diff options
Diffstat (limited to 'doc/sg_vpd.8')
-rw-r--r-- | doc/sg_vpd.8 | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/doc/sg_vpd.8 b/doc/sg_vpd.8 new file mode 100644 index 00000000..8bb88eef --- /dev/null +++ b/doc/sg_vpd.8 @@ -0,0 +1,365 @@ +.TH SG_VPD "8" "August 2022" "sg3_utils\-1.48" SG3_UTILS +.SH NAME +sg_vpd \- fetch SCSI VPD page and/or decode its response +.SH SYNOPSIS +.B sg_vpd +[\fI\-\-all\fR] [\fI\-\-enumerate\fR] [\fI\-\-examine\fR] [\fI\-\-force\fR] +[\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-ident\fR] [\fI\-\-inhex=FN\fR] +[\fI\-\-json[=JO]\fR] [\fI\-\-long\fR] [\fI\-\-maxlen=LEN\fR] +[\fI\-\-page=PG\fR] [\fI\-\-quiet\fR] [\fI\-\-raw\fR] +[\fI\-\-sinq_inraw=RFN\fR] [\fI\-\-vendor=VP\fR] [\fI\-\-verbose\fR] +[\fI\-\-version\fR] [\fIDEVICE\fR] +.SH DESCRIPTION +.\" Add any additional description here +.PP +This utility, when \fIDEVICE\fR is given, fetches a Vital Product Data (VPD) +page and decodes it or outputs it in ASCII hexadecimal or binary. VPD pages +are fetched with a SCSI INQUIRY command. +.PP +Alternatively the \fI\-\-inhex=FN\fR option can be given. In this case +\fIFN\fR is assumed to be a file name ('\-' for stdin) containing ASCII +hexadecimal representing a VPD page response. If the \fI\-\-raw\fR option +is also given then binary input is assumed (rather than ASCII hexadecimal). +.PP +Probably the most important page is the Device Identification +VPD page (page number: 0x83). Since SPC\-3, support for this page +has been flagged as mandatory. This page can be fetched by +using the \fI\-\-ident\fR option. +.PP +The reference document used for interpreting VPD pages (and the INQUIRY +standard response) is T10/BSR INCITS 566 Revision 6 which is draft SPC\-6 +dated 22 October 2021. It can be found at https://www.t10.org . +.PP +When no options are given, other than a \fIDEVICE\fR, then the "Supported +VPD pages" (0x0) VPD page is fetched and decoded. +.SH OPTIONS +Arguments to long options are mandatory for short options as well. +The options are arranged in alphabetical order based on the long +option name. +.TP +\fB\-a\fR, \fB\-\-all\fR +decode all VPD pages. When used with \fIDEVICE\fR the pages to be decoded +are found in the "Supported VPD pages" VPD page. Pages that cannot be +decoded are displayed in hex; add the \fI\-\-long\fR option to have ASCII +displayed to the right of each line of hex. +.br +If this option is used with the \fI\-\-inhex=FN\fR option then the file +\fIFN\fR is assumed to contain 1 or more VPD pages (in ASCII hex or binary). +Decoding continues until the file is exhausted (or an error occurs). Sanity +checks are applied on each VPD page's length and the ascending order of VPD +page numbers (required by SPC\-4) so bad data may be detected. +.br +If the \fI\-\-page=PG\fR option is also given then no VPD page whose page +number is greater than \fIPG\fR (or its numeric equivalent) is decoded. +.TP +\fB\-e\fR, \fB\-\-enumerate\fR +list the names of the known VPD pages, first the standard pages (i.e. +those defined by T10), then the vendor specific pages. Each group is sorted +in abbreviation order. The \fIDEVICE\fR and most other options are ignored +and this utility exits after listing the VPD page names. May be used together +with \fI\-\-page=PG\fR where \fIPG\fR is numeric. If so, it searches for the +summary lines of all VPD pages whose number matches \fIPG\fR. May be used +with \fI\-\-vendor=VP\fR to restrict output to known vendor specific pages +for vendor/product \fIVP\fR. +.TP +\fB\-E\fR, \fB\-\-examine\fR +scan part of all of the VPD space (page numbers 0x0 to 0xff) and output any +pages found. If this option is given once, the scan starts at page 0x80; +if it is given twice, the scan starts at 0x0; and if given three times the +scan starts at 0xc0. This option takes no notice of the contents of VPD page +0x0 which should contain a list of all supported VPD pages. Some vendors +either forget to list some standard pages or perhaps purposely don't list +vendor specific pages which are in the range 0xc0 to 0xff. +.br +If the \fI\-\-page=PG\fR option is not given then the scan finishes at page +0xff. if the \fI\-\-page=PG\fR option is given then the scan finishes at +page \fIPG\fR. A check is made before