diff options
Diffstat (limited to 'doc/sg_compare_and_write.8')
-rw-r--r-- | doc/sg_compare_and_write.8 | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/doc/sg_compare_and_write.8 b/doc/sg_compare_and_write.8 new file mode 100644 index 00000000..83ea2ba5 --- /dev/null +++ b/doc/sg_compare_and_write.8 @@ -0,0 +1,244 @@ +.TH "COMPARE AND WRITE" "8" "April 2021" "sg3_utils\-1.47" SG3_UTILS +.SH NAME +sg_compare_and_write \- send the SCSI COMPARE AND WRITE command +.SH SYNOPSIS +.B sg_compare_and_write +[\fI\-\-dpo\fR] [\fI\-\-fua\fR] [\fI\-\-fua_nv\fR] [\fI\-\-grpnum=GN\fR] +[\fI\-\-help\fR] \fI\-\-in=IF\fR [\fI\-\-inw=WF\fR] \fI\-\-lba=LBA\fR +[\fI\-\-num=NUM\fR] [\fI\-\-quiet\fR] [\fI\-\-timeout=TO\fR] +[\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-wrprotect=WP\fR] +[\fI\-\-xferlen=LEN\fR] \fIDEVICE\fR +.SH DESCRIPTION +.\" Add any additional description here +Send the SCSI COMPARE AND WRITE command to \fIDEVICE\fR. This utility fetches +a compare buffer and a write buffer from either one or two files. If the +\fI\-\-inw=WF\fR option is given then the compare buffer is fetched from the +file indicated by the \fI\-\-in=IF\fR while the write buffer is fetched from +the file indicated by the \fI\-\-inw=WF\fR. If the \fI\-\-inw=WF\fR option is +not given then the concatenated compare and write buffers are fetched from the +file indicated by the \fI\-\-in=IF\fR option. +.PP +Those buffers are expected to each contain \fINUM\fR blocks of data. The +compare starts at logical block address \fILBA\fR on the \fIDEVICE\fR and if +the comparison fails (i.e. the provided compare buffer does not equal the data +at \fILBA\fR on the \fIDEVICE\fR) then the COMPARE AND WRITE command finishes +with a sense key of MISCOMPARE. In this case this utility will complete and +set an exit status of 14 (which happens to be the sense key value of +MISCOMPARE). +.PP +If the comparison succeeds then the provided write buffer is stored starting +at \fILBA\fR for \fINUM\fR blocks on the \fIDEVICE\fR. +.PP +The actual number of bytes transferred in the data\-out buffer of the COMPARE +AND WRITE command may need to be given by the user with the +\fI\-\-xferlen=LEN\fR option. \fILEN\fR defaults to (2 * \fINUM\fR * 512) +which is 1024 for the default \fINUM\fR of 1. If the block size is other than +512 then the user will need to use \fI\-\-xferlen=LEN\fR option. If +protection information is given (indicated by a value of \fIWP\fR other than +0 (the default)) then for a \fINUM\fR of 1 \fILEN\fR should be 1040 . Note +that the SCSI READ CAPACITY command is not performed by this utility (e.g. +to find the block size). +.PP +The T10 definition of the SCSI COMPARE AND WRITE command requires that the +\fIDEVICE\fR implement the compare and optional write as an uninterrupted +series of actions. Depending on some other \fIDEVICE\fR settings a +verify operation may occur prior to the compare. +.PP +When a mismatch occurs between the compare buffer and the blocks starting +at \fILBA\fR read from the \fIDEVICE\fR the sense buffer containing the +MISCOMPARE sense key causes several messages to be sent to stderr (including +the offset of the first byte mismatch). To suppress these messages use the +\fI\-\-quiet\fR option. With or without the \fI\-\-quiet\fR option the exit +status will be set to 14. +.PP +This command is defined in SBC\-3 whose most recent revision is 36. SBC\-3 +and other SCSI documents can be found at https://www.t10.org . +.SH OPTIONS +Arguments to long options are mandatory