diff options
Diffstat (limited to 'include/sg_lib.h')
-rw-r--r-- | include/sg_lib.h | 813 |
1 files changed, 813 insertions, 0 deletions
diff --git a/include/sg_lib.h b/include/sg_lib.h new file mode 100644 index 00000000..41545ee9 --- /dev/null +++ b/include/sg_lib.h @@ -0,0 +1,813 @@ +#ifndef SG_LIB_H +#define SG_LIB_H + +/* + * Copyright (c) 2004-2022 Douglas Gilbert. + * All rights reserved. + * Use of this source code is governed by a BSD-style + * license that can be found in the BSD_LICENSE file. + * + * SPDX-License-Identifier: BSD-2-Clause + */ + +/* + * + * On 5th October 2004 a FreeBSD license was added to this file. + * The intention is to keep this file and the related sg_lib.c file + * as open source and encourage their unencumbered use. + * + * Current version number of this library is in the sg_lib_data.c file and + * can be accessed with the sg_lib_version() function. + */ + + +/* + * This header file contains defines and function declarations that may + * be useful to applications that communicate with devices that use a + * SCSI command set. These command sets have names like SPC-4, SBC-3, + * SSC-3, SES-2 and draft standards defining them can be found at + * https://www.t10.org . Virtually all devices in the Linux SCSI subsystem + * utilize SCSI command sets. Many devices in other Linux device subsystems + * utilize SCSI command sets either natively or via emulation (e.g. a + * SATA disk in a USB enclosure). + */ + +#include <stdio.h> +#include <stdint.h> +#include <stdbool.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* SCSI Peripheral Device Types (PDT) [5 bit field] */ +#define PDT_DISK 0x0 /* direct access block device (disk) */ +#define PDT_TAPE 0x1 /* sequential access device (magnetic tape) */ +#define PDT_PRINTER 0x2 /* printer device (see SSC-1) */ +#define PDT_PROCESSOR 0x3 /* processor device (e.g. SAFTE device) */ +#define PDT_WO 0x4 /* write once device (some optical disks) */ +#define PDT_MMC 0x5 /* CD/DVD/BD (multi-media) */ +#define PDT_SCANNER 0x6 /* obsolete */ +#define PDT_OPTICAL 0x7 /* optical memory device (some optical disks) */ +#define PDT_MCHANGER 0x8 /* media changer device (e.g. tape robot) */ +#define PDT_COMMS 0x9 /* communications device (obsolete) */ +#define PDT_SAC 0xc /* storage array controller device */ +#define PDT_SES 0xd /* SCSI Enclosure Services (SES) device */ +#define PDT_RBC 0xe /* Reduced Block Commands (simplified PDT_DISK) */ +#define PDT_OCRW 0xf /* optical card read/write device */ +#define PDT_BCC 0x10 /* bridge controller commands */ +#define PDT_OSD 0x11 /* Object Storage Device (OSD) */ +#define PDT_ADC 0x12 /* Automation/drive commands (ADC) */ +#define PDT_SMD 0x13 /* Security Manager Device (SMD) */ +#define PDT_ZBC 0x14 /* Zoned Block Commands (ZBC) */ +#define PDT_WLUN 0x1e /* Well known logical unit (WLUN) */ +#define PDT_UNKNOWN 0x1f /* Unknown or no device type */ +#define PDT_MASK 0x1f /* For byte 0 of INQUIRY response */ +#define PDT_MAX 0x1f + +#define GRPNUM_MASK 0x3f + +/* ZBC disks use either PDT_ZBC (if 'host managed') or PDT_DISK . + * So squeeze two PDTs into one integer. Use sg_pdt_s_eq() to compare. + * N.B. Must not use PDT_DISK as upper */ +#define PDT_DISK_ZBC (PDT_DISK | (PDT_ZBC << 8)) +#define PDT_ALL (-1) /* for common to all PDTs */ +#define PDT_LOWER_MASK 0xff +#define PDT_UPPER_MASK (~PDT_LOWER_MASK) + +#ifndef SAM_STAT_GOOD +/* The SCSI status codes as found in SAM-4 at www.t10.org */ +#define SAM_STAT_GOOD 0x0 +#define SAM_STAT_CHECK_CONDITION 0x2 +#define SAM_STAT_CONDITION_MET 0x4 /* this is not an error */ +#define SAM_STAT_BUSY 0x8 +#define SAM_STAT_INTERMEDIATE 0x10 /* obsolete in SAM-4 */ +#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 /* obsolete in SAM-4 */ +#define SAM_STAT_RESERVATION_CONFLICT 0x18 +#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ +#define SAM_STAT_TASK_SET_FULL 0x28 +#define SAM_STAT_ACA_ACTIVE 0x30 +#define SAM_STAT_TASK_ABORTED 0x40 +#endif + +/* The SCSI sense key codes as found in SPC-4 at www.t10.org */ +#define SPC_SK_NO_SENSE 0x0 +#define SPC_SK_RECOVERED_ERROR 0x1 +#define SPC_SK_NOT_READY 0x2 +#define SPC_SK_MEDIUM_ERROR 0x3 +#define SPC_SK_HARDWARE_ERROR 0x4 +#define SPC_SK_ILLEGAL_REQUEST 0x5 +#define SPC_SK_UNIT_ATTENTION 0x6 +#define SPC_SK_DATA_PROTECT 0x7 +#define SPC_SK_BLANK_CHECK 0x8 +#define SPC_SK_VENDOR_SPECIFIC 0x9 +#define SPC_SK_COPY_ABORTED 0xa +#define SPC_SK_ABORTED_COMMAND 0xb +#define SPC_SK_RESERVED 0xc +#define SPC_SK_VOLUME_OVERFLOW 0xd +#define SPC_SK_MISCOMPARE 0xe +#define SPC_SK_COMPLETED 0xf + +/* Transport protocol identifiers or just Protocol identifiers */ +#define TPROTO_FCP 0 +#define TPROTO_SPI 1 +#define TPROTO_SSA 2 +#define TPROTO_1394 3 +#define TPROTO_SRP 4 /* SCSI over RDMA */ +#define TPROTO_ISCSI 5 +#define TPROTO_SAS 6 +#define TPROTO_ADT 7 +#define TPROTO_ATA 8 +#define TPROTO_UAS 9 /* USB attached SCSI */ +#define TPROTO_SOP 0xa /* SCSI over PCIe */ +#define TPROTO_PCIE 0xb /* includes NVMe */ +#define TPROTO_NONE 0xf + +/* SCSI Feature Sets (sfs) */ +#define SCSI_FS_SPC_DISCOVERY_2016 0x1 +#define SCSI_FS_SBC_BASE_2010 0x102 +#define SCSI_FS_SBC_BASE_2016 0x101 +#define