error", "Media", "Read failure", "Write failure", "Media life", "Not data grade", /* 0x8 */ "Write protect", "No removal", "Cleaning media", "Unsupported format", "Recoverable mechanical cartridge failure", "Unrecoverable mechanical cartridge failure", "Memory chip in cartridge failure", "Forced eject", /* 0x10 */ "Read only format", "Tape directory corrupted on load", "Nearing media life", "Cleaning required", "Cleaning requested", "Expired cleaning media", "Invalid cleaning tape", "Retension requested", /* 0x18 */ "Dual port interface error", "Cooling fan failing", "Power supply failure", "Power consumption", "Drive maintenance", "Hardware A", "Hardware B", "Interface", /* 0x20 */ "Eject media", "Microcode update fail", "Drive humidity", "Drive temperature", "Drive voltage", "Predictive failure", "Diagnostics required", "Reserved (28h)", /* 0x28 */ "Reserved (29h)", "Reserved (2Ah)", "Reserved (2Bh)", "Reserved (2Ch)", "Reserved (2Dh)", "Reserved (2Eh)", "External data encryption control - communications failure", "External data encryption control - key manager returned error",/* 0x30 */ "Diminished native capacity", "Lost statistics", "Tape directory invalid at unload", "Tape system area write failure", "Tape system area read failure", "No start of data", "Loading failure", "Unrecoverable unload failure", /* 0x38 */ "Automation interface failure", "Firmware failure", "WORM medium - integrity check failed", "WORM medium - overwrite attempted", "Encryption policy violation", "Reserved (3Eh)", "Reserved (3Fh)", "Reserved (40h)", /* 0x40 */ NULL, }; /* Read attribute [0x8c] service actions */ struct sg_lib_value_name_t sg_lib_read_attr_arr[] = { {0x0, PDT_ALL, "attribute values"}, {0x1, PDT_ALL, "attribute list"}, {0x2, PDT_ALL, "logical volume list"}, {0x3, PDT_ALL, "partition list"}, {0x5, PDT_ALL, "supported attributes"}, {0xffff, 0, NULL}, }; #else /* SG_SCSI_STRINGS */ struct sg_lib_value_name_t sg_lib_normal_opcodes[] = { {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_read_buff_arr[] = { /* opcode 0x3c */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_write_buff_arr[] = { /* opcode 0x3b */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_read_pos_arr[] = { /* opcode 0x34 (SSC) */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_maint_in_arr[] = { /* opcode 0xa3 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_maint_out_arr[] = { /* opcode 0xa4 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_sanitize_sa_arr[] = { /* opcode 0x94 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_in12_arr[] = { /* opcode 0xab */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_out12_arr[] = { /* opcode 0xa9 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_in16_arr[] = { /* opcode 0x9e */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_out16_arr[] = { /* opcode 0x9f */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_bidi_arr[] = { /* opcode 0x9d */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_pr_in_arr[] = { /* opcode 0x5e */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_pr_out_arr[] = { /* opcode 0x5f */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_xcopy_sa_arr[] = { /* opcode 0x83 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_rec_copy_sa_arr[] = { /* opcode 0x84 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_variable_length_arr[] = { {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_zoning_out_arr[] = { {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_zoning_in_arr[] = { {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_read_attr_arr[] = { {0xffff, 0, NULL}, }; const char * sg_lib_tapealert_strs[] = { NULL, }; #endif /* SG_SCSI_STRINGS */ /* A conveniently formatted list of SCSI ASC/ASCQ codes and their * corresponding text can be found at: www.t10.org/lists/asc-num.txt * The following should match asc-num.txt dated 20200817 */ #ifdef SG_SCSI_STRINGS struct sg_lib_asc_ascq_range_t sg_lib_asc_ascq_range[] = { {0x40,0x01,0x7f,"Ram failure [0x%x]"}, {0x40,0x80,0xff,"Diagnostic failure on component [0x%x]"}, {0x41,0x01,0xff,"Data path failure [0x%x]"}, {0x42,0x01,0xff,"Power-on or self-test failure [0x%x]"}, {0x4d,0x00,0xff,"Tagged overlapped commands [0x%x]"}, {0x70,0x00,0xff,"Decompression exception short algorithm id of 0x%x"}, {0, 0, 0, NULL} }; struct sg_lib_asc_ascq_t sg_lib_asc_ascq[] = { {0x00,0x00,"No additional sense information"}, {0x00,0x01,"Filemark detected"}, {0x00,0x02,"End-of-partition/medium detected"}, {0x00,0x03,"Setmark detected"}, {0x00,0x04,"Beginning-of-partition/medium detected"}, {0x00,0x05,"End-of-data detected"}, {0x00,0x06,"I/O process terminated"}, {0x00,0x07,"Programmable early warning detected"}, {0x00,0x11,"Audio play operation in progress"}, {0x00,0x12,"Audio play operation paused"}, {0x00,0x13,"Audio play operation successfully completed"}, {0x00,0x14,"Audio play operation stopped due to error"}, {0x00,0x15,"No current audio status to return"}, {0x00,0x16,"operation in progress"}, {0x00,0x17,"Cleaning requested"}, {0x00,0x18,"Erase operation in progress"}, {0x00,0x19,"Locate operation in progress"}, {0x00,0x1a,"Rewind operation in progress"}, {0x00,0x1b,"Set capacity operation in progress"}, {0x00,0x1c,"Verify operation in progress"}, {0x00,0x1d,"ATA pass through information available"}, {0x00,0x1e,"Conflicting SA creation request"}, {0x00,0x1f,"Logical unit transitioning to another power condition"}, {0x00,0x20,"Extended copy information available"}, {0x00,0x21,"Atomic command aborted due to ACA"}, {0x00,0x22,"Deferred microcode is pending"}, {0x01,0x00,"No index/sector signal"}, {0x02,0x00,"No seek complete"}, {0x03,0x00,"Peripheral device write fault"}, {0x03,0x01,"No write current"}, {0x03,0x02,"Excessive write errors"}, {0x04,0x00,"Logical unit not ready, cause not reportable"}, {0x04,0x01,"Logical unit is in process of becoming ready"}, {0x04,0x02,"Logical unit not ready, " "initializing command required"}, {0x04,0x03,"Logical unit not ready, " "manual intervention required"}, {0x04,0x04,"Logical unit not ready, format in progress"}, {0x04,0x05,"Logical unit not ready, rebuild in progress"}, {0x04,0x06,"Logical unit not ready, recalculation in progress"}, {0x04,0x07,"Logical unit not ready, operation in progress"}, {0x04,0x08,"Logical unit not ready, long write in progress"}, {0x04,0x09,"Logical unit not ready, self-test in progress"}, {0x04,0x0a,"Logical unit " "not accessible, asymmetric access state transition"}, {0x04,0x0b,"Logical unit " "not accessible, target port in standby state"}, {0x04,0x0c,"Logical unit " "not accessible, target port in unavailable state"}, {0x04,0x0d,"Logical unit not ready, structure check required"}, {0x04,0x0e,"Logical unit not ready, security session in progress"}, {0x04,0x10,"Logical unit not ready, " "auxiliary memory not accessible"}, {0x04,0x11,"Logical unit not ready, " "notify (enable spinup) required"}, {0x04,0x12,"Logical unit not ready, offline"}, {0x04,0x13,"Logical unit not ready, SA creation in progress"}, {0x04,0x14,"Logical unit not ready, space allocation in progress"}, {0x04,0x15,"Logical unit not ready, robotics disabled"}, {0x04,0x16,"Logical unit not ready, configuration required"}, {0x04,0x17,"Logical unit not ready, calibration required"}, {0x04,0x18,"Logical unit not ready, a door is open"}, {0x04,0x19,"Logical unit not ready, operating in sequential mode"}, {0x04,0x1a,"Logical unit not ready, start stop unit command in progress"}, {0x04,0x1b,"Logical unit not ready, sanitize in progress"}, {0x04,0x1c,"Logical unit not ready, additional power use not yet " "granted"}, {0x04,0x1d,"Logical unit not ready, configuration in progress"}, {0x04,0x1e,"Logical unit not ready, microcode activation required"}, {0x04,0x1f,"Logical unit not ready, microcode download required"}, {0x04,0x20,"Logical unit not ready, logical