for short options as well. +The options are arranged in alphabetical order based on the long option name. +.TP +\fB\-d\fR, \fB\-\-dpo\fR +Set the DPO bit in the COMPARE AND WRITE CDB +.TP +\fB\-f\fR, \fB\-\-fua\fR +Set the FUA bit in the COMPARE AND WRITE CDB +.TP +\fB\-F\fR, \fB\-\-fua_nv\fR +Set the FUA_NV bit in the COMPARE AND WRITE CDB. This bit was removed in +SBC\-3 revision 35d and its position marked as "reserved". +.TP +\fB\-g\fR, \fB\-\-grpnum\fR=\fIGN\fR +where \fIGN\fR is the value to be placed in the group number field in the +COMPARE AND WRITE CDB. +.TP +\fB\-h\fR, \fB\-\-help\fR +output the usage message then exit. +.TP +\fB\-i\fR, \fB\-\-in\fR=\fIIF\fR +read data (binary) from file named \fIIF\fR. This will either be the combined +compare and write buffers (when the \fI\-\-inw=WF\fR option is not given) or +just the compare buffer (when the \fI\-\-inw=WF\fR option is given). If +\fIIF\fR is '\-' then stdin (e.g. a pipe) is read. +.TP +\fB\-C\fR, \fB\-\-inc\fR=\fIIF\fR +The same as the \fB\-\-in\fR option. +.TP +\fB\-D\fR, \fB\-\-inw\fR=\fIWF\fR +read data (binary) from file named \fIWF\fR. This will the write buffer +that will become the second half of the data\-out buffer sent to the +\fIDEVICE\fR associated with the COMPARE AND WRITE command. Note that +when this option is given then the \fI\-\-in=IF\fR is expected to hold +the associated compare buffer. +.TP +\fB\-l\fR, \fB\-\-lba\fR=\fILBA\fR +where \fILBA\fR is the logical block address to start the COMPARE AND WRITE +command. Assumed to be in decimal unless prefixed with '0x' or has a +trailing 'h'. +.TP +\fB\-n\fR, \fB\-\-num\fR=\fINUM\fR +where \fINUM\fR is the number of blocks, starting at \fILBA\fR, to read +and compare with the verify instance. And given a match, the \fINUM\fR of +blocks to write starting \fILBA\fR. The default value for \fINUM\fR is 1. +.TP +\fB\-q\fR, \fB\-\-quiet\fR +suppress the sense buffer messages associated with a MISCOMPARE sense key +that would otherwise be sent to stderr. Still set the exit status to 14 +which is the sense key value indicating a MISCOMPARE. +.TP +\fB\-t\fR, \fB\-\-timeout\fR=\fITO\fR +where \fITO\fR is the command timeout value in seconds. The default value is +60 seconds. If \fINUM\fR is large (or zero) a WRITE SAME command may require +considerably more time than 60 seconds to complete. +.TP +\fB\-v\fR, \fB\-\-verbose\fR +increase the degree of verbosity (debug messages). +.TP +\fB\-V\fR, \fB\-\-version\fR +output version string then exit. +.TP +\fB\-w\fR, \fB\-\-wrprotect\fR=\fIWP\fR +set the WRPROTECT field in the cdb to \fIWP\fR. The default value is 0 which +implies no protection information is sent (along with the user data) by this +utility. +.TP +\fB\-x\fR, \fB\-\-xferlen\fR=\fILEN\fR +where \fILEN\fR is the data out buffer length in byte. It defaults to (2 * +\fINUM\fR * 512) bytes. If the \fIDEVICE\fR block size is other than 512 +bytes or \fIWP\fR is non\-zero (implying additional protection information) +then this default will be incorrect; the use must supply the correct value +for \fILEN\fR +.SH NOTES +Various numeric arguments (e.g. \fILBA\fR) may include multiplicative +suffixes or be given in hexadecimal. See the "NUMERIC ARGUMENTS" section +in the sg3_utils(8) man page. +.SH EXAMPLES +Before overwriting the first two blocks of whatever (SCSI) storage device +that is chosen, take a small backup. The logical block size is assumed to +be 512 bytes. Take a copy (in backup01.bin) of the first two blocks:: +.PP + # sg_dd if=/dev/sg1 