the scan to make sure the start page +is less than or equal to the finish page; if not the start and finish page +numbers are swapped. +.br +The sdparm utility which lists mode and VPD pages also has a \fB\-\-examine\fR +option will similar functionility. Note that T10 has changed most of the +pages that list supported pages (e.g. VPD, mode and log pages; supported +commands) to add the weasel words "may or may not list all ...". +.TP +\fB\-f\fR, \fB\-\-force\fR +As a sanity check, the normal action when fetching VPD pages other than +page 0x0 (the "Supported VPD pages" VPD page), is to first fetch page 0x0 +and only if the requested page is one of the supported pages, to go ahead +and fetch the requested page. +.br +When this option is given, skip checking of VPD page 0x0 before accessing +the requested VPD page. The prior check of VPD page 0x0 is known to +crash certain USB devices, so use with care. +.TP +\fB\-h\fR, \fB\-\-help\fR +outputs the usage message summarizing command line options then exits. +Ignores \fIDEVICE\fR if given. +.TP +\fB\-H\fR, \fB\-\-hex\fR +outputs the requested VPD page in ASCII hexadecimal. Can be used multiple +times, see section on the ATA information vpd page. +.br +To generate output suitable for placing in a file that can be used by a +later invocation with the \fI\-\-inhex=FN\fR option, use the '\-HHHH' +option (e.g. 'sg_vpd \-p di \-HHHH /dev/sg3 > dev_id.hex'). The +reason '\-HHHH' is used is to flag that unadorned hexadecimal (without other +text or address offsets) is sent to stdout. +.TP +\fB\-i\fR, \fB\-\-ident\fR +decode the device identification (0x83) VPD page. When used once this option +has the same effect as '\-\-page=di'. When use twice then the short form of +the device identification VPD page's logical unit designator is decoded. In +the latter case this option has the same effect as '\-\-quiet \-\-page=di_lu'. +.TP +\fB\-I\fR, \fB\-\-inhex\fR=\fIFN\fR +\fIFN\fR is expected to be a file name (or '\-' for stdin) which contains +ASCII hexadecimal or binary representing a VPD page (or a standard INQUIRY) +response. This utility will then decode that response. It is preferable to +also supply the \fI\-\-page=PG\fR option, if not this utility will attempt +to guess which VPD page (or standard INQUIRY) the response is associated +with. The hexadecimal should be arranged as 1 or 2 digits representing a +byte each of which is whitespace or comma separated. Anything from and +including a hash mark to the end of line is ignored. If the \fI\-\-raw\fR +option is also given then \fIFN\fR is treated as binary. +.TP +\fB\-j\fR, \fB\-\-json[\fR=\fIJO\fR] +output is in JSON format instead of human readable form. See sg3_utils_json +manpage or use '?' for \fIJO\fR for a summary. +.TP +\fB\-l\fR, \fB\-\-long\fR +when decoding some VPD pages, give a little more output. For example the ATA +Information VPD page only shows the signature (in hex) and the IDENTIFY +(PACKET) DEVICE (in hex) when this option is given. +.TP +\fB\-m\fR, \fB\-\-maxlen\fR=\fILEN\fR +where \fILEN\fR is the (maximum) response length in bytes. It is placed in the +cdb's "allocation length" field. If not given (or \fILEN\fR is zero) then +252 is used (apart from the ATA Information VPD page which defaults to 572) +and, if the response indicates this value is insufficient, another INQUIRY +command is sent with a larger value in the cdb's "allocation length" field. +If this option is given and \fILEN\fR is greater than 0 then only one INQUIRY +command is sent. Since many simple devices implement the INQUIRY command +badly (and do not support VPD pages) then the safest value to use for +\fILEN\fR is 36. See the sg_inq(8) man page for the more information. +.TP +\fB\-p\fR, \fB\-\-page\fR=\fIPG\fR +where \fIPG\fR is the VPD page to be decoded or output. The \fIPG\fR argument +can either be an abbreviation, a number or a pair or numbers/abbreviations +separated by a comma. The VPD page abbreviations can be seen by using the +\fI\-\-enumerate\fR option. If a number is given it is assumed to be decimal +unless it has a hexadecimal indicator which is either a leading '0x' or a +trailing 'h'. If one number is given then it is assumed to be a VPD page +number. If two numbers (or abbreviations) are