unit reset required"}, {0x04,0x21,"Logical unit not ready, hard reset required"}, {0x04,0x22,"Logical unit not ready, power cycle required"}, {0x04,0x23,"Logical unit not ready, affiliation required"}, {0x04,0x24,"Depopulation in progress"}, /* spc5r15 */ {0x04,0x25,"Depopulation restoration in progress"}, /* spc6r02 */ {0x05,0x00,"Logical unit does not respond to selection"}, {0x06,0x00,"No reference position found"}, {0x07,0x00,"Multiple peripheral devices selected"}, {0x08,0x00,"Logical unit communication failure"}, {0x08,0x01,"Logical unit communication time-out"}, {0x08,0x02,"Logical unit communication parity error"}, {0x08,0x03,"Logical unit communication CRC error (Ultra-DMA/32)"}, {0x08,0x04,"Unreachable copy target"}, {0x09,0x00,"Track following error"}, {0x09,0x01,"Tracking servo failure"}, {0x09,0x02,"Focus servo failure"}, {0x09,0x03,"Spindle servo failure"}, {0x09,0x04,"Head select fault"}, {0x09,0x05,"Vibration induced tracking error"}, {0x0A,0x00,"Error log overflow"}, {0x0B,0x00,"Warning"}, {0x0B,0x01,"Warning - specified temperature exceeded"}, {0x0B,0x02,"Warning - enclosure degraded"}, {0x0B,0x03,"Warning - background self-test failed"}, {0x0B,0x04,"Warning - background pre-scan detected medium error"}, {0x0B,0x05,"Warning - background medium scan detected medium error"}, {0x0B,0x06,"Warning - non-volatile cache now volatile"}, {0x0B,0x07,"Warning - degraded power to non-volatile cache"}, {0x0B,0x08,"Warning - power loss expected"}, {0x0B,0x09,"Warning - device statistics notification active"}, {0x0B,0x0A,"Warning - high critical temperature limit exceeded"}, {0x0B,0x0B,"Warning - low critical temperature limit exceeded"}, {0x0B,0x0C,"Warning - high operating temperature limit exceeded"}, {0x0B,0x0D,"Warning - low operating temperature limit exceeded"}, {0x0B,0x0E,"Warning - high critical humidity limit exceeded"}, {0x0B,0x0F,"Warning - low critical humidity limit exceeded"}, {0x0B,0x10,"Warning - high operating humidity limit exceeded"}, {0x0B,0x11,"Warning - low operating humidity limit exceeded"}, {0x0B,0x12,"Warning - microcode security at risk"}, {0x0B,0x13,"Warning - microcode digital signature validation failure"}, {0x0B,0x14,"Warning - physical element status change"}, /* spc5r15 */ {0x0C,0x00,"Write error"}, {0x0C,0x01,"Write error - recovered with auto reallocation"}, {0x0C,0x02,"Write error - auto reallocation failed"}, {0x0C,0x03,"Write error - recommend reassignment"}, {0x0C,0x04,"Compression check miscompare error"}, {0x0C,0x05,"Data expansion occurred during compression"}, {0x0C,0x06,"Block not compressible"}, {0x0C,0x07,"Write error - recovery needed"}, {0x0C,0x08,"Write error - recovery failed"}, {0x0C,0x09,"Write error - loss of streaming"}, {0x0C,0x0A,"Write error - padding blocks added"}, {0x0C,0x0B,"Auxiliary memory write error"}, {0x0C,0x0C,"Write error - unexpected unsolicited data"}, {0x0C,0x0D,"Write error - not enough unsolicited data"}, {0x0C,0x0E,"Multiple write errors"}, {0x0C,0x0F,"Defects in error window"}, {0x0C,0x10,"Incomplete multiple atomic write operations"}, {0x0C,0x11,"Write error - recovery scan needed"}, {0x0C,0x12,"Write error - insufficient zone resources"}, {0x0D,0x00,"Error detected by third party temporary initiator"}, {0x0D,0x01,"Third party device failure"}, {0x0D,0x02,"Copy target device not reachable"}, {0x0D,0x03,"Incorrect copy target device type"}, {0x0D,0x04,"Copy target device data underrun"}, {0x0D,0x05,"Copy target device data overrun"}, {0x0E,0x00,"Invalid information unit"}, {0x0E,0x01,"Information unit too short"}, {0x0E,0x02,"Information unit too long"}, {0x0E,0x03,"Invalid field in command information unit"}, {0x10,0x00,"Id CRC or ECC error"}, {0x10,0x01,"Logical block guard check failed"}, {0x10,0x02,"Logical block application tag check failed"}, {0x10,0x03,"Logical block reference tag check failed"}, {0x10,0x04,"Logical block protection error on recover buffered data"}, {0x10,0x05,"Logical block protection method error"}, {0x11,0x00,"Unrecovered read error"}, {0x11,0x01,"Read retries exhausted"}, {0x11,0x02,"Error too long to correct"}, {0x11,0x03,"Multiple read errors"}, {0x11,0x04,"Unrecovered read error - auto reallocate failed"}, {0x11,0x05,"L-EC uncorrectable error"}, {0x11,0x06,"CIRC unrecovered error"}, {0x11,0x07,"Data re-synchronization error"}, {0x11,0x08,"Incomplete block read"}, {0x11,0x09,"No gap found"}, {0x11,0x0A,"Miscorrected error"}, {0x11,0x0B,"Unrecovered read error - recommend reassignment"}, {0x11,0x0C,"Unrecovered read error - recommend rewrite the data"}, {0x11,0x0D,"De-compression CRC error"}, {0x11,0x0E,"Cannot decompress using declared algorithm"}, {0x11,0x0F,"Error reading UPC/EAN number"}, {0x11,0x10,"Error reading ISRC number"}, {0x11,0x11,"Read error - loss of streaming"}, {0x11,0x12,"Auxiliary memory read error"}, {0x11,0x13,"Read error - failed retransmission request"}, {0x11,0x14,"Read error - LBA marked bad by application client"}, {0x11,0x15,"Write after sanitize required"}, {0x12,0x00,"Address mark not found for id field"}, {0x13,0x00,"Address mark not found for data field"}, {0x14,0x00,"Recorded entity not found"}, {0x14,0x01,"Record not found"}, {0x14,0x02,"Filemark or setmark not found"}, {0x14,0x03,"End-of-data not found"}, {0x14,0x04,"Block sequence error"}, {0x14,0x05,"Record not found - recommend reassignment"}, {0x14,0x06,"Record not found - data auto-reallocated"}, {0x14,0x07,"Locate operation failure"}, {0x15,0x00,"Random positioning error"}, {0x15,0x01,"Mechanical positioning error"}, {0x15,0x02,"Positioning error detected by read of medium"}, {0x16,0x00,"Data synchronization mark error"}, {0x16,0x01,"Data sync error - data rewritten"}, {0x16,0x02,"Data sync error - recommend rewrite"}, {0x16,0x03,"Data sync error - data auto-reallocated"}, {0x16,0x04,"Data sync error - recommend reassignment"}, {0x17,0x00,"Recovered data with no error correction applied"}, {0x17,0x01,"Recovered data with retries"}, {0x17,0x02,"Recovered data with positive head offset"}, {0x17,0x03,"Recovered data with negative head offset"}, {0x17,0x04,"Recovered data with retries and/or circ applied"}, {0x17,0x05,"Recovered data using previous sector id"}, {0x17,0x06,"Recovered data without ECC - data auto-reallocated"}, {0x17,0x07,"Recovered data without ECC - recommend reassignment"}, {0x17,0x08,"Recovered data without ECC - recommend rewrite"}, {0x17,0x09,"Recovered data without ECC - data rewritten"}, {0x18,0x00,"Recovered data with error correction applied"}, {0x18,0x01,"Recovered data with error corr. & retries applied"}, {0x18,0x02,"Recovered data - data auto-reallocated"}, {0x18,0x03,"Recovered data with CIRC"}, {0x18,0x04,"Recovered data with L-EC"}, {0x18,0x05,"Recovered data - recommend reassignment"}, {0x18,0x06,"Recovered data - recommend rewrite"}, {0x18,0x07,"Recovered data with ECC - data rewritten"}, {0x18,0x08,"Recovered data with linking"}, {0x19,0x00,"Defect list error"}, {0x19,0x01,"Defect list not available"}, {0x19,0x02,"Defect list error in primary list"}, {0x19,0x03,"Defect list error in grown list"}, {0x1A,0x00,"Parameter list length error"}, {0x1B,0x00,"Synchronous data transfer error"}, {0x1C,0x00,"Defect list not found"}, {0x1C,0x01,"Primary defect list not found"}, {0x1C,0x02,"Grown defect list not found"}, {0x1D,0x00,"Miscompare during verify operation"}, {0x1D,0x01,"Miscompare verify of unmapped lba"}, {0x1E,0x00,"Recovered id with ECC correction"}, {0x1F,0x00,"Partial defect list transfer"}, {0x20,0x00,"Invalid command operation code"}, {0x20,0x01,"Access denied - initiator pending-enrolled"}, {0x20,0x02,"Access denied - no access rights"}, {0x20,0x03,"Access denied - invalid mgmt id key"}, {0x20,0x04,"Illegal command while in write capable state"}, {0x20,0x05,"Write type operation while in read capable state (obs)"}, {0x20,0x06,"Illegal command while in explicit