bs=512 of=backup01.bin count=2 + 2+0 records in + 2+0 records out +.PP +.B WARNING: +if /dev/sg1 corresponds to a disk on your system that contains currently +mounted file systems, do _not_ continue. If you can, unmount all file +systems on that disk. If that is not possible, use another disk with no +mounted file systems on it. In Linux the scsi_debug driver is a good +candidate for experimentation. +.PP +Now fill the first block with 0xff bytes: +.PP + # sg_dd iflag=ff bs=512 of=/dev/sg1 count=1 + 1+0 records in + 1+0 records out +.PP +and the second block with 0x0 bytes: +.PP + # sg_dd iflag=00 bs=512 seek=1 of=/dev/sg1 count=1 + 1+0 records in + 1+0 records out +.PP +Now copy those two blocks into a file: +.PP + # sg_dd if=/dev/sg1 bs=512 of=ff00.bin count=2 + 2+0 records in + 2+0 records out +.PP +Now we can do a compare and write command. It is told to compare the first +block (i.e. LBA 0) with the first block in the given file (i.e. ff00.bin). +If they are equal (they should be both full of 0xff bytes). Since the +compare succeeds, it will write the second block in ff00.bin over LBA 0: +.PP + # sg_compare_and_write \-\-in=ff00.bin \-\-lba=0 \-\-num=1 /dev/sg1 + +.PP +No news is good news. Now if we do that command again: +.PP + # sg_compare_and_write \-\-in=ff00.bin \-\-lba=0 \-\-num=1 /dev/sg1 + Miscompare at byte offset: 0 [0x0] + sg_compare_and_write failed: Miscompare +.PP +This is expected. The first sg_compare_and_write ended up writing 0x0 bytes +over LBA 0x0. The second sg_compare_and_write command compares LBA 0x0 with +0xff bytes and fails immediately (i.e. at byte offset: 0). Now we will +overwrite the first 3 bytes of ff00.bin with 0x0: +.PP + # sg_dd bs=1 iflag=00 of=ff00.bin count=3 + 3+0 records in + 3+0 records out +.PP +Notice the 'bs=1' operand. The dd utility (and thus sg_dd) is very useful for +doing small binary edits on a file. Now if we do that sg_compare_and_write +again, it still fails but with a small difference: +.PP + # sg_compare_and_write \-\-in=ff00.bin \-\-lba=0 \-\-num=1 /dev/sg1 + Miscompare at byte offset: 3 [0x3] + sg_compare_and_write failed: Miscompare +.PP +So the bytes at offset 0, 1, and 2 compared equal but not the byte at +offset 3. The SCSI COMPARE AND WRITE will stop on the first micompared +byte. +.SH EXIT STATUS +The exit status of sg_compare_and_write is 0 when it is successful. If the +compare step fails then the exit status is 14. For other exit status values +see the EXIT STATUS section in the sg3_utils(8) man page. +.PP +Earlier versions of this utility set an exit status of 98 when there was a +MISCOMPARE. +.SH AUTHORS +Written by Shahar Salzman. Maintained by Douglas Gilbert. Additions by +Eric Seppanen. +.SH "REPORTING BUGS" +Report bugs to shahar.salzman@kaminario.com or dgilbert@interlog.com +.SH COPYRIGHT +Copyright \(co 2012\-2020 Kaminario Technologies LTD +.br +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: +.br +* Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. +.br +* Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation +and/or other materials provided with the distribution. +.br +* Neither the name of the <organization> nor the names of its contributors may +be used to endorse or promote products derived from this software without +specific prior written permission. + +.br +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL Kaminario Technologies LTD BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +.SH "SEE ALSO" +.B sg_xcopy, sg_receive_copy_results(sg3_utils) |