given then the second one is +the same as \fIVP\fR (see the \fI\-\-vendor=VP\fR option). If this option +is not given (nor '\-i', '\-l' nor '\-V') then the "Supported VPD pages" (0x0) +VPD page is fetched and decoded. If \fIPG\fR is '\-1' or 'sinq' then the +standard INQUIRY response is output. This option may also be used with the +\fI\-\-enumerate\fR (see its description). +.br +If \fIPG\fR is not found in the 'Supported VPD pages' VPD page (0x0) then +EDOM is returned. To bypass this check use the \fI\-\-force\fR option. +.TP +\fB\-q\fR, \fB\-\-quiet\fR +suppress the amount of decoding output. +.TP +\fB\-r\fR, \fB\-\-raw\fR +if not used with \fI\-\-inhex=FN\fR then output requested VPD page in binary. +The output should be piped to a file or another utility when this option is +used. The binary is sent to stdout, and errors are sent to stderr. +.br +if used with \fI\-\-inhex=FN\fR then the contents of \fIFN\fR is treated as +binary. +.TP +\fB\-Q\fR, \fB\-\-sinq_inraw\fR=\fIRFN\fR +where \fIRFN\fR is a filename containing binary standard INQUIRY response +data that matches either \fIDEVICE\fR or \fIFN\fR. Linux places this +standard INQUIRY response in its sysfs pseudo filesystem. A typical +location is at /sys/class/scsi_disk/<hctl>/device/inquiry where <hctl> is +a four part numeric tuple separated by colons. This tuple distinguishes +the device from any others on the system. Linux also places some VPD page +responses in binary in the same directory with names like "vpd_pg83" where +the last two digits form the hexadecimal VPD page number whose binary +contents are therein. +.br +Some VPD pages (e.g. the Extended Inquiry VPD page) depend on knowing +the settings in the standard INQUIRY response to interpret the fields +in that VPD page. This option together with the \fI\-\-all\fR, +\fI\-\-examine\fR or \fI\-\-page=PG\fR allows this utility to process +both the standard INQUIRY response and VPD pages in the same invocation. +.TP +\fB\-M\fR, \fB\-\-vendor\fR=\fIVP\fR +where \fIVP\fR is a vendor (e.g. "sea" for Seagate) or vendor/product +acronym (e.g. "hp3par" for the 3PAR array from HP). Many vendors have +re\-used the numbers at the beginning of the vendor specific VPD page +range (e.g. page 0xc0) and this option is a way of selecting only those +which are of interest. Using a \fIVP\fR of "xxx" will list the available +acronyms. +.br +If this option is used with \fI\-\-page=PG\fR and \fIPG\fR is an acronym +then this option is ignored. If \fIPG\fR is a number (e.g. 0xc0) then +\fIVP\fR is used to choose the which vendor specific page (e.g. sharing +page number 0xc0) to decode. +.TP +\fB\-v\fR, \fB\-\-verbose\fR +increases the level or verbosity. +.TP +\fB\-V\fR, \fB\-\-version\fR +print out version string then exit. +.SH ATA INFORMATION VPD PAGE +This VPD page (0x89 or 'ai') is defined by the SCSI to ATA Translation +standard. It contains information about the SAT layer, the "signature" of +the ATA device and the response to the ATA IDENTIFY (PACKET) DEVICE +command. The latter part has 512 bytes of identity, capability and +settings data which the hdparm utility is capable of decoding (so this +utility doesn't decode it). +.PP +To unclutter the output for this page, the signature and the IDENTIFY (PACKET) +DEVICE response are not output unless the \fI\-\-long\fR option (or +\fI\-\-hex\fR or \fI\-\-raw\fR) are given. When the \fI\-\-long\fR option +is given the IDENTIFY (PACKET) DEVICE response is output as 256 (16 bit) +words as is the fashion for ATA devices. To see that response as a string of +bytes use the '\-HH' option. To format the output suitable for hdparm to +decode use either the '\-HHH' or '\-rr' option. For example if 'dev/sdb' is +a SATA disk behind a SAT layer then this +command: 'sg_vpd \-p ai \-HHH /dev/sdb | hdparm \-\-Istdin' +should decode the ATA IDENTIFY (PACKET) DEVICE response. +.SH NOTES +Since some VPD pages (e.g. the Extended INQUIRY page) depend on settings +in the standard INQUIRY response, then the standard INQUIRY response is +output as a pseudo VPD page when \fIPG\fR is set to '\-1' or 'sinq'. Also +the decoding of some fields (e.g. the Extended INQUIRY page's SPT field) +is expanded when the '\-\-long' option is given using the standard INQUIRY +response information (e.g. the PDT and the PROTECT fields). +.PP +The \fIDEVICE\fR is opened with a read\-only flag (e.g. in Unix with the +O_RDONLY flag). +.SH EXIT STATUS +The exit status of sg_vpd is 0 when it is successful. Otherwise see +the sg3_utils(8) man page. +.SH EXAMPLES +The examples in this page use Linux device names. For suitable device +names in other supported Operating Systems see the sg3_utils(8) man page. +.PP +To see the VPD pages that a device supports, use with no options. The +command line invocation is shown first followed by a typical response: +.PP + # sg_vpd /dev/sdb +.br +Supported VPD pages VPD page: +.br + Supported VPD pages [sv] +.br + Unit serial number [sn] +.br + Device identification [di] +.br + Extended inquiry data [ei] +.br + Block limits (SBC) [bl] +.PP +To see the VPD page numbers associated with each supported page then +add the '\-\-long' option to the above command line. To view a +VPD page either its number or abbreviation can be given to +the '\-\-page=' option. The page name abbreviations are shown within +square brackets above. In the next example the Extended inquiry data +VPD page is listed: +.PP + # sg_vpd \-\-page=ei /dev/sdb +.br +extended INQUIRY data VPD page: +.br + ACTIVATE_MICROCODE=0 SPT=0 GRD_CHK=0 APP_CHK=0 REF_CHK=0 +.br + UASK_SUP=0 GROUP_SUP=0 PRIOR_SUP=0 HEADSUP=1 ORDSUP=1 SIMPSUP=1 +.br + WU_SUP=0 CRD_SUP=0 NV_SUP=0 V_SUP=0 +.br + P_I_I_SUP=0 LUICLR=0 R_SUP=0 CBCS=0 +.br + Multi I_T nexus microcode download=0 +.br + Extended self\-test completion minutes=0 +.br + POA_SUP=0 HRA_SUP=0 VSA_SUP=0 +.PP +To check if any protection types are supported by a disk use the '\-\-long' +option on the Extended inquiry data VPD page: +.PP + # sg_vpd \-\-page=ei \-\-long /dev/sdb +.br + extended INQUIRY data VPD page: +.br + ACTIVATE_MICROCODE=0 +.br + SPT=1 [protection types 1 and 2 supported] +.br + GRD_CHK=1 +.br + .... +.PP +Search for the name (and acronym) of all pages that share VPD page number +0xb0 . +.PP + # sg_vpd \-\-page=0xb0 \-\-enumerate +.br + Matching standard VPD pages: +.br + bl 0xb0 Block limits (SBC) +.br + oi 0xb0 OSD information +.br + sad 0xb0 Sequential access device capabilities (SSC) +.PP +Some examples follow using the "\-\-all" option. Send an ASCII hexadecimal +representation of all VPD pages to a file: +.PP + # sg_vpd \-\-all \-HHHH /dev/sg3 > all_vpds.hex +.PP +At some later time that file could be decoded with: +.PP + # sg_vpd \-\-all \-\-inhex=all_vpds.hex +.PP +To do the equivalent as the previous example but use a file containing +binary: +.PP + # sg_vpd \-\-all \-\-raw /dev/sg3 > all_vpds.bin +.br + # sg_vpd \-\-all \-\-raw \-\-inhex=all_vpds.bin +.PP +Notice that "\-\-raw" must be given with the second (\-\-inhex) invocation +to alert the utility that all_vpds.bin contains binary as it assumes ASCII +hexadecimal by default. Next we only decode T10 specified VPD pages +excluding vendor specific VPD pages that start at page number 0xc0: +.PP + # sg_vpd \-\-all \-\-page=0xbf \-\-raw \-\-inhex=all_vpds.bin +.PP +In Linux, binary images of some important VPD page responses (e.g. 0, 80h +and 83h) are cached in files within the sysfs pseudo file system. Since +VPD pages hardly ever change their contents, decoding those files will +give the same output as probing the device with the added benefit that +decoding those files doesn't need root permissions. The long and short +forms are shown: +.PP + sg_vpd \-\-raw \-\-inhex=/sys/class/scsi_generic/sg3/device/vpd_pg83 +.PP + sg_vpd \-rI /sys/class/scsi_generic/sg3/device/vpd_pg83 +.PP +If /dev/sg3 is a disk at 2:0:0:0 , then this invocation should give more +verbose output but essentially the same as the previous two examples. +.PP + sg_vpd \-v \-r \-I /sys/class/scsi_disk/2:0:0:0/device/vpd_pg83 +.PP +Further examples can be found on the https://sg.danny.cz/sg/sg3_utils.html +web page. +.SH AUTHOR +Written by Douglas Gilbert +.SH "REPORTING BUGS" +Report bugs to <dgilbert at interlog dot com>. +.SH COPYRIGHT +Copyright \(co 2006\-2022 Douglas Gilbert +.br +This software is distributed under a BSD\-2\-Clause license. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +.SH "SEE ALSO" +.B sg_inq(sg3_utils), sg3_utils(sg3_utils), sdparm(sdparm), hdparm(hdparm) |