# This is the output (in hex) of the SCSI REPORT ZONE DOMAINS command.
# This page is constructed from the command description in zbc2r10
# with two zone domains.

# A typical example:
#    sg_rep_zones --domain --inhex=rep_zdomains.hex

# parameter data header (64 bytes)
00 00 00 c0 00 00 00 c0  02 02 00 30 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00

# first zone domain
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 03  00 00 00 00 00 00 00 00
00 00 00 00 00 13 ff ff  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00

# second zone domain
01 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 03  00 00 00 00 00 04 00 00
00 00 00 00 00 17 ff ff  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00