SCSI_FS_SBC_BASIC_PROV_2016 0x103 +#define SCSI_FS_SBC_DRIVE_MAINT_2016 0x104 +#define SCSI_FS_ZBC_HOST_AWARE_2020 0x300 +#define SCSI_FS_ZBC_HOST_MANAGED_2020 0x301 +#define SCSI_FS_ZBC_DOMAINS_REALMS_2020 0x302 + +/* Often SCSI responses use the highest integer that can fit in a field + * to indicate "unbounded" or limit does not apply. Sometimes represented + * in output as "-1" for brevity */ +#define SG_LIB_UNBOUNDED_16BIT 0xffff +#define SG_LIB_UNBOUNDED_32BIT 0xffffffffU +#define SG_LIB_UNBOUNDED_64BIT 0xffffffffffffffffULL + +#if (__STDC_VERSION__ >= 199901L) /* C99 or later */ + typedef uintptr_t sg_uintptr_t; +#else + typedef unsigned long sg_uintptr_t; +#endif + +/* Borrowed from Linux kernel; no check that 'arr' actually is one */ +#define SG_ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +/* Doesn't seem to be a common C and C++ technique for clearing an + * aggregrate (e.g. a struct instance) on the stack. Hence this hack: */ +#ifdef __cplusplus +#define SG_C_CPP_ZERO_INIT {} +#else +#define SG_C_CPP_ZERO_INIT ={0} +#endif + + +/* The format of the version string is like this: "2.26 20170906" */ +const char * sg_lib_version(); + +/* Returns length of SCSI command given the opcode (first byte). + * Yields the wrong answer for variable length commands (opcode=0x7f) + * and potentially some vendor specific commands. */ +int sg_get_command_size(uint8_t cdb_byte0); + +/* Command name given pointer to the cdb. Certain command names + * depend on peripheral type (give 0 or -1 if unknown). Places command + * name into buff and will write no more than buff_len bytes. */ +void sg_get_command_name(const uint8_t * cdbp, int peri_type, int buff_len, + char * buff); + +/* Command name given only the first byte (byte 0) of a cdb and + * peripheral type (give 0 or -1 if unknown). */ +void sg_get_opcode_name(uint8_t cdb_byte0, int peri_type, int buff_len, + char * buff); + +/* Command name given opcode (byte 0), service action and peripheral type. + * If no service action give 0, if unknown peripheral type give 0 or -1 . */ +void sg_get_opcode_sa_name(uint8_t cdb_byte0, int service_action, + int peri_type, int buff_len, char * buff); + +/* Fetch NVMe command name given first byte (byte offset 0 in 64 byte + * command) of command. Gets Admin NVMe command name if 'admin' is true + * (e.g. opcode=0x6 -> Identify), otherwise gets NVM command set name + * (e.g. opcode=0 -> Flush). Returns 'buff'. */ +char * sg_get_nvme_opcode_name(uint8_t cmd_byte0, bool admin, int buff_len, + char * buff); + +/* Fetch scsi status string. */ +void sg_get_scsi_status_str(int scsi_status, int buff_len, char * buff); + +/* This is a slightly stretched SCSI sense "descriptor" format header. + * The addition is to allow the 0x70 and 0x71 response codes. The idea + * is to place the salient data of both "fixed" and "descriptor" sense + * format into one structure to ease application processing. + * The original sense buffer should be kept around for those cases + * in which more information is required (e.g. the LBA of a MEDIUM ERROR). */ +struct sg_scsi_sense_hdr { + uint8_t response_code; /* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */ + uint8_t sense_key; + uint8_t asc; + uint8_t ascq; + uint8_t byte4; /* descriptor: SDAT_OVFL; fixed: lower three ... */ + uint8_t byte5; /* ... bytes of INFO field */ + uint8_t byte6; + uint8_t additional_length; /* zero for fixed format sense data */ +}; + +/* The '_is_good()' returns true when status is SAM_STAT_GOOD or + * SAM_STAT_CONDITION_MET, returns false otherwise. Ignores bit 0. The + * '_is_bad() variant is the logical inverse. */ +bool sg_scsi_status_is_good(int sstatus); +bool sg_scsi_status_is_bad(int sstatus); + +/* Maps the salient data from a sense buffer which is in either fixed or + * descriptor format into a structure mimicking a descriptor format + * header (i.e. the first 8 bytes of sense descriptor format). + * If zero response code returns false. Otherwise returns true and if 'sshp' + * is non-NULL then zero all fields and then set the appropriate fields in + * that structure. sshp::additional_length is always 0 for response + * codes 0x70 and 0x71 (fixed format). */ +bool sg_scsi_normalize_sense(const uint8_t * sensep, int sense_len, + struct sg_scsi_sense_hdr * sshp); + +/* Attempt to find the first SCSI sense data descriptor that matches the + * given 'desc_type'. If found return pointer to start of sense data + * descriptor; otherwise (including fixed format sense data) returns NULL. */ +const uint8_t * sg_scsi_sense_desc_find(const uint8_t * sensep, int sense_len, + int desc_type); + +/* Get sense key from sense buffer. If successful returns a sense key value + * between 0 and 15. If sense buffer cannot be decode, returns -1 . */ +int sg_get_sense_key(const uint8_t * sensep, int sense_len); + +/* Yield string associated with sense_key value. Returns 'buff'. */ +char * sg_get_sense_key_str(int sense_key, int buff_len, char * buff); + +/* Yield string associated with ASC/ASCQ values. Returns 'buff'. Prefixes + * any valid additional sense found with "Additional sense: ". */ +char * sg_get_asc_ascq_str(int asc, int ascq, int buff_len, char * buff); + +/* Same as sg_get_asc_ascq_str() when add_sense_leadin is true. When it is + * false this function does _not_ prefix any valid additional sense found + * with "Additional sense: ". */ +char * sg_get_additional_sense_str(int asc, int ascq, bool add_sense_leadin, + int buff_len, char * buff); + +/* Returns true if valid bit set, false if valid bit clear. Irrespective the + * information field is written out via 'info_outp' (except when it is + * NULL). Handles both fixed and descriptor sense formats. */ +bool sg_get_sense_info_fld(const uint8_t * sensep, int sb_len, + uint64_t * info_outp); + +/* Returns true if fixed format or command specific information descriptor + * is found in the descriptor sense; else false. If available the command + * specific information field (4 byte integer in fixed format, 8 byte + * integer in descriptor format) is written out via 'cmd_spec_outp'. + * Handles both fixed and descriptor sense formats. */ +bool sg_get_sense_cmd_spec_fld(const uint8_t * sensep, int sb_len, + uint64_t * cmd_spec_outp); + +/* Returns true if any of the 3 bits (i.e. FILEMARK, EOM or ILI) are set. + * In descriptor format if the stream commands descriptor not found + * then returns false. Writes true or false corresponding to these bits to + * the last three arguments if they are non-NULL. */ +bool sg_get_sense_filemark_eom_ili(const uint8_t * sensep, int sb_len, + bool * filemark_p, bool * eom_p, + bool * ili_p); + +/* Returns true if SKSV is set and sense key is NO_SENSE or NOT_READY. Also + * returns true if progress indication sense data descriptor found. Places + * progress field from sense data where progress_outp points. If progress + * field is not available returns false. Handles both fixed and descriptor + * sense formats. N.B. App should multiply by 100 and divide by 65536 + * to get percentage completion from given value. */ +bool sg_get_sense_progress_fld(const uint8_t * sensep, int sb_len, + int * progress_outp); + +/* Closely related to sg_print_sense(). Puts decoded sense data in 'buff'. + * Usually multiline with multiple '\n' including one trailing. If + * 'raw_sinfo' set appends sense buffer in hex. 'leadin' is string prepended + * to each line written to 'buff', NULL treated as "". Returns the number of + * bytes written to 'buff' excluding the trailing '\0'. + * N.B. prior to sg3_utils v 1.42 'leadin' was only prepended to the first + * line output. Also this function returned type void. */ +int sg_get_sense_str(const char * leadin, const uint8_t * sense_buffer, + int sb_len, bool raw_sinfo, int buff_len, char * buff); + +/* Decode descriptor format sense descriptors (assumes sense buffer is + * in descriptor format). 'leadin' is string prepended to each line written + * to 'b', NULL treated as "". Returns the number of bytes written to 'b' + * excluding the trailing '\0'. If problem, returns 0. */ +int sg_get_sense_descriptors_str(const char * leadin, + const uint8_t * sense_buffer, + int sb_len, int blen, char * b); + +/* Decodes a designation descriptor (e.g. as found in the Device + * Identification VPD page (0x83)) into string 'b' whose maximum length is + * blen. 'leadin' is string prepended to each line written to 'b', NULL + * treated as "". Returns the number of bytes written to 'b' excluding the + * trailing '\0'. */ +int sg_get_designation_descriptor_str(const char * leadin, + const uint8_t * ddp, int dd_len, + bool print_assoc, bool do_long, + int blen, char * b); + +/* Expects a T10 UUID designator (as found in the Device Identification VPD + * page) pointed to by 'dp'. To not produce an error string in 'b', c_set + * should be 1 (binary) and dlen should be 18. Currently T10 only supports + * locally assigned UUIDs. Writes output to string 'b' of no more than blen + * bytes and returns the number of bytes actually written to 'b' but doesn't + * count the trailing null character it always appends (if blen > 0). 'lip' + * is lead-in string (on each line) than may be NULL. skip_prefix avoids + * outputting: ' Locally assigned UUID: ' before the UUID. */ +int sg_t10_uuid_desig2str(const uint8_t * dp, int dlen, int c_set, + bool do_long, bool skip_prefix, + const char * lip, int blen, char * b); + +/* Yield string associated with peripheral device type (pdt). Returns + * 'buff'. If 'pdt' out of range yields "bad pdt" string. */ +char * sg_get_pdt_str(int pdt, int buff_len, char * buff); + +/* Some lesser used PDTs share a lot in common with a more used PDT. + * Examples are PDT_ADC decaying to PDT_TAPE and PDT_ZBC to PDT_DISK. + * If such a lesser used 'dev_pdt' is given to this function, then it will + * return the more used PDT (i.e. "decays to"); otherwise 'dev_pdt' is + * returned. Valid for 'pdt' 0 to 31, for other values returns 0. */ +int sg_lib_pdt_decay(int dev_pdt); + +/* Yield string associated with transport protocol identifier (tpi). Returns + * 'buff'. If 'tpi' out of range yields "bad tpi" string. */ +char * sg_get_trans_proto_str(int tpi, int buff_len, char * buff); + +/* Decode TransportID pointed to by 'bp' of length 'bplen'. Place decoded + * string output in 'buff' which is also the return value. Each new line + * is prefixed