diff options
Diffstat (limited to 'doc/sg_rtpg.8')
-rw-r--r-- | doc/sg_rtpg.8 | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/doc/sg_rtpg.8 b/doc/sg_rtpg.8 new file mode 100644 index 00000000..d2ce33c3 --- /dev/null +++ b/doc/sg_rtpg.8 @@ -0,0 +1,64 @@ +.TH SG_RTPG "8" "May 2014" "sg3_utils\-1.39" SG3_UTILS +.SH NAME +sg_rtpg \- send SCSI REPORT TARGET PORT GROUPS command +.SH SYNOPSIS +.B sg_rtpg +[\fI\-\-decode\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-raw\fR] +[\fI\-\-readonly\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fIDEVICE\fR +.SH DESCRIPTION +.\" Add any additional description here +.PP +Send a SCSI REPORT TARGET PORT GROUPS command to \fIDEVICE\fR and +outputs the response. +.PP +Target port group access is described in SPC\-3 and SPC\-4 found at +www.t10.org . The most recent draft of SPC\-4 is revision 37 in which +target port groups are described in section 5.15 . +.SH OPTIONS +Arguments to long options are mandatory for short options as well. +.TP +\fB\-d\fR, \fB\-\-decode\fR +decodes the status code and asymmetric access state from each +target port group descriptor returned. The default action is not +to decode these values. +.TP +\fB\-e\fR, \fB\-\-extended\fR +use extended header format for parameter data. This sets the PARAMETER DATA +FORMAT field in the cdb to 1. +.TP +\fB\-h\fR, \fB\-\-help\fR +output the usage message then exit. +.TP +\fB\-H\fR, \fB\-\-hex\fR +output response in hex (rather than partially or fully decode it). +.TP +\fB\-r\fR, \fB\-\-raw\fR +output response in binary to stdout. +.TP +\fB\-R\fR, \fB\-\-readonly\fR +open the \fIDEVICE\fR read\-only (e.g. in Unix with the O_RDONLY flag). +The default is to open it read\-write. +.TP +\fB\-v\fR, \fB\-\-verbose\fR +increase the level of verbosity, (i.e. debug output). +.TP +\fB\-V\fR, \fB\-\-version\fR +print the version string and then exit. +.SH NOTES +The Report Target Port Groups command should be supported whenever the TPGS +bits in a standard INQUIRY response are greater than zero. [View with +sg_inq utility.] +.SH EXIT STATUS +The exit status of sg_rtpg is 0 when it is successful. Otherwise see +the sg3_utils(8) man page. +.SH AUTHORS +Written by Douglas Gilbert. +.SH "REPORTING BUGS" +Report bugs to <dgilbert at interlog dot com>. +.SH COPYRIGHT +Copyright \(co 2004\-2014 Christophe Varoqui and Douglas Gilbert +.br +This software is distributed under a BSD\-2\-Clause license. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +.SH "SEE ALSO" +.B sg_inq(sg3_utils) |