From 5d21382d1a81a0aa3da2c27235171a8b88357c00 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Fri, 17 Jul 2020 03:50:13 +0000 Subject: testing: remove master-slave terminology for sgv4; remove space from end of source lines for git-svn git-svn-id: https://svn.bingwo.ca/repos/sg3_utils/trunk@856 6180dd3e-e324-4e3e-922d-17de1ae2f315 --- doc/sg_sat_phy_event.8 | 16 ++++++++-------- doc/sg_scan.8.win32 | 16 ++++++++-------- doc/sgp_dd.8 | 4 ++-- 3 files changed, 18 insertions(+), 18 deletions(-) (limited to 'doc') diff --git a/doc/sg_sat_phy_event.8 b/doc/sg_sat_phy_event.8 index 8fcf80d9..8a2f14ae 100644 --- a/doc/sg_sat_phy_event.8 +++ b/doc/sg_sat_phy_event.8 @@ -1,4 +1,4 @@ -.TH SG_SAT_PHY_EVENT "8" "January 2018" "sg3_utils\-1.43" SG3_UTILS +.TH SG_SAT_PHY_EVENT "8" "July 2020" "sg3_utils\-1.46" SG3_UTILS .SH NAME sg_sat_phy_event \- use ATA READ LOG EXT via a SAT pass\-through to fetch SATA phy event counters @@ -17,12 +17,12 @@ command directly to the \fIDEVICE\fR, are sent via a SCSI transport which is assumed to contain a SCSI to ATA Translation (SAT) Layer (SATL). The SATL may be in an operating system driver, in host bus adapter firmware or in some external enclosure. -.PP -The SAT standard (SAT ANSI INCITS 431\-2007, prior draft: sat\-r09.pdf at -www.t10.org) defines two SCSI "ATA PASS\-THROUGH" commands: one using a 16 -byte "cdb" and the other with a 12 byte cdb. This utility defaults to using -the 16 byte cdb variant. SAT\-2 is also a standard: SAT\-2 ANSI INCITS -465\-2010 and the draft prior to that is sat2r09.pdf . The SAT-3 project has +.PP +The SAT standard (SAT ANSI INCITS 431\-2007, prior draft: sat\-r09.pdf at +www.t10.org) defines two SCSI "ATA PASS\-THROUGH" commands: one using a 16 +byte "cdb" and the other with a 12 byte cdb. This utility defaults to using +the 16 byte cdb variant. SAT\-2 is also a standard: SAT\-2 ANSI INCITS +465\-2010 and the draft prior to that is sat2r09.pdf . The SAT-3 project has started and the most recent draft is sat3r01.pdf . .SH OPTIONS Arguments to long options are mandatory for short options as well. @@ -100,7 +100,7 @@ Written by Douglas Gilbert .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT -Copyright \(co 2006\-2018 Douglas Gilbert +Copyright \(co 2006\-2020 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. diff --git a/doc/sg_scan.8.win32 b/doc/sg_scan.8.win32 index 84cc38b0..ee20e6c0 100644 --- a/doc/sg_scan.8.win32 +++ b/doc/sg_scan.8.win32 @@ -21,7 +21,7 @@ problems. .PP There is an optional SCSI adapter scan which may find additional storage devices other than the ones listed above. An example is a SCSI Enclosure -Services (SES) device typically found in disk arrays. +Services (SES) device typically found in disk arrays. .PP Storage and related devices can have several device names in Windows. Probably the most common in the volume name (e.g. "D:"). There is also @@ -125,9 +125,9 @@ recognised by Windows. .PP # sg_scan .br -PD0 [C] FUJITSU MHY2160BH 0000 +PD0 [C] FUJITSU MHY2160BH 0000 .br -PD1 [DF] WD 2500BEV External 1.05 WD\-WXE90 +PD1 [DF] WD 2500BEV External 1.05 WD\-WXE90 .br CDROM0 [E] MATSHITA DVD/CDRW UJDA775 CB03 .PP @@ -136,7 +136,7 @@ and there is a "Sata" bus type. .PP # sg_scan \-b .br -PD0 [C] FUJITSU MHY2160BH 0000 +PD0 [C] FUJITSU MHY2160BH 0000 .br PD1 [DF] WD 2500BEV External 1.05 WD\-WXE90 .br @@ -146,13 +146,13 @@ Now request a SCSI adapter scan as well. .PP # sg_scan \-b \-s .br -PD0 [C] FUJITSU MHY2160BH 0000 +PD0 [C] FUJITSU MHY2160BH 0000 .br -PD1 [DF] WD 2500BEV External 1.05 WD\-WXE90 +PD1 [DF] WD 2500BEV External 1.05 WD\-WXE90 .br -CDROM0 [E] MATSHITA DVD/CDRW UJDA775 CB03 +CDROM0 [E] MATSHITA DVD/CDRW UJDA775 CB03 .br - + .br SCSI0:0,0,0 claimed=1 pdt=0h FUJITSU MHY2160BH 0000 .br diff --git a/doc/sgp_dd.8 b/doc/sgp_dd.8 index 62a065bf..a8899464 100644 --- a/doc/sgp_dd.8 +++ b/doc/sgp_dd.8 @@ -244,8 +244,8 @@ Raw device partition information can often be found with .B fdisk(8) [the "\-ul" argument is useful in this respect]. .PP -Various numeric arguments (e.g. \fISKIP\fR) may include multiplicative -suffixes or be given in hexadecimal. See the "NUMERIC ARGUMENTS" section +Various numeric arguments (e.g. \fISKIP\fR) may include multiplicative +suffixes or be given in hexadecimal. See the "NUMERIC ARGUMENTS" section in the sg3_utils(8) man page. .PP The \fICOUNT\fR, \fISKIP\fR and \fISEEK\fR arguments can take 64 bit -- cgit v1.2.3