by 'leadin'. If leadin NULL treat as "". */ +char * sg_decode_transportid_str(const char * leadin, uint8_t * bp, int bplen, + bool only_one, int buff_len, char * buff); + +/* Returns a designator's type string given 'val' (0 to 15 inclusive), + * otherwise returns NULL. */ +const char * sg_get_desig_type_str(int val); + +/* Returns a designator's code_set string given 'val' (0 to 15 inclusive), + * otherwise returns NULL. */ +const char * sg_get_desig_code_set_str(int val); + +/* Returns a designator's association string given 'val' (0 to 3 inclusive), + * otherwise returns NULL. */ +const char * sg_get_desig_assoc_str(int val); + +/* Yield string associated with zone type (see ZBC and ZBC-2) [e.g. REPORT + * ZONES command response]. Returns 'buff' unless buff_len < 1 in which + * NULL is returned. */ +char * sg_get_zone_type_str(uint8_t zt, int buff_len, char * buff); + +/* Yield SCSI Feature Set (sfs) string. When 'peri_type' is < -1 (or > 31) + * returns pointer to string (same as 'buff') associated with 'sfs_code'. + * When 'peri_type' is between -1 (for SPC) and 31 (inclusive) then a match + * on both 'sfs_code' and 'peri_type' is required. If 'foundp' is not NULL + * then where it points is set to true if a match is found else it is set to + * false. If 'buff' is not NULL then in the case of a match a descriptive + * string is written to 'buff' while if there is not a not then a string + * ending in "Reserved" is written (and may be prefixed with SPC, SBC, SSC + * or ZBC). Returns 'buff' (i.e. a pointer value) even if it is NULL. + * Example: + * char b[64]; + * ... + * printf("%s\n", sg_get_sfs_str(sfs_code, -2, sizeof(b), b, NULL, 0)); + */ +const char * sg_get_sfs_str(uint16_t sfs_code, int peri_type, int buff_len, + char * buff, bool * foundp, int verbose); + +/* This is a heuristic that takes into account the command bytes and length + * to decide whether the presented unstructured sequence of bytes could be + * a SCSI command. If so it returns true otherwise false. Vendor specific + * SCSI commands (i.e. opcodes from 0xc0 to 0xff), if presented, are assumed + * to follow SCSI conventions (i.e. length of 6, 10, 12 or 16 bytes). The + * only SCSI commands considered above 16 bytes of length are the Variable + * Length Commands (opcode 0x7f) and the XCDB wrapped commands (opcode 0x7e). + * Both have an inbuilt length field which can be cross checked with clen. + * No NVMe commands (64 bytes long plus some extra added by some OSes) have + * opcodes 0x7e or 0x7f yet. ATA is register based but SATA has FIS + * structures that are sent across the wire. The 'FIS register' structure is + * used to move a command from a SATA host to device, but the ATA 'command' + * is not the first byte. So it is harder to say what will happen if a + * FIS structure is presented as a SCSI command, hopefully there is a low + * probability this function will yield true in that case. */ +bool sg_is_scsi_cdb(const uint8_t * cdbp, int clen); + +/* Yield string associated with NVMe command status value in sct_sc. It + * expects to decode DW3 bits 27:17 from the completion queue. Bits 27:25 + * are the Status Code Type (SCT) and bits 24:17 are the Status Code (SC). + * Bit 17 in DW3 should be bit 0 in sct_sc. If no status string is found + * a string of the form "Reserved [0x<sct_sc_in_hex>]" is generated. + * Returns 'buff'. Does nothing if buff_len<=0 or if buff is NULL.*/ +char * sg_get_nvme_cmd_status_str(uint16_t sct_sc, int buff_len, char * buff); + +/* Attempts to map NVMe status value ((SCT << 8) | SC) n sct_sc to a SCSI + * status, sense_key, asc and ascq tuple. If successful returns true and + * writes to non-NULL pointer arguments; otherwise returns false. */ +bool sg_nvme_status2scsi(uint16_t sct_sc, uint8_t * status_p, uint8_t * sk_p, + uint8_t * asc_p, uint8_t * ascq_p); + +/* Add vendor (sg3_utils) specific sense descriptor for the NVMe Status + * field. Assumes descriptor (i.e. not fixed) sense. Assume sbp has room. */ +void sg_nvme_desc2sense(uint8_t * sbp, bool dnr, bool more, uint16_t sct_sc); + +/* Build minimum sense buffer, either descriptor type (desc=true) or fixed + * type (desc=false). Assume sbp has enough room (8 or 14 bytes + * respectively). sbp should have room for 32 or 18 bytes respectively */ +void sg_build_sense_buffer(bool desc, uint8_t *sbp, uint8_t skey, + uint8_t asc, uint8_t ascq); + +/* Returns true if left argument is "equal" to the right argument. l_pdt_s + * is a compound PDT (SCSI Peripheral Device Type) or a negative number + * which represents a wildcard (i.e. match anything). r_pdt_s has a similar + * form. PDT values are 5 bits long (0 to 31) and a compound pdt_s is + * formed by shifting the second (upper) PDT by eight bits to the left and + * OR-ing it with the first PDT. The pdt_s values must be defined so + * PDT_DISK (0) is _not_ the upper value in a compound pdt_s. */ +bool sg_pdt_s_eq(int l_pdt_s, int r_pdt_s); + +extern FILE * sg_warnings_strm; + +void sg_set_warnings_strm(FILE * warnings_strm); + +/* Given a SCSI command pointed to by cdbp of sz bytes this function forms a + * SCSI command in ASCII hex surrounded by square brackets in 'b'. 