address mode"}, {0x20,0x07,"Illegal command while in implicit address mode"}, {0x20,0x08,"Access denied - enrollment conflict"}, {0x20,0x09,"Access denied - invalid LU identifier"}, {0x20,0x0A,"Access denied - invalid proxy token"}, {0x20,0x0B,"Access denied - ACL LUN conflict"}, {0x20,0x0C,"Illegal command when not in append-only mode"}, {0x20,0x0D,"Not an administrative logical unit"}, {0x20,0x0E,"Not a subsidiary logical unit"}, {0x20,0x0F,"Not a conglomerate logical unit"}, {0x21,0x00,"Logical block address out of range"}, {0x21,0x01,"Invalid element address"}, {0x21,0x02,"Invalid address for write"}, {0x21,0x03,"Invalid write crossing layer jump"}, {0x21,0x04,"Unaligned write command"}, {0x21,0x05,"Write boundary violation"}, {0x21,0x06,"Attempt to read invalid data"}, {0x21,0x07,"Read boundary violation"}, {0x21,0x08,"Misaligned write command"}, {0x21,0x09,"Attempt to access gap zone"}, {0x22,0x00,"Illegal function (use 20 00, 24 00, or 26 00)"}, {0x23,0x00,"Invalid token operation, cause not reportable"}, {0x23,0x01,"Invalid token operation, unsupported token type"}, {0x23,0x02,"Invalid token operation, remote token usage not supported"}, {0x23,0x03,"invalid token operation, remote rod token creation not " "supported"}, {0x23,0x04,"Invalid token operation, token unknown"}, {0x23,0x05,"Invalid token operation, token corrupt"}, {0x23,0x06,"Invalid token operation, token revoked"}, {0x23,0x07,"Invalid token operation, token expired"}, {0x23,0x08,"Invalid token operation, token cancelled"}, {0x23,0x09,"Invalid token operation, token deleted"}, {0x23,0x0a,"Invalid token operation, invalid token length"}, {0x24,0x00,"Invalid field in cdb"}, {0x24,0x01,"CDB decryption error"}, {0x24,0x02,"Invalid cdb field while in explicit block model (obs)"}, {0x24,0x03,"Invalid cdb field while in implicit block model (obs)"}, {0x24,0x04,"Security audit value frozen"}, {0x24,0x05,"Security working key frozen"}, {0x24,0x06,"Nonce not unique"}, {0x24,0x07,"Nonce timestamp out of range"}, {0x24,0x08,"Invalid xcdb"}, {0x24,0x09,"Invalid fast format"}, {0x25,0x00,"Logical unit not supported"}, {0x26,0x00,"Invalid field in parameter list"}, {0x26,0x01,"Parameter not supported"}, {0x26,0x02,"Parameter value invalid"}, {0x26,0x03,"Threshold parameters not supported"}, {0x26,0x04,"Invalid release of persistent reservation"}, {0x26,0x05,"Data decryption error"}, {0x26,0x06,"Too many target descriptors"}, {0x26,0x07,"Unsupported target descriptor type code"}, {0x26,0x08,"Too many segment descriptors"}, {0x26,0x09,"Unsupported segment descriptor type code"}, {0x26,0x0A,"Unexpected inexact segment"}, {0x26,0x0B,"Inline data length exceeded"}, {0x26,0x0C,"Invalid operation for copy source or destination"}, {0x26,0x0D,"Copy segment granularity violation"}, {0x26,0x0E,"Invalid parameter while port is enabled"}, {0x26,0x0F,"Invalid data-out buffer integrity check value"}, {0x26,0x10,"Data decryption key fail limit reached"}, {0x26,0x11,"Incomplete key-associated data set"}, {0x26,0x12,"Vendor specific key reference not found"}, {0x26,0x13,"Application tag mode page is invalid"}, {0x26,0x14,"Tape stream mirroring prevented"}, {0x26,0x15,"Copy source or copy destination not authorized"}, {0x26,0x16,"Fast copy not possible"}, {0x27,0x00,"Write protected"}, {0x27,0x01,"Hardware write protected"}, {0x27,0x02,"Logical unit software write protected"}, {0x27,0x03,"Associated write protect"}, {0x27,0x04,"Persistent write protect"}, {0x27,0x05,"Permanent write protect"}, {0x27,0x06,"Conditional write protect"}, {0x27,0x07,"Space allocation failed write protect"}, {0x27,0x08,"Zone is read only"}, {0x28,0x00,"Not ready to ready change, medium may have changed"}, {0x28,0x01,"Import or export element accessed"}, {0x28,0x02,"Format-layer may have changed"}, {0x28,0x03,"Import/export element accessed, medium changed"}, {0x29,0x00,"Power on, reset, or bus device reset occurred"}, {0x29,0x01,"Power on occurred"}, {0x29,0x02,"SCSI bus reset occurred"}, {0x29,0x03,"Bus device reset function occurred"}, {0x29,0x04,"Device internal reset"}, {0x29,0x05,"Transceiver mode changed to single-ended"}, {0x29,0x06,"Transceiver mode changed to lvd"}, {0x29,0x07,"I_T nexus loss occurred"}, {0x2A,0x00,"Parameters changed"}, {0x2A,0x01,"Mode parameters changed"}, {0x2A,0x02,"Log parameters changed"}, {0x2A,0x03,"Reservations preempted"}, {0x2A,0x04,"Reservations released"}, {0x2A,0x05,"Registrations preempted"}, {0x2A,0x06,"Asymmetric access state changed"}, {0x2A,0x07,"Implicit asymmetric access state transition failed"}, {0x2A,0x08,"Priority changed"}, {0x2A,0x09,"Capacity data has changed"}, {0x2A,0x0c, "Error recovery attributes have changed"}, {0x2A,0x0d, "Data encryption capabilities changed"}, {0x2A,0x10,"Timestamp changed"}, {0x2A,0x11,"Data encryption parameters changed by another i_t nexus"}, {0x2A,0x12,"Data encryption parameters changed by vendor specific event"}, {0x2A,0x13,"Data encryption key instance counter has changed"}, {0x2A,0x0a,"Error history i_t nexus cleared"}, {0x2A,0x0b,"Error history snapshot released"}, {0x2A,0x14,"SA creation capabilities data has changed"}, {0x2A,0x15,"Medium removal prevention preempted"}, {0x2A,0x16,"Zone reset write pointer recommended"}, {0x2B,0x00,"Copy cannot execute since host cannot disconnect"}, {0x2C,0x00,"Command sequence error"}, {0x2C,0x01,"Too many windows specified"}, {0x2C,0x02,"Invalid combination of windows specified"}, {0x2C,0x03,"Current program area is not empty"}, {0x2C,0x04,"Current program area is empty"}, {0x2C,0x05,"Illegal power condition request"}, {0x2C,0x06,"Persistent prevent conflict"}, {0x2C,0x07,"Previous busy status"}, {0x2C,0x08,"Previous task set full status"}, {0x2C,0x09,"Previous reservation conflict status"}, {0x2C,0x0A,"Partition or collection contains user objects"}, {0x2C,0x0B,"Not reserved"}, {0x2C,0x0C,"ORWRITE generation does not match"}, {0x2C,0x0D,"Reset write pointer not allowed"}, {0x2C,0x0E,"Zone is offline"}, {0x2C,0x0F,"Stream not open"}, {0x2C,0x10,"Unwritten data in zone"}, {0x2C,0x11,"Descriptor format sense data required"}, {0x2C,0x12,"Zone is inactive"}, {0x2C,0x13,"Well known logical unit access required"}, /* spc6r02 */ {0x2D,0x00,"Overwrite error on update in place"}, {0x2E,0x00,"Insufficient time for operation"}, {0x2E,0x01,"Command timeout before processing"}, {0x2E,0x02,"Command timeout during processing"}, {0x2E,0x03,"Command timeout during processing due to error recovery"}, {0x2F,0x00,"Commands cleared by another initiator"}, {0x2F,0x01,"Commands cleared by power loss notification"}, {0x2F,0x02,"Commands cleared by device server"}, {0x2F,0x03,"Some commands cleared by queuing layer event"}, {0x30,0x00,"Incompatible medium installed"}, {0x30,0x01,"Cannot read medium - unknown format"}, {0x30,0x02,"Cannot read medium - incompatible format"}, {0x30,0x03,"Cleaning cartridge installed"}, {0x30,0x04,"Cannot write medium - unknown format"}, {0x30,0x05,"Cannot write medium - incompatible format"}, {0x30,0x06,"Cannot format medium - incompatible medium"}, {0x30,0x07,"Cleaning failure"}, {0x30,0x08,"Cannot write - application code mismatch"}, {0x30,0x09,"Current session not fixated for append"}, {0x30,0x0A,"Cleaning request rejected"}, {0x30,0x0B,"Cleaning tape expired"}, {0x30,0x0C,"WORM medium - overwrite attempted"}, {0x30,0x0D,"WORM medium - integrity check"}, {0x30,0x10,"Medium not formatted"}, {0x30,0x11,"Incompatible volume type"}, {0x30,0x12,"Incompatible volume qualifier"}, {0x30,0x13,"Cleaning volume expired"}, {0x31,0x00,"Medium format corrupted"}, {0x31,0x01,"Format command failed"}, {0x31,0x02,"Zoned formatting failed due to spare linking"}, {0x31,0x03,"Sanitize command failed"}, {0x31,0x04,"Depopulation failed"}, /* spc5r15 */ {0x31,0x05,"Depopulation restoration failed"}, /* spc6r02 */ {0x32,0x00,"No defect spare location