diff options
Diffstat (limited to 'suse/sg3_utils.changes')
-rw-r--r-- | suse/sg3_utils.changes | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/suse/sg3_utils.changes b/suse/sg3_utils.changes new file mode 100644 index 00000000..4279a292 --- /dev/null +++ b/suse/sg3_utils.changes @@ -0,0 +1,393 @@ +------------------------------------------------------------------- +Thu Jan 23 15:00:00 EST 2014 - dgilbert@interlog.com + +- import Suse build files into sg3_utils in the suse directory + * change suse spec file to be patch-less + * henceforth see ChangeLog in main directory + +------------------------------------------------------------------- +Thu Jan 23 08:57:56 CET 2014 - hare@suse.de + +- Update to inofficial release 1.38r546 + * sg_ses: error and warning message cleanup + - fix --data=- problem with large buffers + - new --data=@FN to read hex data from file FN + - add --maxlen= option + * sg_inq: + - add LU_CONG to standard inquiry response + - sync version descriptors dated 20131126 + - fix overflow in encode_whitespaces + * sg_vpd: add LU_CONG to standard inquiry response output + - decode Third Party Copy (tpc) page + * sg_persist: add PROUT: Replace Lost Reservation (spc4r36) + * sg_readcap: for --16 show physical block size if + * sg_xcopy: + - environment variables: XCOPY_TO_SRC and + XCOPY_TO_DST indicate where xcopy command is sent + - change default to send xcopy to dst (was src) + - improve CL handling of short options (e.g. '-vv') + * sg_write_same: repeat if unit attention + * sg_rtpg: fix indexing bug with --extended option + * sg_lib_data: sync asc/ascq codes with T10 dated 20131110 + * sg_cmds_extra: fix sa bug in sg_ll_3party_copy_out() +- Update tarball to 1.38b7r537 +- Add sg3_utils-1.38r546.patch + +------------------------------------------------------------------- +Mon Nov 4 01:59:38 UTC 2013 - jengelh@inai.de + +- Update to new upstream release 1.37 +* sg_compare_and_write: add --quiet option to suppress miscompare + report +* sg_persist: fix core dump on -Q option +* sg_unmap: fix core dump on -g option +* sg_ses: add --nickname and --nickid options +- Remove sg3_utils-Fixup-T10-Vendor-designator-display.patch + (merged upstream) + +------------------------------------------------------------------- +Sun Aug 25 18:45:14 CEST 2013 - ohering@suse.de + +- Fixup T10 Vendor designator display (bnc#805059) + sg3_utils-Fixup-T10-Vendor-designator-display.patch +- In rescan-scsi-bus.sh, check if the HBA driver exports issue_lip + in sysfs before using it (bnc#780946) + sg3_utils-check-if-hba-supports-issue-lip.patch + +------------------------------------------------------------------- +Thu Jun 13 14:15:26 UTC 2013 - jengelh@inai.de + +- Implement shlib packaging guidelines; rename sg3_utils-devel + to libsgutils-devel (upstream recommendation) +- More robust make install call; remove redundant %clean section; + simplify file lists + +------------------------------------------------------------------- +Tue Jun 11 08:56:39 UTC 2013 - rmilasan@suse.com + +- Update to version 1.36 + - sg_vpd: Protocol-specific port information VPD page + for SAS SSP, persistent connection (spl3r2), power + disable (spl3r3) + - block device characteristics: add FUAB bit + - sg_xcopy: handle more descriptor types; handle zero + maximum segment length; allow list IDs to be disabled; + improve skip/seek handling; allow xcopy on destination + - sg_reset: and --no-esc option to stop reset escalation + - clean up cli, add long option names + - sg_luns: add --test=ALUN option for decoding LUNs + - decoded luns output in decimal or hex (if -HH given) + - add '--linux' option to show Linux LUN after T10 + representation, can map one to the other + - sg_inq: add --vendor option to show standard inquiry's + vendor specific fields in ASCII + - take resid into account with response output + - sg_sync: add --16 (for 16 byte command) and --timeout= + - sg_logs: add data compression page (ssc4) + - sg_sat_set_features: increase --lba from 1 to 4 bytes + - sg_write_same: add --ndob option (sbc3r35d) + - sg_map: mark as deprecated + - sginfo: mark as deprecated, especially -l (list) + - sg_lib: improve snprintf handling + - sg_lib_data: sync asc/ascq codes with T10 20130117 + - sg_cmds (lib): if noisy given, give more UA info + - make code more C++ friendly + +------------------------------------------------------------------- +Tue Mar 12 09:13:45 CET 2013 - hare@suse.de + +- Update to version 1.35 + - sg_compare_and_write: new utility + - sg_inq+sg_vpd: block device characteristics VPD page: + add product_type, WABEREQ, WACEREQ and VBULS fields + - sg_inq: more --export option changes for udev + - sg_vpd: add more rdac vendor specific vpd pages + - sg_verify: add --ebytchk option for sbc3r34 changes + - sg_stpg: --offline option: fix 'Invalid state 0xe' + - sg_ses: Door Lock element changed to Door element and + abbreviation changed from 'dl' to 'do' (ses3r05) + - archive/rescan-scsi-bus.sh: upgrade to version 1.53hr + - move rescan-scsi-bus.sh to scripts directory + - sync to sbc3r34 + - sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field + - sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17 + - clean up man page summary lines + - sg_xcopy: new dd like utility for extended copy command + - sg_copy_results: new utility for receive copy results + - sg_verify: add 16 byte cdb, bytchk (data-out buffer) + and group number support + - sync to spc4r36 and sbc3r32 + - sg_inq: add --export so sg_inq can replace udev's scsi_id + - decode old EMC Symmetrix abuse of VPD page 0x83 + - sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83 + - sg_ses: increase max dpage response size to 64 KB + - allow ident,locate on enclosure controller + - more sanity for additional element status descriptor + - sg_sanitize: add --ause, --fail and --test= + - sg_luns: add long extended flat space addressing format + - sg_logs: add ATA pass-through results lpage (SAT-2) + - sg_rtpg: add --extended option + - sg_senddiag: list rebuild assist diag page name + - sg_pt_linux: expand DID_ (host_byte) codes + - cope with a transport error plus sense data + - prefer major() over MAJOR() macro + - sg_lib: fix sg_get_command_name() service actions + - report sdat_ovfl bit (if set) in sense data + - decode extended_copy and receive_copy service actions + - decode read_buffer and write_buffer modes + - decode ATA PT fixed format sense (SAT-2) + - sg_cmds_extra: add sg_ll_report_tgt_prt_grp2() + - ./configure options: + - change --enable-no-linux-bsg to --disable-linuxbsg + - add --disable-scsistrings to reduce utility sizes + +------------------------------------------------------------------- +Wed Jul 4 07:01:46 UTC 2012 - cfarrell@suse.com + +- license update: GPL-2.0+ and BSD-3-Clause + Show aggregation and make compatible with Fedora declaration + +------------------------------------------------------------------- +Sun Apr 22 11:50:44 UTC 2012 - puzel@suse.com + +- Update to version 1.33 + - sg_ses: major rework of indexes (again), now two level + - sg_write_buffer: new --specific option for mode specific + field; new mode 13 (spc4r32) + - sg_vpd: add hp3par volume info vendor VPD page + - fix 'scsi ports' [0x88] page problem + - add 'sinq' pseudo page for standard inquiry response + - add power consumption page + - sg_format: add --poll= option for request sense polling + - improve handling of disks > 2 TB and DIF (protection) + - sg_logs: LB provision lpage extra (sbc3r28) + - sg_modes: application tag mpage subcode 0xf0->0x2 + - sg_write_same: no prot fields when wrprotect=0 + - sg_get_lba_status: reflect change in sbc3r25 to Parameter + Data Length response field (offset reduced from 8 to 4) + - sg_inq, sg_vpd: sync with spc4r33 + - win32: change DataBufferOffset type per MSDN; caused + problem with 64 bit machines (with buffered interface) + - sg_luns: tweak documentation for vendor specific reports + - add man pages for scsi_loging_level, scsi_mandat, + scsi_satl and scsi_temperature + +------------------------------------------------------------------- +Mon Jan 16 19:59:42 UTC 2012 - tabraham@novell.com + +- Update to version 1.32 + + sg_sanitize: new utility for command added in sb3r27 + + sg_sat_identify: add '--ident' to output WWN + + sg_ses: major rework of descriptor output + + add --index, --descriptor, --join, --clear, --get, and --set + options + + sg_raw: exit status corrections + + sg_decode_sense: add --nospace and --hex options + + sg_logs: fix bug with large --maxlen + + zero response length when resid implies it is invalid + + add scope field to lb provisioning lpage (sb3r27) + + sg_inq: sync version descriptors with spc4r31 + + sb_lib_data: sync asc/ascq codes with spc4r31 + + sg_vpd: add LBPRZ field in LP provisioning VPD page + + sg_format: allow format of pdt 7 (some MO drives) + + sg_cmd_basic: sg_cmds_process_resp() handle status good + with a sense key other than no_sense (e.g. completed) + + add README.iscsi + +- Updated rescan-scsi-bus.sh to v1.56 + +------------------------------------------------------------------- +Thu Mar 10 08:47:43 UTC 2011 - coolo@novell.com + +- fix file list + +------------------------------------------------------------------- +Fri Feb 18 16:41:32 CET 2011 - hare@suse.de + +- Update to version 1.31: + + sg_decode_sense: new utility to decode sense data + + sg_vpd: LB provisioning + Block limits pages (sbc3r26) + + sync asc/ascq and version descriptors with spc4r28 + + sg_get_config, sg_rmsn, sg_verify: add --readonly option + + sg_lib: implement forwarded sense data descriptor + - decode user data segment referral sense data descriptor + + sg_lib, sg_turs, sg_format: more precision for progress + indication (two places after decimal point) + + sg_lib(win32): add runtime selection of SPT direct or + indirect interface + - sg_read_buffer+sg_write_buffer: set SPT direct + + add examples/forwarded_sense.txt + examples/ref_sense.txt + +- Changes from version 1.30: + + sg_referrals: new utility for REPORT REFERRALS + + sbc3r25 renames 'thin' provisioning' to 'logical block + provisioning': changes in sg_format, sg_inq, sg_logs, + sg_modes, sg_readcap, sg_vpd + + sg_inq: update version descriptor list to spc4r27 + - extended inquiry vpd page add extended self test + completion minutes field + + sg_lib: sync asc/ascq list to spc4r27 + - dStrHex(): trim excess trailing spaces + + sg_read_long: add --readonly option (open() is rw) + + sg_raw: add --readonly option (open() is rw) + - allow bidirectional commands + + sg_vpd: rdac vendor page [0xc8] parse corrections + - extended inquiry vpd page add extended self test + -completion minutes field + + sg_ses: expand --data (in) buffer to 2048 bytes + + sg_opcodes: add extended parameter data for TMFs (spc4r26) + + sg_dd: clean count calculation, document nocache flag + - treat bsg devices as implicit sg_io + + sg_write_same: if READ CAPACITY(16) fails try 10 byte variant + - anticipate approval of proposal to allow UNMAP and ANCHOR + bits to be set on WRITE SAME(10) with '--10' option + + sg3_utils man page: sections added for OS device names + +------------------------------------------------------------------- +Fri Aug 13 11:42:50 CEST 2010 - dimstar@opensuse.org + +- Update to version 1.29: + + sg_rtpg: new logical block dependent state and bit (spc4r23) + + sg_start: add '--readonly' option for ATA disks + + sg_lib: update asc/ascq list to spc4r23 + + sg_inq: update version descriptor list to spc4r23 + + sg_vpd: block device characteristics page: fix form factor + - update Extended Inquiry VPD page to spc4r23 + - update Block Limits VPD page to sbc3r22 + - update Thin Provisioning VPD page to sbc3r22 + - Automation device serial number and Data transfer device + element VPD pages (ssc4r01) + - add Referrals VPD page (sbc3r22) + + sg_logs: add thin provisioning and solid state media log pages + - addition of IBM LTO specific log pages + + sg_modes: new page names from ssc4r01 + + sg_ses: sync with ses3r02 (SAS-2.1 connector types) + + sg_unmap: add '--anchor' option (sbc3r22) + + sg_write_same: add '--anchor' option (sbc3r22) + + sg_pt interface: add set_scsi_pt_flags() to permit passing + through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags + + add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL + + add AM_MAINTAINER_MODE to configure.ac to lessen build issues + + add BSD_LICENSE file to this and lib directories, refer to + it from source and header files. Some source has GPL license +- Changes from version 1.28: + + sg_unmap: new utility for thin provisioning + - add examples/sg_unmap_example.txt + + sg_get_lba_status: new utility for thin provisioning + + sg_read_block_limits: new utility for tape drives + + sg_logs: add cache memory statistics log (sub)page + + sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19) + + sg_vpd: add Thin provisioning VPD page (sbc3r20) and + TapeAlert supported flags VPD