'b' is at + * least blen bytes long. If cmd_name is true then the command is prefixed + * by its SCSI command name (e.g. "VERIFY(10) [2f ...]". The command is + * shown as spaced separated pairs of hexadecimal digits (i.e. 0-9, a-f). + * Each pair represents byte. The leftmost pair of digits is cdbp[0] . If + * sz <= 0 then this function tries to guess the length of the command. */ +char * +sg_get_command_str(const uint8_t * cdbp, int sz, bool cmd_name, int blen, + char * b); + +/* The following "print" functions send ASCII to 'sg_warnings_strm' file + * descriptor (default value is stderr). 'leadin' is string prepended to + * each line printed out, NULL treated as "". */ +void sg_print_command_len(const uint8_t * command, int len); +void sg_print_command(const uint8_t * command); +void sg_print_scsi_status(int scsi_status); + +/* DSENSE is 'descriptor sense' as opposed to the older 'fixed sense'. Reads + * environment variable SG3_UTILS_DSENSE. Only (currently) used in SNTL. */ +bool sg_get_initial_dsense(void); + +/* 'leadin' is string prepended to each line printed out, NULL treated as + * "". N.B. prior to sg3_utils v 1.42 'leadin' was only prepended to the + * first line printed. */ +void sg_print_sense(const char * leadin, const uint8_t * sense_buffer, + int sb_len, bool raw_info); + +/* This examines exit_status and if an error message is known it is output + * to stdout/stderr and true is returned. If no error message is + * available nothing is output and false is returned. If exit_status is + * zero (no error) nothing is output and true is returned. If exit_status + * is negative then nothing is output and false is returned. If leadin is + * non-NULL then it is printed before the error message. All messages are + * a single line with a trailing LF. */ +bool sg_if_can2stdout(const char * leadin, int exit_status); +bool sg_if_can2stderr(const char * leadin, int exit_status); + +/* This examines exit_status and if an error message is known it is output + * as a string to 'b' and true is returned. If 'longer' is true and extra + * information is available then it is added to the output. If no error + * message is available a null character is output and false is returned. + * If exit_status is zero (no error) and 'longer' is true then the string + * 'No errors' is output; if 'longer' is false then a null character is + * output; in both cases true is returned. If exit_status is negative then + * a null character is output and false is returned. All messages are a + * single line (less than 80 characters) with no trailing LF. The output + * string including the trailing null character is no longer than b_len. */ +bool sg_exit2str(int exit_status, bool longer, int b_len, char * b); + +/* Utilities can use these exit status values for syntax errors and + * file (device node) problems (e.g. not found or permissions). */ +#define SG_LIB_SYNTAX_ERROR 1 /* command line syntax problem */ + +/* The sg_err_category_sense() function returns one of the following. + * These may be used as exit status values (from a process). Notice that + * some of the lower values correspond to SCSI sense key values. */ +#define SG_LIB_CAT_CLEAN 0 /* No errors or other information */ +#define SG_LIB_OK_TRUE SG_LIB_CAT_CLEAN /* No error, reporting true */ +/* Value 1 left unused for utilities to use SG_LIB_SYNTAX_ERROR */ +#define SG_LIB_CAT_NOT_READY 2 /* sense key: not ready, see 12 and 13 + * [sk,asc,ascq: 0x2,<most>,<most>] */ +#define SG_LIB_CAT_MEDIUM_HARD 3 /* medium or hardware error, blank check + * [sk,asc,ascq: 0x3/0x4/0x8,*,*] */ +#define SG_LIB_CAT_ILLEGAL_REQ 5 /* Illegal request (other than invalid + * opcode): [sk,asc,ascq: 0x5,*,*] */ +#define SG_LIB_CAT_UNIT_ATTENTION 6 /* sense key, device state changed + * [sk,asc,ascq: 0x6,*,*] */ + /* was SG_LIB_CAT_MEDIA_CHANGED earlier [sk,asc,ascq: 0x6,0x28,*] */ +#define SG_LIB_CAT_DATA_PROTECT 7 /* sense key, media write protected? + * [sk,asc,ascq: 0x7,*,*] */ +#define SG_LIB_CAT_INVALID_OP 9 /* (Illegal request,) Invalid opcode: + * [sk,asc,ascq: 0x5,0x20,0x0] */ +#define SG_LIB_CAT_COPY_ABORTED 10 /* sense key, some data transferred + * [sk,asc,ascq: 0xa,*,*] */ +#define SG_LIB_CAT_ABORTED_COMMAND 11 /* interpreted from sense buffer + * [sk,asc,ascq: 0xb,! 0x10,*] */ +#define SG_LIB_CAT_STANDBY 12 /* sense key: not ready, special case + * [sk,asc, ascq: 0x2, 0x4, 0xb] */ +#define SG_LIB_CAT_UNAVAILABLE 13 /* sense key: not ready, special case + * [sk,asc, ascq: 0x2, 0x4, 0xc] */ +#define SG_LIB_CAT_MISCOMPARE 14 /* sense key, probably verify + * [sk,asc,ascq: 0xe,*,*] */ +#define SG_LIB_FILE_ERROR 15 /* device or other file problem */ +/* for 17 and 18, see below */ +#define SG_LIB_CAT_NO_SENSE 20 /* sense data with key of "no sense" + * [sk,asc,ascq: 0x0,*,*] */ +#define SG_LIB_CAT_RECOVERED 21 /* Successful command after recovered err + * [sk,asc,ascq: 0x1,*,*] */ +#define SG_LIB_LBA_OUT_OF_RANGE 22 /* Illegal request, LBA Out Of Range + * [sk,asc,ascq: 0x5,0x21,0x0] */ +#define SG_LIB_CAT_RES_CONFLICT SAM_STAT_RESERVATION_CONFLICT + /* 24: this is a SCSI status, not sense. + * It indicates reservation by another + * machine blocks this command */ +#define SG_LIB_CAT_CONDITION_MET 25 /* SCSI status, not sense key. + * Only from PRE-FETCH (SBC-4) */ +#define SG_LIB_CAT_BUSY 26 /* SCSI status, not sense. Invites retry */ +#define SG_LIB_CAT_TS_FULL 27 /* SCSI status, not sense. Wait then retry */ +#define SG_LIB_CAT_ACA_ACTIVE 28 /* SCSI status; ACA seldom used */ +#define SG_LIB_CAT_TASK_ABORTED 29 /* SCSI status, this command aborted by? */ +#define SG_LIB_CONTRADICT 31 /* error involving two or more cl options */ +#define SG_LIB_LOGIC_ERROR 32 /* unexpected situation in code */ +/* for 33 see SG_LIB_CAT_TIMEOUT below */ +#define SG_LIB_WINDOWS_ERR 34 /* Windows error number don't fit in 7 bits so + * map to a single value for exit statuses */ +#define SG_LIB_TRANSPORT_ERROR 35 /* driver or interconnect */ +#define SG_LIB_OK_FALSE 36 /* no error, reporting false (cf. no error, + * reporting true is SG_LIB_OK_TRUE(0) ) */ +#define SG_LIB_CAT_PROTECTION 40 /* subset of aborted command (for PI, DIF) + * [sk,asc,ascq: 0xb,0x10,*] */ +/* 47: flock error used in ddpt utility */ +#define SG_LIB_NVME_STATUS 48 /* NVMe Status Field (SF) other than 0 */ +#define SG_LIB_WILD_RESID 49 /* Residual value for data-in transfer of a + * SCSI command is nonsensical */ +#define SG_LIB_OS_BASE_ERR 50 /* in Linux: values found in: + * include/uapi/asm-generic/errno-base.h + * Example: ENOMEM reported as 62 (=50+12) + * if errno > 46 then use this value */ +/* 51-->96 set aside for Unix errno values shifted by SG_LIB_OS_BASE_ERR */ +#define SG_LIB_CAT_MALFORMED 97 /* Response to SCSI command malformed */ +#define SG_LIB_CAT_SENSE 98 /* Something else is in the sense buffer */ +#define SG_LIB_CAT_OTHER 99 /* Some other error/warning has occurred + * (e.g. a transport or driver error) */ +/* 100 to 120 (inclusive) used by ddpt utility */ +#define SG_LIB_UNUSED_ABOVE 120 /* Put extra errors in holes below this */ + +/* Returns a SG_LIB_CAT_* value. If cannot decode sense_buffer or a less + * common sense key then return SG_LIB_CAT_SENSE .*/ +int sg_err_category_sense(const uint8_t * sense_buffer, int sb_len); + +/* Here are some additional sense data categories that are not returned + * by sg_err_category_sense() but are returned by some related functions. */ +#define SG_LIB_CAT_ILLEGAL_REQ_WITH_INFO 17 /* Illegal request (other than */ + /* invalid opcode) plus 'info' field: */ + /* [sk,asc,ascq: 0x5,*,*] */ +#define SG_LIB_CAT_MEDIUM_HARD_WITH_INFO 18 /* medium or hardware error */ + /* sense key plus 'info' field: */ + /* [sk,asc,ascq: 0x3/0x4,*,*] */ +#define SG_LIB_CAT_TIMEOUT 33 /* SCSI command timeout */ +#define SG_LIB_CAT_PROTECTION_WITH_INFO 41 /* aborted command sense key, */ + /* protection plus 'info' field: */ + /* [sk,asc,ascq: 0xb,0x10,*] */ + +/* Yield string associated with sense category. Returns 'buff' (or pointer + * to "Bad sense category" if 'buff' is NULL). If sense_cat unknown then + * yield "Sense category: <sense_cat)val>" string. The original 'sense + * category' concept has been expanded to most detected errors and is + * returned by these utilities as their exit status value (an (unsigned) + * 8 bit value where 0 means good (i.e. no errors)). Uses the + * sg_exit2str() function. */ +const char * sg_get_category_sense_str(int sense_cat, int buff_len, + char * buff, int verbose); + + +/* Iterates to next designation descriptor in the device identification + * VPD page. The 'initial_desig_desc' should point to start of first + * descriptor with 'page_len' being the number of valid bytes in that + * and following descriptors. To start, 'off' should point to a negative + * value, thereafter it should point to the value yielded by the previous + * call. If 0 returned then 'initial_desig_desc + *off' should be a valid + * descriptor; returns -1 if normal end condition and -2 for an abnormal + * termination. Matches association, designator_type and/or code_set when + * any of those values are greater than or equal to zero. */ +int sg_vpd_dev_id_iter(const uint8_t * initial_desig_desc, int page_len, + int * off, int m_assoc, int m_desig_type, + int m_code_set); + + +/* <<< General purpose (i.e. not SCSI specific) utility functions >>> */ + +/* Always returns valid string even if errnum is wild (or library problem). + * If errnum is negative, flip its sign. */ +char * safe_strerror(int errnum); + +/* Not all platforms support the Unix sleep(seconds) function. */ +void sg_sleep_secs(int num_secs); + +/* There are several SCSI commands that are very destructive for the user + * data stored on a device. The FORMAT UNIT command is the prime example + * but there are an increasing number of newer SCSI commands that remove or + * destroy some or all of the user's data. This function takes 15 seconds, + * divided into three parts, saying that 'cmd_name' will be executed on + * 'dev_name' and then waits for 5 seconds inviting the user to press + * control-C to abort the operation. After three such prompts the function + * returns and the utility start to execute the "dangerous" SCSI command, + * Utilities that use this function usually have a --quick option to bypass + * this call. That may be appropriate if the utility in question is called + * from a script or in background processing. If 'stress_all' is true then + * state "ALL data" will be lost, if false drop the "ALL". */ +void +sg_warn_and_wait(const char * cmd_name, const char * dev_name, + bool stress_all); + + +/* Print (to stdout) 'str' of bytes in hex, 16 bytes per line optionally + * followed at the right hand side of the line with an ASCII interpretation. + * Each line is prefixed with an address, starting at 0 for str[0]..str[15]. + * All output numbers are in hex. + * 'no_ascii' selects on of 3 output format types: + * > 0 each line has address then up to 16 ASCII-hex bytes + * = 0 in addition, the bytes are listed in ASCII to the right + * < 0 only the ASCII-hex bytes are listed (i.e. without address) +*/ +void dStrHex(const char * str, int len, int no_ascii); + +/* Print (to sg_warnings_strm (stderr)) 'str' of bytes in hex, 16 bytes per + * line optionally followed at right by its ASCII interpretation. Same + * logic as dStrHex() with different output stream (i.e. stderr). */ +void dStrHexErr(const char * str, int len, int no_ascii); + +/* Read binary starting at 'str' for 'len' bytes and output as ASCII + * hexadecimal into file pointer (fp). 16 bytes per line are output with an + * additional space between 8th and 9th byte on each line (for readability). + * 'no_ascii' selects one of 3 output format types as shown in dStrHex() . */ +void dStrHexFp(const char* str, int len, int no_ascii, FILE * fp); + +/* Read 'len' bytes from 'str' and output as ASCII-Hex bytes (space separated) + * to 'b' not to exceed 'b_len' characters. Each line starts with 'leadin' + * (NULL for no leadin) and there are 16 bytes per line with an extra space + * between the 8th and 9th bytes. 'oformat' is 0 for repeat in printable ASCII + * ('.' for non printable chars) to right of each line; 1 don't (so just + * output ASCII hex). If 'oformat' is 2 output same as 1 but any LFs are + * replaced by space (and trailing spaces are trimmed). Note that an address + * is _not_ printed on each line preceding the hex data. Returns number of + * bytes written to 'b' excluding the trailing '\0'. The only difference + * between dStrHexStr() and hex2str() is the type of the first argument. */ +int dStrHexStr(const char * str, int len, const char * leadin, int oformat, + int cb_len, char * cbp); +int hex2str(const uint8_t * b_str, int len, const char * leadin, int oformat, + int cb_len, char * cbp); + +/* Similar to hex2str() but outputs to file pointed to be fp */ +void hex2fp(const uint8_t * b_str, int len, const char * leadin, int oformat, + FILE * fp); + +/* The following 2 functions are equivalent to dStrHex() and dStrHexErr() + * respectively. The difference is only the type of the first of argument: + * uint8_t instead of char. The name of the argument is changed to b_str to + * stress it is a pointer to the start of a binary string. */ +void hex2stdout(const uint8_t * b_str, int len, int no_ascii); +void hex2stderr(const uint8_t * b_str, int len, int no_ascii); + +/* Read ASCII hex bytes or binary from fname (a file named '-' taken as + * stdin). If reading ASCII hex then there should be either one entry per + * line or a comma, space, hyphen or tab separated list of bytes. If no_space + * is set then a string of ACSII hex digits is expected, 2 per byte. + * Everything from and including a '#' on a line is ignored. Returns 0 if ok, + * or an error code. If the error code is SG_LIB_LBA_OUT_OF_RANGE then mp_arr + * would be exceeded and both mp_arr and mp_arr_len are written to. + * The max_arr_len_and argument may carry extra information: when it is + * negative its absolute value is used for the maximum number of bytes to + * write to mp_arr _and_ the first hexadecimal value on each line is skipped. + * Many hexadecimal output programs place a running address (index) as the + * first field on each line. When as_binary and/or no_space are true, the + * absolute value of max_arr_len_and is used. */ +int sg_f2hex_arr(const char * fname, bool as_binary, bool no_space, + uint8_t * mp_arr, int * mp_arr_len, int max_arr_len_and); + +/* Returns true when executed on big endian machine; else returns false. + * Useful for displaying ATA identify words (which need swapping on a + * big endian machine). */ +bool sg_is_big_endian(); + +/* Returns true if byte sequence starting at bp with a length of b_len is + * all zeros (for sg_all_zeros()) or all 0xff_s (for sg_all_ffs()); + * otherwise returns false. If bp is NULL or b_len <= 0 returns false. */ +bool sg_all_zeros(const uint8_t * bp, int b_len); +bool sg_all_ffs(const uint8_t * bp, int b_len); + +/* Extract character sequence from ATA words as in the model string + * in a IDENTIFY DEVICE response. Returns number of characters + * written to 'ochars' before 0 character is found or 'num' words + * are processed. */ +int sg_ata_get_chars(const uint16_t * word_arr, int start_word, + int num_words, bool is_big_endian, char * ochars); + +/* Print (to stdout) 16 bit 'words' in hex, 8 words per line optionally + * followed at the right hand side of the line with an ASCII interpretation + * (pairs of ASCII characters in big endian order (upper first)). + * Each line is prefixed with an address, starting at 0. + * All output numbers are in hex. 