available"}, {0x32,0x01,"Defect list update failure"}, {0x33,0x00,"Tape length error"}, {0x34,0x00,"Enclosure failure"}, {0x35,0x00,"Enclosure services failure"}, {0x35,0x01,"Unsupported enclosure function"}, {0x35,0x02,"Enclosure services unavailable"}, {0x35,0x03,"Enclosure services transfer failure"}, {0x35,0x04,"Enclosure services transfer refused"}, {0x35,0x05,"Enclosure services checksum error"}, {0x36,0x00,"Ribbon, ink, or toner failure"}, {0x37,0x00,"Rounded parameter"}, {0x38,0x00,"Event status notification"}, {0x38,0x02,"Esn - power management class event"}, {0x38,0x04,"Esn - media class event"}, {0x38,0x06,"Esn - device busy class event"}, {0x38,0x07,"Thin provisioning soft threshold reached"}, {0x38,0x08,"Depopulation interrupted"}, /* spc6r03 */ {0x39,0x00,"Saving parameters not supported"}, {0x3A,0x00,"Medium not present"}, {0x3A,0x01,"Medium not present - tray closed"}, {0x3A,0x02,"Medium not present - tray open"}, {0x3A,0x03,"Medium not present - loadable"}, {0x3A,0x04,"Medium not present - medium auxiliary memory accessible"}, {0x3B,0x00,"Sequential positioning error"}, {0x3B,0x01,"Tape position error at beginning-of-medium"}, {0x3B,0x02,"Tape position error at end-of-medium"}, {0x3B,0x03,"Tape or electronic vertical forms unit not ready"}, {0x3B,0x04,"Slew failure"}, {0x3B,0x05,"Paper jam"}, {0x3B,0x06,"Failed to sense top-of-form"}, {0x3B,0x07,"Failed to sense bottom-of-form"}, {0x3B,0x08,"Reposition error"}, {0x3B,0x09,"Read past end of medium"}, {0x3B,0x0A,"Read past beginning of medium"}, {0x3B,0x0B,"Position past end of medium"}, {0x3B,0x0C,"Position past beginning of medium"}, {0x3B,0x0D,"Medium destination element full"}, {0x3B,0x0E,"Medium source element empty"}, {0x3B,0x0F,"End of medium reached"}, {0x3B,0x11,"Medium magazine not accessible"}, {0x3B,0x12,"Medium magazine removed"}, {0x3B,0x13,"Medium magazine inserted"}, {0x3B,0x14,"Medium magazine locked"}, {0x3B,0x15,"Medium magazine unlocked"}, {0x3B,0x16,"Mechanical positioning or changer error"}, {0x3B,0x17,"Read past end of user object"}, {0x3B,0x18,"Element disabled"}, {0x3B,0x19,"Element enabled"}, {0x3B,0x1a,"Data transfer device removed"}, {0x3B,0x1b,"Data transfer device inserted"}, {0x3B,0x1c,"Too many logical objects on partition to support operation"}, {0x3B,0x20,"Element static information changed"}, {0x3D,0x00,"Invalid bits in identify message"}, {0x3E,0x00,"Logical unit has not self-configured yet"}, {0x3E,0x01,"Logical unit failure"}, {0x3E,0x02,"Timeout on logical unit"}, {0x3E,0x03,"Logical unit failed self-test"}, {0x3E,0x04,"Logical unit unable to update self-test log"}, {0x3F,0x00,"Target operating conditions have changed"}, {0x3F,0x01,"Microcode has been changed"}, {0x3F,0x02,"Changed operating definition"}, {0x3F,0x03,"Inquiry data has changed"}, {0x3F,0x04,"Component device attached"}, {0x3F,0x05,"Device identifier changed"}, {0x3F,0x06,"Redundancy group created or modified"}, {0x3F,0x07,"Redundancy group deleted"}, {0x3F,0x08,"Spare created or modified"}, {0x3F,0x09,"Spare deleted"}, {0x3F,0x0A,"Volume set created or modified"}, {0x3F,0x0B,"Volume set deleted"}, {0x3F,0x0C,"Volume set deassigned"}, {0x3F,0x0D,"Volume set reassigned"}, {0x3F,0x0E,"Reported luns data has changed"}, {0x3F,0x0F,"Echo buffer overwritten"}, {0x3F,0x10,"Medium loadable"}, {0x3F,0x11,"Medium auxiliary memory accessible"}, {0x3F,0x12,"iSCSI IP address added"}, {0x3F,0x13,"iSCSI IP address removed"}, {0x3F,0x14,"iSCSI IP address changed"}, {0x3F,0x15,"Inspect referrals sense descriptors"}, {0x3F,0x16,"Microcode has been changed without reset"}, {0x3F,0x17,"Zone transition to full"}, {0x3F,0x18,"Bind completed"}, {0x3F,0x19,"Bind redirected"}, {0x3F,0x1A,"Subsidiary binding changed"}, /* * ASC 0x40, 0x41 and 0x42 overridden by "additional2" array entries * for ascq > 1. Preferred error message for this group is * "Diagnostic failure on component nn (80h-ffh)". */ {0x40,0x00,"Ram failure (should use 40 nn)"}, {0x41,0x00,"Data path failure (should use 40 nn)"}, {0x42,0x00,"Power-on or self-test failure (should use 40 nn)"}, {0x43,0x00,"Message error"}, {0x44,0x00,"Internal target failure"}, {0x44,0x01,"Persistent reservation information lost"}, {0x44,0x71,"ATA device failed Set Features"}, {0x45,0x00,"Select or reselect failure"}, {0x46,0x00,"Unsuccessful soft reset"}, {0x47,0x00,"SCSI parity error"}, {0x47,0x01,"Data phase CRC error detected"}, {0x47,0x02,"SCSI parity error detected during st data phase"}, {0x47,0x03,"Information unit iuCRC error detected"}, {0x47,0x04,"Asynchronous information protection error detected"}, {0x47,0x05,"Protocol service CRC error"}, {0x47,0x06,"Phy test function in progress"}, {0x47,0x7F,"Some commands cleared by iSCSI protocol event"}, {0x48,0x00,"Initiator detected error message received"}, {0x49,0x00,"Invalid message error"}, {0x4A,0x00,"Command phase error"}, {0x4B,0x00,"Data phase error"}, {0x4B,0x01,"Invalid target port transfer tag received"}, {0x4B,0x02,"Too much write data"}, {0x4B,0x03,"Ack/nak timeout"}, {0x4B,0x04,"Nak received"}, {0x4B,0x05,"Data offset error"}, {0x4B,0x06,"Initiator response timeout"}, {0x4B,0x07,"Connection lost"}, {0x4B,0x08,"Data-in buffer overflow - data buffer size"}, {0x4B,0x09,"Data-in buffer overflow - data buffer descriptor area"}, {0x4B,0x0A,"Data-in buffer error"}, {0x4B,0x0B,"Data-out buffer overflow - data buffer size"}, {0x4B,0x0C,"Data-out buffer overflow - data buffer descriptor area"}, {0x4B,0x0D,"Data-out buffer error"}, {0x4B,0x0E,"PCIe fabric error"}, {0x4B,0x0f,"PCIe completion timeout"}, {0x4B,0x10,"PCIe completer abort"}, {0x4B,0x11,"PCIe poisoned tlp received"}, {0x4B,0x12,"PCIe ecrc check failed"}, {0x4B,0x13,"PCIe unsupported request"}, {0x4B,0x14,"PCIe acs violation"}, {0x4B,0x15,"PCIe tlp prefix blocked"}, {0x4C,0x00,"Logical unit failed self-configuration"}, /* * ASC 0x4D overridden by an "additional2" array entry * so there is no need to have them here. */ /* {0x4D,0x00,"Tagged overlapped commands (nn = queue tag)"}, */ {0x4E,0x00,"Overlapped commands attempted"}, {0x50,0x00,"Write append error"}, {0x50,0x01,"Write append position error"}, {0x50,0x02,"Position error related to timing"}, {0x51,0x00,"Erase failure"}, {0x51,0x01,"Erase failure - incomplete erase operation detected"}, {0x52,0x00,"Cartridge fault"}, {0x53,0x00,"Media load or eject failed"}, {0x53,0x01,"Unload tape failure"}, {0x53,0x02,"Medium removal prevented"}, {0x53,0x03,"Medium removal prevented by data transfer element"}, {0x53,0x04,"Medium thread or unthread failure"}, {0x53,0x05,"Volume identifier invalid"}, {0x53,0x06,"Volume identifier missing"}, {0x53,0x07,"Duplicate volume identifier"}, {0x53,0x08,"Element status unknown"}, {0x53,0x09,"Data transfer device error - load failed"}, {0x53,0x0A,"Data transfer device error - unload failed"}, {0x53,0x0B,"Data transfer device error - unload missing"}, {0x53,0x0C,"Data transfer device error - eject failed"}, {0x53,0x0D,"Data transfer device error - library communication failed"}, {0x54,0x00,"SCSI to host system interface failure"}, {0x55,0x00,"System resource failure"}, {0x55,0x01,"System buffer full"}, {0x55,0x02,"Insufficient reservation resources"}, {0x55,0x03,"Insufficient resources"}, {0x55,0x04,"Insufficient registration resources"}, {0x55,0x05,"Insufficient access control resources"}, {0x55,0x06,"Auxiliary memory out of space"}, {0x55,0x07,"Quota error"}, {0x55,0x08,"Maximum number of supplemental decryption keys exceeded"}, {0x55,0x09,"Medium auxiliary memory not accessible"}, {0x55,0x0a,"Data currently unavailable"}, {0x55,0x0b,"Insufficient power for operation"}, {0x55,0x0c,"Insufficient resources to create rod"}, {0x55,0x0d,"Insufficient resources to create rod token"}, {0x55,0x0e,"Insufficient zone resources"}, {0x55,0x0f,"Insufficient zone resources to complete write"}, {0x55,0x10,"Maximum number of streams