page + + sg_inq: note VPD page support better in sg_vpd + + sg_persist: add transport specific transportID format + - allow transportIDs to be read from named file + + sg_opcodes: allow --opcode= option to take OP and SA + values (comma seperated) + - tweak print format, remove test code + + sg_requests: remove test code in progress calculation + + sg_reset: add target reset option + + sg_luns: reduce default maxlen to 8192 (for FreeBSD) + + sg_raw: extend max cdb length from 16 to 256 bytes + - align heap allocs to page boundaries + + sg_lib: sg_set_binary_mode() needs config.h included + - add progress indication sense data descriptor (0xa) + - change SG3_UTILS_* constants to SG_LIB_* + - decode service actions within persistent reserve in/out + - sync with spc4r21 + + sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status() + + sg_pt_linux: fix check condition but empty sense buffer; + - major() macro grief, if present include <linux/kdev_t.h> and + use MAJOR() instead + + scripts/sas_disk_blink: moved from this package to sdparm + + utils/hxascdmp: in Windows set binary mode on read files + + examples/sg_persist_tst.sh: add PRIN read full status command + + sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows + set binary mode on read files + + sg_pt_win32: default to non-direct variant of SPT interface + - use './configure --enable-win32-spt-direct' to override + - non-direct data length set to 16 KB, extended if required + + debian: incorporate patch from debian sid + +------------------------------------------------------------------- +Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de + +- use %_smp_mflags + +------------------------------------------------------------------- +Tue Jul 21 14:00:16 CEST 2009 - hare@suse.de + +- Clean up spec file and remove obsolete cruft + +------------------------------------------------------------------- +Fri Apr 17 20:15:58 CEST 2009 - crrodriguez@suse.de + +- remove static libraries and "la" files + +------------------------------------------------------------------- +Mon Jan 26 15:30:31 CET 2009 - hare@suse.de + +- Fixes to rescan-scsi-bus.sh: + * Implement '--forcerescan' to force a rescan of existing devices + * Handle LUN changes correctly + * Check variables before evaluation + +------------------------------------------------------------------- +Wed Oct 29 11:05:47 CET 2008 - garloff@suse.de + +- rescan-scsi-bus.sh 1.29: + * Fix error in script (returning "" does not work) + * Support systems without /proc/scsi +- Don't install INSTALL + +------------------------------------------------------------------- +Tue Sep 30 14:11:15 CEST 2008 - hare@suse.de + +- Add %insserv_prereq (bnc#423204) + +------------------------------------------------------------------- +Fri Sep 12 20:29:08 CEST 2008 - garloff@suse.de + +- Update rescan-scsi-bus.sh script to 1.28: + * Merge fixes from Hannes + * Minor cleanups + * Sort hosts numerically + +------------------------------------------------------------------- +Tue Aug 12 18:25:43 CEST 2008 - garloff@suse.de + +- Update to sg3_utils-1.27: + * Adapted to linux-2.6.26 (sg_map26) + * sg_dd uses flock (rw -- if that fails ro) + * sg_get_config: OSSC feature (mmc6r02) +- Update to sg3_utils-1.26: + * Minor fixes and enhancements to + sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd, + sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd, + sg_opcodes, sg_turs. + * sg_lib: asc/ascq update for spc4r15, osd2r03 service actions, + sense key specific unit attn queue overflow decoding, ... + * Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t, + sg_io_linux -> lib/. + * Documentation enhancements. + +------------------------------------------------------------------- +Wed Jul 16 09:55:33 CEST 2008 - hare@suse.de + +- Use correct length parameter for sg_inq (bnc#363438) + +------------------------------------------------------------------- +Fri May 23 10:22:31 CEST 2008 - hare@suse.de + +- Use 'Provides' to clean update dependency + +------------------------------------------------------------------- +Fri May 9 17:31:33 CEST 2008 - schwab@suse.de + +- Use autoreconf -i. + +------------------------------------------------------------------- +Thu Apr 24 14:14:14 CEST 2008 - hare@suse.de + +- Split off from original scsi package. + |