'no_ascii' allows for 3 output types: + * > 0 each line has address then up to 8 ASCII-hex words + * = 0 in addition, the words are listed in ASCII pairs to the right + * = -1 only the ASCII-hex words are listed (i.e. without address) + * = -2 only the ASCII-hex words, formatted for "hdparm --Istdin" + * < -2 same as -1 + * If 'swapb' is true then bytes in each word swapped. Needs to be set + * for ATA IDENTIFY DEVICE response on big-endian machines. +*/ +void dWordHex(const uint16_t * words, int num, int no_ascii, bool swapb); + +/* If the number in 'buf' can not be decoded or the multiplier is unknown + * then -1 is returned. Accepts a hex prefix (0x or 0X) or a decimal + * multiplier suffix (as per GNU's dd (since 2002: SI and IEC 60027-2)). + * Main (SI) multipliers supported: K, M, G. Ignore leading spaces and + * tabs; accept comma, hyphen, space, tab and hash as terminator. + * Handles zero and positive values up to 2**31-1 . + * Experimental: left argument (must in with hexadecimal digit) added + * to, or multiplied, by right argument. No embedded spaces. + * Examples: '3+1k' (evaluates to 1027) and '0xf+0x3'. */ +int sg_get_num(const char * buf); + +/* If the number in 'buf' can not be decoded then -1 is returned. Accepts a + * hex prefix (0x or 0X) or a 'h' (or 'H') suffix; otherwise decimal is + * assumed. Does not accept multipliers. Accept a comma (","), hyphen ("-"), + * a whitespace or newline as terminator. Only decimal numbers can represent + * negative numbers and '-1' must be treated separately. */ +int sg_get_num_nomult(const char * buf); + +/* If the number in 'buf' can not be decoded or the multiplier is unknown + * then -1LL is returned. Accepts a hex prefix (0x or 0X), hex suffix + * (h or H), or a decimal multiplier suffix (as per GNU's dd (since 2002: + * SI and IEC 60027-2)). Main (SI) multipliers supported: K, M, G, T, P + * and E. Ignore leading spaces and tabs; accept comma, hyphen, space, tab + * and hash as terminator. Handles zero and positive values up to 2**63-1 . + * Experimental: the left argument (must end in with hexadecimal digit) + * added to, or multiplied by, the right argument. No embedded spaces. + * Examples: '3+1k' (evaluates to 1027) and '0xf+0x3'. */ +int64_t sg_get_llnum(const char * buf); + +/* If the number in 'buf' can not be decoded then -1 is returned. Accepts a + * hex prefix (0x or 0X) or a 'h' (or 'H') suffix; otherwise decimal is + * assumed. Does not accept multipliers. Accept a comma (","), hyphen ("-"), + * a whitespace or newline as terminator. Only decimal numbers can represent + * negative numbers and '-1' must be treated separately. */ +int64_t sg_get_llnum_nomult(const char * buf); + +/* Returns pointer to heap (or NULL) that is aligned to a align_to byte + * boundary. Sends back *buff_to_free pointer in third argument that may be + * different from the return value. If it is different then the *buff_to_free + * pointer should be freed (rather than the returned value) when the heap is + * no longer needed. If align_to is 0 then aligns to OS's page size. Sets all + * returned heap to zeros. If num_bytes is 0 then set to page size. */ +uint8_t * sg_memalign(uint32_t num_bytes, uint32_t align_to, + uint8_t ** buff_to_free, bool vb); + +/* Returns OS page size in bytes. If uncertain returns 4096. */ +uint32_t sg_get_page_size(void); + +/* If byte_count is 0 or less then the OS page size is used as denominator. + * Returns true if the remainder of ((unsigned)pointer % byte_count) is 0, + * else returns false. */ +bool sg_is_aligned(const void * pointer, int byte_count); + +/* Does similar job to sg_get_unaligned_be*() but this function starts at + * a given start_bit (i.e. within byte, so 7 is MSbit of byte and 0 is LSbit) + * offset. Maximum number of num_bits is 64. For example, these two + * invocations are equivalent (and should yield the same result); + * sg_get_big_endian(from_bp, 7, 16) + * sg_get_unaligned_be16(from_bp) */ +uint64_t sg_get_big_endian(const uint8_t * from_bp, + int start_bit /* 0 to 7 */, + int num_bits /* 1 to 64 */); + +/* Does similar job to sg_put_unaligned_be*() but this function starts at + * a given start_bit offset. Maximum number of num_bits is 64. Preserves + * residual bits in partially written bytes. start_bit 7 is MSb. */ +void sg_set_big_endian(uint64_t val, uint8_t * to, int start_bit /* 0 to 7 */, + int num_bits /* 1 to 64 */); + +/* If os_err_num is within bounds then the returned value is 'os_err_num + + * SG_LIB_OS_BASE_ERR' otherwise SG_LIB_OS_BASE_ERR is returned. If + * os_err_num is 0 then 0 is returned. */ +int sg_convert_errno(int os_err_num); + + +/* <<< Architectural support functions [is there a better place?] >>> */ + +/* Non Unix OSes distinguish between text and binary files. + * Set text mode on fd. Does nothing in Unix. Returns negative number on + * failure. */ +int sg_set_text_mode(int fd); + +/* Set binary mode on fd. Does nothing in Unix. Returns negative number on + * failure. */ +int sg_set_binary_mode(int fd); + +#ifdef __cplusplus +} +#endif + +#endif /* SG_LIB_H */ |