open"}, {0x55,0x11,"Insufficient resources to bind"}, {0x57,0x00,"Unable to recover table-of-contents"}, {0x58,0x00,"Generation does not exist"}, {0x59,0x00,"Updated block read"}, {0x5A,0x00,"Operator request or state change input"}, {0x5A,0x01,"Operator medium removal request"}, {0x5A,0x02,"Operator selected write protect"}, {0x5A,0x03,"Operator selected write permit"}, {0x5B,0x00,"Log exception"}, {0x5B,0x01,"Threshold condition met"}, {0x5B,0x02,"Log counter at maximum"}, {0x5B,0x03,"Log list codes exhausted"}, {0x5C,0x00,"Rpl status change"}, {0x5C,0x01,"Spindles synchronized"}, {0x5C,0x02,"Spindles not synchronized"}, {0x5D,0x00,"Failure prediction threshold exceeded"}, {0x5D,0x01,"Media failure prediction threshold exceeded"}, {0x5D,0x02,"Logical unit failure prediction threshold exceeded"}, {0x5D,0x03,"spare area exhaustion prediction threshold exceeded"}, {0x5D,0x10,"Hardware impending failure general hard drive failure"}, {0x5D,0x11,"Hardware impending failure drive error rate too high" }, {0x5D,0x12,"Hardware impending failure data error rate too high" }, {0x5D,0x13,"Hardware impending failure seek error rate too high" }, {0x5D,0x14,"Hardware impending failure too many block reassigns"}, {0x5D,0x15,"Hardware impending failure access times too high" }, {0x5D,0x16,"Hardware impending failure start unit times too high" }, {0x5D,0x17,"Hardware impending failure channel parametrics"}, {0x5D,0x18,"Hardware impending failure controller detected"}, {0x5D,0x19,"Hardware impending failure throughput performance"}, {0x5D,0x1A,"Hardware impending failure seek time performance"}, {0x5D,0x1B,"Hardware impending failure spin-up retry count"}, {0x5D,0x1C,"Hardware impending failure drive calibration retry count"}, {0x5D,0x1D,"Hardware impending failure power loss protection circuit"}, {0x5D,0x20,"Controller impending failure general hard drive failure"}, {0x5D,0x21,"Controller impending failure drive error rate too high" }, {0x5D,0x22,"Controller impending failure data error rate too high" }, {0x5D,0x23,"Controller impending failure seek error rate too high" }, {0x5D,0x24,"Controller impending failure too many block reassigns"}, {0x5D,0x25,"Controller impending failure access times too high" }, {0x5D,0x26,"Controller impending failure start unit times too high" }, {0x5D,0x27,"Controller impending failure channel parametrics"}, {0x5D,0x28,"Controller impending failure controller detected"}, {0x5D,0x29,"Controller impending failure throughput performance"}, {0x5D,0x2A,"Controller impending failure seek time performance"}, {0x5D,0x2B,"Controller impending failure spin-up retry count"}, {0x5D,0x2C,"Controller impending failure drive calibration retry count"}, {0x5D,0x30,"Data channel impending failure general hard drive failure"}, {0x5D,0x31,"Data channel impending failure drive error rate too high" }, {0x5D,0x32,"Data channel impending failure data error rate too high" }, {0x5D,0x33,"Data channel impending failure seek error rate too high" }, {0x5D,0x34,"Data channel impending failure too many block reassigns"}, {0x5D,0x35,"Data channel impending failure access times too high" }, {0x5D,0x36,"Data channel impending failure start unit times too high" }, {0x5D,0x37,"Data channel impending failure channel parametrics"}, {0x5D,0x38,"Data channel impending failure controller detected"}, {0x5D,0x39,"Data channel impending failure throughput performance"}, {0x5D,0x3A,"Data channel impending failure seek time performance"}, {0x5D,0x3B,"Data channel impending failure spin-up retry count"}, {0x5D,0x3C,"Data channel impending failure drive calibration retry count"}, {0x5D,0x40,"Servo impending failure general hard drive failure"}, {0x5D,0x41,"Servo impending failure drive error rate too high" }, {0x5D,0x42,"Servo impending failure data error rate too high" }, {0x5D,0x43,"Servo impending failure seek error rate too high" }, {0x5D,0x44,"Servo impending failure too many block reassigns"}, {0x5D,0x45,"Servo impending failure access times too high" }, {0x5D,0x46,"Servo impending failure start unit times too high" }, {0x5D,0x47,"Servo impending failure channel parametrics"}, {0x5D,0x48,"Servo impending failure controller detected"}, {0x5D,0x49,"Servo impending failure throughput performance"}, {0x5D,0x4A,"Servo impending failure seek time performance"}, {0x5D,0x4B,"Servo impending failure spin-up retry count"}, {0x5D,0x4C,"Servo impending failure drive calibration retry count"}, {0x5D,0x50,"Spindle impending failure general hard drive failure"}, {0x5D,0x51,"Spindle impending failure drive error rate too high" }, {0x5D,0x52,"Spindle impending failure data error rate too high" }, {0x5D,0x53,"Spindle impending failure seek error rate too high" }, {0x5D,0x54,"Spindle impending failure too many block reassigns"}, {0x5D,0x55,"Spindle impending failure access times too high" }, {0x5D,0x56,"Spindle impending failure start unit times too high" }, {0x5D,0x57,"Spindle impending failure channel parametrics"}, {0x5D,0x58,"Spindle impending failure controller detected"}, {0x5D,0x59,"Spindle impending failure throughput performance"}, {0x5D,0x5A,"Spindle impending failure seek time performance"}, {0x5D,0x5B,"Spindle impending failure spin-up retry count"}, {0x5D,0x5C,"Spindle impending failure drive calibration retry count"}, {0x5D,0x60,"Firmware impending failure general hard drive failure"}, {0x5D,0x61,"Firmware impending failure drive error rate too high" }, {0x5D,0x62,"Firmware impending failure data error rate too high" }, {0x5D,0x63,"Firmware impending failure seek error rate too high" }, {0x5D,0x64,"Firmware impending failure too many block reassigns"}, {0x5D,0x65,"Firmware impending failure access times too high" }, {0x5D,0x66,"Firmware impending failure start unit times too high" }, {0x5D,0x67,"Firmware impending failure channel parametrics"}, {0x5D,0x68,"Firmware impending failure controller detected"}, {0x5D,0x69,"Firmware impending failure throughput performance"}, {0x5D,0x6A,"Firmware impending failure seek time performance"}, {0x5D,0x6B,"Firmware impending failure spin-up retry count"}, {0x5D,0x6C,"Firmware impending failure drive calibration retry count"}, {0x5D,0x73,"Media impending failure endurance limit met"}, {0x5D,0xFF,"Failure prediction threshold exceeded (false)"}, {0x5E,0x00,"Low power condition on"}, {0x5E,0x01,"Idle condition activated by timer"}, {0x5E,0x02,"Standby condition activated by timer"}, {0x5E,0x03,"Idle condition activated by command"}, {0x5E,0x04,"Standby condition activated by command"}, {0x5E,0x05,"Idle_b condition activated by timer"}, {0x5E,0x06,"Idle_b condition activated by command"}, {0x5E,0x07,"Idle_c condition activated by timer"}, {0x5E,0x08,"Idle_c condition activated by command"}, {0x5E,0x09,"Standby_y condition activated by timer"}, {0x5E,0x0a,"Standby_y condition activated by command"}, {0x5E,0x41,"Power state change to active"}, {0x5E,0x42,"Power state change to idle"}, {0x5E,0x43,"Power state change to standby"}, {0x5E,0x45,"Power state change to sleep"}, {0x5E,0x47,"Power state change to device control"}, {0x60,0x00,"Lamp failure"}, {0x61,0x00,"Video acquisition error"}, {0x61,0x01,"Unable to acquire video"}, {0x61,0x02,"Out of focus"}, {0x62,0x00,"Scan head positioning error"}, {0x63,0x00,"End of user area encountered on this track"}, {0x63,0x01,"Packet does not fit in available space"}, {0x64,0x00,"Illegal mode for this track"}, {0x64,0x01,"Invalid packet size"}, {0x65,0x00,"Voltage fault"}, {0x66,0x00,"Automatic document feeder cover up"}, {0x66,0x01,"Automatic document feeder lift up"}, {0x66,0x02,"Document jam in automatic document feeder"}, {0x66,0x03,"Document miss feed automatic in document feeder"}, {0x67,0x00,"Configuration failure"}, {0x67,0x01,"Configuration of incapable logical units failed"}, {0x67,0x02,"Add logical unit failed"}, {0x67,0x03,"Modification of logical unit failed"}, {0x67,0x04,"Exchange of logical unit failed"}, {0x67,0x05,"Remove of logical unit failed"}, {0x67,0x06,"Attachment of logical unit failed"}, {0x67,0x07,"Creation of logical unit failed"}, {0x67,0x08,"Assign failure occurred"}, {0x67,0x09,"Multiply assigned logical unit"}, {0x67,0x0A,"Set target port groups command failed"}, {0x67,0x0B,"ATA device feature not enabled"}, {0x67,0x0C,"Command rejected"}, {0x67,0x0D,"Explicit bind not allowed"}, {0x68,0x00,"Logical unit not configured"}, {0x68,0x01,"Subsidiary logical unit not configured"}, {0x69,0x00,"Data loss on logical unit"}, {0x69,0x01,"Multiple logical unit failures"}, {0x69,0x02,"Parity/data mismatch"}, {0x6A,0x00,"Informational, refer to log"}, {0x6B,0x00,"State change has occurred"}, {0x6B,0x01,"Redundancy level got better"}, {0x6B,0x02,"Redundancy level got worse"}, {0x6C,0x00,"Rebuild failure occurred"}, {0x6D,0x00,"Recalculate failure occurred"}, {0x6E,0x00,"Command to logical unit failed"}, {0x6F,0x00,"Copy protection key exchange failure - authentication " "failure"}, {0x6F,0x01,"Copy protection key exchange failure - key not present"}, {0x6F,0x02,"Copy protection key exchange failure - key not established"}, {0x6F,0x03,"Read of scrambled sector without authentication"}, {0x6F,0x04,"Media region code is mismatched to logical unit region"}, {0x6F,0x05,"Drive region must be permanent/region reset count error"}, {0x6F,0x06,"Insufficient block count for binding nonce recording"}, {0x6F,0x07,"Conflict in binding nonce recording"}, {0x6F,0x08,"Insufficient permission"}, {0x6F,0x09,"Invalid drive-host pairing server"}, {0x6F,0x0A,"Drive-host pairing suspended"}, /* * ASC 0x70 overridden by an "additional2" array entry * so there is no need to have them here. */ /* {0x70,0x00,"Decompression exception short algorithm id of nn"}, */ {0x71,0x00,"Decompression exception long algorithm id"}, {0x72,0x00,"Session fixation error"}, {0x72,0x01,"Session fixation error writing lead-in"}, {0x72,0x02,"Session fixation error writing lead-out"}, {0x72,0x03,"Session fixation error - incomplete track in session"}, {0x72,0x04,"Empty or partially written reserved track"}, {0x72,0x05,"No more track reservations allowed"}, {0x72,0x06,"RMZ extension is not allowed"}, {0x72,0x07,"No more test zone extensions are allowed"}, {0x73,0x00,"CD control error"}, {0x73,0x01,"Power calibration area almost full"}, {0x73,0x02,"Power calibration area is full"}, {0x73,0x03,"Power calibration area error"}, {0x73,0x04,"Program memory area update failure"}, {0x73,0x05,"Program memory area is full"}, {0x73,0x06,"RMA/PMA is almost full"}, {0x73,0x10,"Current power calibration area almost full"}, {0x73,0x11,"Current power calibration area is full"}, {0x73,0x17,"RDZ is full"}, {0x74,0x00,"Security error"}, {0x74,0x01,"Unable to decrypt data"}, {0x74,0x02,"Unencrypted data encountered while decrypting"}, {0x74,0x03,"Incorrect data encryption key"}, {0x74,0x04,"Cryptographic integrity validation failed"}, {0x74,0x05,"Error decrypting data"}, {0x74,0x06,"Unknown signature verification key"}, {0x74,0x07,"Encryption parameters not usable"}, {0x74,0x08,"Digital signature validation failure"}, {0x74,0x09,"Encryption mode mismatch on read"}, {0x74,0x0a,"Encrypted block not raw read enabled"}, {0x74,0x0b,"Incorrect Encryption parameters"}, {0x74,0x0c,"Unable to decrypt parameter list"}, {0x74,0x0d,"Encryption algorithm disabled"}, {0x74,0x10,"SA creation parameter value invalid"}, {0x74,0x11,"SA creation parameter value rejected"}, {0x74,0x12,"Invalid SA usage"}, {0x74,0x21,"Data encryption configuration prevented"}, {0x74,0x30,"SA creation parameter not supported"}, {0x74,0x40,"Authentication failed"}, {0x74,0x61,"External data encryption key manager access error"}, {0x74,0x62,"External data encryption key manager error"}, {0x74,0x63,"External data encryption key not found"}, {0x74,0x64,"External data encryption request not authorized"}, {0x74,0x6e,"External data encryption control timeout"}, {0x74,0x6f,"External data encryption control error"}, {0x74,0x71,"Logical unit access not authorized"}, {0x74,0x79,"Security conflict in translated device"}, {0, 0, NULL} }; #else /* SG_SCSI_STRINGS */ struct sg_lib_asc_ascq_range_t sg_lib_asc_ascq_range[] = { {0, 0, 0, NULL} }; struct sg_lib_asc_ascq_t sg_lib_asc_ascq[] = { {0, 0, NULL} }; #endif /* SG_SCSI_STRINGS */ const char * sg_lib_sense_key_desc[] = { "No Sense", /* Filemark, ILI and/or EOM; progress indication (during FORMAT); power condition sensing (REQUEST SENSE) */ "Recovered Error", /* The last command completed successfully but used error correction */ "Not Ready", /* The addressed target is not ready */ "Medium Error", /* Data error detected on the medium */ "Hardware Error", /* Controller or device failure */ "Illegal Request", "Unit Attention", /* Removable medium was changed, or the target has been reset */ "Data Protect", /* Access to the data is blocked */ "Blank Check", /* Reached unexpected written or unwritten region of the medium */ "Vendor specific(9)", /* Vendor specific */ "Copy Aborted", /* COPY or COMPARE was aborted */ "Aborted Command", /* The target aborted the command */ "Equal", /* SEARCH DATA found data equal (obsolete) */ "Volume Overflow", /* Medium full with data to be written */ "Miscompare", /* Source data and data on the medium do not agree */ "Completed" /* may occur for successful cmd (spc4r23) */ }; const char * sg_lib_pdt_strs[32] = { /* should have 2**5 elements */ /* 0 */ "disk", "tape", "printer", /* obsolete, spc5r01 */ "processor", /* often SAF-TE device, copy manager */ "write once optical disk", /* obsolete, spc5r01 */ /* 5 */ "cd/dvd", "scanner", /* obsolete */ "optical memory device", "medium changer", "communications", /* obsolete */ /* 0xa */ "graphics [0xa]", /* obsolete */ "graphics [0xb]", /* obsolete */ "storage array controller", "enclosure services device", "simplified direct access device", "optical card reader/writer device", /* 0x10 */ "bridge controller commands", "object based storage", "automation/driver interface", "security manager device", /* obsolete, spc5r01 */ "host managed zoned block", "0x15", "0x16", "0x17", "0x18", "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "well known logical unit", "unknown or no device type", /* coupled with PQ=3 for not accessible via this lu's port (try the other) */ }; const char * sg_lib_transport_proto_strs[] = { "Fibre Channel Protocol for SCSI (FCP-5)", /* now at fcp5r01 */ "SCSI Parallel Interface (SPI-5)", /* obsolete in spc5r01 */ "Serial Storage Architecture SCSI-3 Protocol (SSA-S3P)", "Serial Bus Protocol for IEEE 1394 (SBP-3)", "SCSI RDMA Protocol (SRP)", "Internet SCSI (iSCSI)", "Serial Attached SCSI Protocol (SPL-4)", "Automation/Drive Interface Transport (ADT-2)", "AT Attachment Interface (ACS-2)", /* 0x8 */ "USB Attached SCSI (UAS-2)", "SCSI over PCI Express (SOP)", "PCIe", /* added in spc5r02 */ "Oxc", "Oxd", "Oxe", "No specific protocol" }; /* SCSI Feature Sets array. code->value, pdt->peri_dev_type (-1 for SPC) */ struct sg_lib_value_name_t sg_lib_scsi_feature_sets[] = { {SCSI_FS_SPC_DISCOVERY_2016, -1, "Discovery 2016"}, {SCSI_FS_SBC_BASE_2010, PDT_DISK, "SBC Base 2010"}, {SCSI_FS_SBC_BASE_2016, PDT_DISK, "SBC Base 2016"}, {SCSI_FS_SBC_BASIC_PROV_2016, PDT_DISK, "Basic provisioning 2016"}, {SCSI_FS_SBC_DRIVE_MAINT_2016, PDT_DISK, "Drive maintenance 2016"}, {SCSI_FS_ZBC_HOST_AWARE_2020, PDT_DISK_ZBC, "Host Aware 2020"}, {SCSI_FS_ZBC_HOST_MANAGED_2020, PDT_DISK_ZBC, "Host Managed 2020"}, {SCSI_FS_ZBC_DOMAINS_REALMS_2020, PDT_DISK_ZBC, "Domains and Realms 2020"}, {0x0, 0, NULL}, /* 0x0 is reserved sfs; trailing sentinel */ }; #if (SG_SCSI_STRINGS && HAVE_NVME && (! IGNORE_NVME)) /* Commands sent to the NVMe Admin Queue (queue id 0) have the following * names in the NVM Express 1.3a document dated 20171024 */ struct sg_lib_simple_value_name_t sg_lib_nvme_admin_cmd_arr[] = { {0x0, "Delete I/O Submission Queue"}, /* first mandatory command */ {0x1, "Create I/O Submission Queue"}, {0x2, "Get Log Page"}, {0x4, "Delete I/O Completion Queue"}, {0x5, "Create I/O Completion Queue"}, {0x6, "Identify"}, {0x8, "Abort"}, {0x9, "Set Features"}, {0xa, "Get Features"}, {0xc, "Asynchronous Event Request"}, /* last mandatory command */ {0xd, "Namespace Management"}, /* first optional command */ {0x10, "Firmware commit"}, {0x11, "Firmware image download"}, {0x14, "Device Self-test"}, {0x15, "Namespace Attachment"}, {0x18, "Keep Alive"}, {0x19, "Directive Send"}, {0x1a, "Directive Receive"}, {0x1c, "Virtualization Management"}, {0x1d, "NVMe-MI Send"}, /* SES SEND DIAGNOSTIC cmd passes thru here */ {0x1e, "NVMe-MI Receive"}, /* RECEIVE DIAGNOSTIC RESULTS thru here */ {0x7c, "Doorbell Buffer Config"}, {0x7f, "NVMe over Fabrics"}, /* I/O command set specific 0x80 to 0xbf */ {0x80, "Format NVM"}, /* first NVM specific */ {0x81, "Security Send"}, {0x82, "Security Receive"}, {0x84, "Sanitize"}, /* last NVM specific in 1.3a */ {0x86, "Get LBA status"}, /* NVM specific, new in 1.4 */ /* Vendor specific 0xc0 to 0xff */ {0xffff, NULL}, /* Sentinel */ }; /* Commands sent any NVMe non-Admin Queue (queue id >0) for the NVM command * set have the following names in the NVM Express 1.3a document dated * 20171024 */ struct sg_lib_simple_value_name_t sg_lib_nvme_nvm_cmd_arr[] = { {0x0, "Flush"}, /* first mandatory command */ {0x1, "Write"}, {0x2, "Read"}, /* last mandatory command */ {0x4, "Write Uncorrectable"}, /* first optional command */ {0x5, "Compare"}, {0x8, "Write Zeroes"}, {0x9, "Dataset Management"}, {0xd, "Reservation Register"}, {0xe, "Reservation Report"}, {0x11, "Reservation Acquire"}, {0x15, "Reservation Release"}, /* last optional command in 1.3a */ /* Vendor specific 0x80 to 0xff */ {0xffff, NULL}, /* Sentinel */ }; /* .value is completion queue's DW3 as follows: ((DW3 >> 17) & 0x3ff) * .peri_dev_type is an index for the sg_lib_scsi_status_sense_arr[] * .name is taken from NVMe 1.3a document, section 4.6.1.2.1 with less * capitalization. * NVMe term bits 31:17 of DW3 in the completion field as the "Status * Field" (SF). Bit 31 is "Do not retry" (DNR) and bit 30 is "More" (M). * Bits 29:28 are reserved, bit 27:25 are the "Status Code Type" (SCT) * and bits 24:17 are the Status Code (SC). This table is in ascending * order of its .value field so a binary search could be done on it. */ struct sg_lib_value_name_t sg_lib_nvme_cmd_status_arr[] = { /* Generic command status values, Status Code Type (SCT): 0h * Lowest 8 bits are the Status Code (SC), in this case: * 00h - 7Fh: Applicable to Admin Command Set, or across multiple * command sets * 80h - BFh: I/O Command Set Specific status codes * c0h - FFh: I/O Vendor Specific status codes */ {0x0, 0, "Successful completion"}, {0x1, 1, "Invalid command opcode"}, {0x2, 2, "Invalid field in command"}, {0x3, 2, "Command id conflict"}, {0x4, 3, "Data transfer error"}, {0x5, 4, "Command aborted due to power loss notification"}, {0x6, 5, "Internal error"}, {0x7, 6, "Command abort requested"}, {0x8, 6, "Command aborted due to SQ deletion"}, {0x9, 6, "Command aborted due to failed fused command"}, {0xa, 6, "Command aborted due to missing fused command"}, {0xb, 7, "Invalid namespace or format"}, {0xc, 5, "Command sequence error"}, {0xd, 5, "Invalid SGL segment descriptor"}, {0xe, 5, "Invalid number of SGL descriptors"}, {0xf, 5, "Data SGL length invalid"}, {0x10, 5, "Metadata SGL length invalid"}, {0x11, 5, "SGL descriptor type invalid"}, {0x12, 5, "Invalid use of controller memory buffer"}, {0x13, 5, "PRP offset invalid"}, {0x14, 2, "Atomic write unit exceeded"}, {0x15, 8, "Operation denied"}, {0x16, 5, "SGL offset invalid"}, {0x17, 5, "Reserved [0x17]"}, {0x18, 5, "Host identifier inconsistent format"}, {0x19, 5, "Keep alive timeout expired"}, {0x1a, 5, "Keep alive timeout invalid"}, {0x1b, 6, "Command aborted due to Preempt and Abort"}, {0x1c, 10, "Sanitize failed"}, {0x1d, 11, "Sanitize in progress"}, {0x1e, 5, "SGL data block granularity invalid"}, {0x1f, 5, "Command not supported for queue in CMB"}, {0x20, 18, "Namespace is write protected"}, /* NVMe 1.4 */ {0x21, 6, "Command interrupted"}, /* NVMe 1.4 */ {0x22, 5, "Transient transport error"}, /* NVMe 1.4 */ {0x23, 5, "Prohibited by lockdown"}, /* NVMe 2.0 */ {0x24, 5, "Admin command: media not ready"}, /* NVMe 2.0 */ /* 0x80 - 0xbf: I/O command set specific */ /* Command specific status values, NVM (I/O) Command Set */ {0x80, 12, "LBA out of range"}, {0x81, 3, "Capacity exceeded"}, {0x82, 13, "Namespace not ready"}, {0x83, 14, "Reservation conflict"}, {0x84, 15, "Format in progress"}, {0x85, 2, "Invalid value size"}, {0x86, 2, "Invalid key size"}, {0x87, 2, "KV key does not exist"}, {0x88, 15, "Unrecovered error"}, {0x89, 2, "Key exists"}, /* Command specific status values, ZNS (NVM) Command Set */ {0xb8, 0x1f, "Zone boundary error"}, {0xb9, 0x2, "Zone is full"}, {0xba, 0x1b, "Zone is read only"}, {0xbb, 0x1c, "Zone is offline"}, {0xbc, 2, "Zone invalid write"}, {0xbd, 0x20, "Too many active zones"}, {0xbe, 0x20, "Too many open zones"}, {0xbf, 2, "Invalid zone state transition"}, /* 0xc0 - 0xff: vendor specific */ /* Command specific status values, Status Code Type (SCT): 1h */ {0x100, 5, "Completion queue invalid"}, {0x101, 5, "Invalid queue identifier"}, {0x102, 5, "Invalid queue size"}, {0x103, 5, "Abort command limit exceeded"}, {0x104, 5, "Reserved [0x104]"}, {0x105, 5, "Asynchronous event request limit exceeded"}, {0x106, 5, "Invalid firmware slot"}, {0x107, 5, "Invalid firmware image"}, {0x108, 5, "Invalid interrupt vector"}, {0x109, 5, "Invalid log page"}, {0x10a,16, "Invalid format"}, {0x10b, 5, "Firmware activation requires conventional reset"}, {0x10c, 5, "Invalid queue deletion"}, {0x10d, 5, "Feature identifier not saveable"}, {0x10e, 5, "Feature not changeable"}, {0x10f, 5, "Feature not namespace specific"}, {0x110, 5, "Firmware activation requires NVM subsystem reset"}, {0x111, 5, "Firmware activation requires reset"}, {0x112, 5, "Firmware activation requires maximum time violation"}, {0x113, 5, "Firmware activation prohibited"}, {0x114, 5, "Overlapping range"}, {0x115, 5, "Namespace insufficient capacity"}, {0x116, 5, "Namespace identifier unavailable"}, {0x117, 5, "Reserved [0x107]"}, {0x118, 5, "Namespace already attached"}, {0x119, 5, "Namespace is private"}, {0x11a, 5, "Namespace not attached"}, {0x11b, 3, "Thin provisioning not supported"}, {0x11c, 3, "Controller list invalid"}, {0x11d,17, "Device self-test in progress"}, {0x11e,18, "Boot partition write prohibited"}, {0x11f, 5, "Invalid controller identifier"}, {0x120, 5, "Invalid secondary controller state"}, {0x121, 5, "Invalid number of controller resources"}, {0x122, 5, "Invalid resource identifier"}, {0x123, 5, "Sanitize prohibited while PM enabled"}, /* NVMe 1.4 */ {0x124, 5, "ANA group identifier invalid"}, /* NVMe 1.4 */ {0x125, 5, "ANA attach failed"}, /* NVMe 1.4 */ /* Command specific status values, Status Code Type (SCT): 1h * for NVM (I/O) Command Set */ {0x180, 2, "Conflicting attributes"}, {0x181,19, "Invalid protection information"}, {0x182,18, "Attempted write to read only range"}, /* 0x1c0 - 0x1ff: vendor specific */ /* Media and Data Integrity error values, Status Code Type (SCT): 2h */ {0x280,20, "Write fault"}, {0x281,21, "Unrecovered read error"}, {0x282,22, "End-to-end guard check error"}, {0x283,23, "End-to-end application tag check error"}, {0x284,24, "End-to-end reference tag check error"}, {0x285,25, "Compare failure"}, {0x286, 8, "Access denied"}, {0x287,26, "Deallocated or unwritten logical block"}, /* 0x2c0 - 0x2ff: vendor specific */ /* Leave this Sentinel value at end of this array */ {0x3ff, 0, NULL}, }; /* The sg_lib_nvme_cmd_status_arr[n].peri_dev_type field is an index * to this array. It allows an NVMe status (error) value to be mapped * to this SCSI tuple: status, sense_key, additional sense code (asc) and * asc qualifier (ascq). For brevity SAM_STAT_CHECK_CONDITION is written * as 0x2. */ struct sg_lib_4tuple_u8 sg_lib_scsi_status_sense_arr[] = { /* SCSI Status, SCSI sense key, ASC, ASCQ */ /* index: 0 */ {SAM_STAT_GOOD, SPC_SK_NO_SENSE, 0, 0}, /* it's all good */ {SAM_STAT_CHECK_CONDITION, SPC_SK_ILLEGAL_REQUEST, 0x20, 0x0},/* opcode */ {0x2, SPC_SK_ILLEGAL_REQUEST, 0x24, 0x0}, /* field in cdb */ {0x2, SPC_SK_MEDIUM_ERROR, 0x0, 0x0}, {SAM_STAT_TASK_ABORTED, SPC_SK_ABORTED_COMMAND, 0xb, 0x8}, {0x2, SPC_SK_HARDWARE_ERROR, 0x44, 0x0}, /* internal error */ {SAM_STAT_TASK_ABORTED, SPC_SK_ABORTED_COMMAND, 0x0, 0x0}, {0x2, SPC_SK_ILLEGAL_REQUEST, 0x20, 0x9}, /* invalid LU */ /* index: 8 */ {0x2, SPC_SK_ILLEGAL_REQUEST, 0x20, 0x2}, /* access denied */ {0x2, SPC_SK_ILLEGAL_REQUEST, 0x2c, 0x0}, /* cmd sequence error */ {0x2, SPC_SK_MEDIUM_ERROR, 0x31, 0x3}, /* sanitize failed */ /* 10 */ {0x2, SPC_SK_NOT_READY, 0x4, 0x1b}, /* sanitize in progress */ {0x2, SPC_SK_ILLEGAL_REQUEST, 0x21, 0x0}, /* LBA out of range */ {0x2, SPC_SK_NOT_READY, 0x4, 0x0}, /* not reportable; 0x1: becoming */ {SAM_STAT_RESERVATION_CONFLICT, 0x0, 0x0, 0x0}, {0x2, SPC_SK_NOT_READY, 0x4, 0x4}, /* format in progress */ /* index: 0x10 */ {0x2, SPC_SK_ILLEGAL_REQUEST, 0x31, 0x1}, /* format failed */ {0x2, SPC_SK_NOT_READY, 0x4, 0x9}, /* self-test in progress */ {0x2, SPC_SK_DATA_PROTECT, 0x27, 0x0}, /* write prohibited */ {0x2, SPC_SK_ILLEGAL_REQUEST, 0x10, 0x5}, /* protection info */ {0x2, SPC_SK_MEDIUM_ERROR, 0x3, 0x0}, /* periph dev w fault */ {0x2, SPC_SK_MEDIUM_ERROR, 0x11, 0x0}, /* unrecoc rd */ {0x2, SPC_SK_MEDIUM_ERROR, 0x10, 0x1}, /* PI guard */ {0x2, SPC_SK_MEDIUM_ERROR, 0x10, 0x2}, /* PI app tag */ /* index: 0x18 */ {0x2, SPC_SK_MEDIUM_ERROR, 0x10, 0x3}, /* PI reference tag */ {0x2, SPC_SK_MISCOMPARE, 0x1d, 0x0}, /* during verify */ {0x2, SPC_SK_MEDIUM_ERROR, 0x21, 0x6}, /* read invalid data */ {0x2, SPC_SK_DATA_PROTECT, 0x27, 0x8}, /* zone is read only */ {0x2, SPC_SK_DATA_PROTECT, 0x2c, 0xe}, /* zone is offline */ {0x2, SPC_SK_DATA_PROTECT, 0x2c, 0x12}, /* zone is inactive */ {0x2, SPC_SK_DATA_PROTECT, 0x3f, 0x17}, /* zone is full */ {0x2, SPC_SK_ILLEGAL_REQUEST, 0x21, 0x5}, /* Write boundary violation */ /* index: 0x20 */ {0x2, SPC_SK_DATA_PROTECT, 0x55, 0xe}, /* Insufficient zone resources */ /* Leave this Sentinel value at end of this array */ {0xff, 0xff, 0xff, 0xff}, }; /* These are the error (or warning) exit status values and their associated * strings. They combine utility input syntax errors, SCSI status and sense * key categories, OS errors (e.g. ENODEV for device not found), one that * indicates NVMe non-zero status plus listing those that a Unix OS generates * for any executable (that fails). The convention is 0 means no error and * that in Unix the exit status is an (unsigned) 8 bit value. */ struct sg_value_2names_t sg_exit_str_arr[] = { {0, "No errors", "may also convey true"}, {1, "Syntax error", "command line options (usually)"}, {2, "Device not ready", "type: sense key"}, {3, "Medium or hardware error", "type: sense key (plus blank check for " "tape)"}, {5, "Illegal request", "type: sense key, apart from Invalid opcode"}, {6, "Unit attention", "type: sense key"}, {7, "Data protect", "type: sense key; write protected media?"}, {9, "Illegal request, Invalid opcode", "type: sense key + asc,ascq"}, {10, "Copy aborted", "type: sense key"}, {11, "Aborted command", "type: sense key, other than protection related (asc=0x10)"}, {12, "Device not ready, standby", "type: sense key"}, {13, "Device not ready, unavailable", "type: sense key"}, {14, "Miscompare", "type: sense key"}, {15, "File error", NULL}, {17, "Illegal request with Info field", NULL}, {18, "Medium or hardware error with Info", NULL}, {20, "No sense key", "type: probably additional sense code"}, {21, "Recovered error (warning)", "type: sense key"}, /* N.B. this is a warning not error */ {22, "LBA out of range", NULL}, {24, "Reservation conflict", "type: SCSI status"}, {25, "Condition met", "type: SCSI status"}, /* from PRE-FETCH command */ {26, "Busy", "type: SCSI status"}, /* could be transport issue */ {27, "Task set full", "type: SCSI status"}, {28, "ACA aactive", "type: SCSI status"}, {29, "Task aborted", "type: SCSI status"}, {31, "Contradict", "command line options contradict or select bad mode"}, {32, "Logic error", "unexpected situation, contact author"}, {33, "SCSI command timeout", NULL}, /* OS timed out command */ {34, "Windows error number", "doesn't fit in 7 bits"}, {35, "Transport error", "driver or interconnect error"}, {36, "No errors (false)", NULL}, {40, "Aborted command, protection error", NULL}, {41, "Aborted command, protection error with Info field", NULL}, {47, "flock (Unix system call) error", NULL}, /* ddpt */ {48, "NVMe command with non-zero status", NULL}, {50, "An OS error occurred", "(errno > 46 or negative)"}, /* OS errors (errno in Unix) from 1 to 46 mapped into this range */ {97, "Malformed SCSI command", "trouble building command"}, {98, "Some other sense error", "try '-v' option for more information"}, {99, "Some other error", "possible transport of driver issue"}, {100, "Parameter list length error", NULL}, /* these for ddpt, xcopy */ {101, "Invalid field in parameter", NULL}, {102, "Too many segments in parameters", NULL}, {103, "Target underrun", NULL}, {104, "Target overrun", NULL}, {105, "Operation in progress", NULL}, {106, "Insufficient resources to create ROD", NULL}, {107, "Insufficient resources to create ROD token", NULL}, {108, "Commands cleared by device server", NULL}, {109, "See leave_reason for error", NULL}, /* internal error */ /* DDPT_CAT_TOKOP_BASE: asc=0x23, ascq=110 follow */ {110, "Invalid token operation, cause not reportable", NULL}, {111, "Invalid token operation, unsupported token type", NULL}, {112, "Invalid token operation, remote token usage not supported", NULL}, {113, "Invalid token operation, remote token creation not supported", NULL}, {114, "Invalid token operation, token unknown", NULL}, {115, "Invalid token operation, token corrupt", NULL}, {116, "Invalid token operation, token revoked", NULL}, {117, "Invalid token operation, token expired", NULL}, {118, "Invalid token operation, token cancelled", NULL}, {119, "Invalid token operation, token deleted", NULL}, {120, "Invalid token operation, invalid token length", NULL}, /* The following error codes are generated by a Unix OS */ {126, "Utility found but did not have execute permissions", NULL}, {127, "Utility to be executed was not found", NULL}, {128, "Utility stopped/aborted by signal number: 0", "signal # 0 ??"}, /* 128 + : signal number that aborted the utility. real time signals start at offset SIGRTMIN */ /* OS signals from 1 to 126 mapped into this range (129 to 254) */ {255, "Utility returned 255 or higher", "Windows error number?"}, {0xffff, NULL, NULL}, /* end marking sentinel */ }; #else /* (SG_SCSI_STRINGS && HAVE_NVME && (! IGNORE_NVME)) */ struct sg_lib_simple_value_name_t sg_lib_nvme_admin_cmd_arr[] = { /* Vendor specific 0x80 to 0xff */ {0xffff, NULL}, /* Sentinel */ }; struct sg_lib_simple_value_name_t sg_lib_nvme_nvm_cmd_arr[] = { /* Vendor specific 0x80 to 0xff */ {0xffff, NULL}, /* Sentinel */ }; struct sg_lib_value_name_t sg_lib_nvme_cmd_status_arr[] = { /* Leave this Sentinel value at end of this array */ {0x3ff, 0, NULL}, }; struct sg_lib_4tuple_u8 sg_lib_scsi_status_sense_arr[] = { /* Leave this Sentinel value at end of this array */ {0xff, 0xff, 0xff, 0xff}, }; struct sg_value_2names_t sg_exit_str_arr[] = { {0xffff, NULL, NULL}, /* end marking sentinel */ }; #endif /* (SG_SCSI_STRINGS && HAVE_NVME && (! IGNORE_NVME)) */