diff options
Diffstat (limited to 'doc/sg3_utils.8')
-rw-r--r-- | doc/sg3_utils.8 | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/doc/sg3_utils.8 b/doc/sg3_utils.8 index 05d72695..5f93cbd0 100644 --- a/doc/sg3_utils.8 +++ b/doc/sg3_utils.8 @@ -26,10 +26,10 @@ sg_decode_sense can be used to decode SCSI sense data given on the command line or in a file. sg_raw \-vvv will output the T10 name of a given SCSI CDB which is most often 16 bytes or less in length. .PP -SCSI draft standards can be found at http://www.t10.org . The standards +SCSI draft standards can be found at https://www.t10.org . The standards themselves can be purchased from ANSI and other standards organizations. A good overview of various SCSI standards can be seen in -http://www.t10.org/scsi\-3.htm with the SCSI command sets in the upper part +https://www.t10.org/scsi\-3.htm with the SCSI command sets in the upper part of the diagram. The highest level (i.e. most abstract) document is the SCSI Architecture Model (SAM) with SAM\-5 being the most recent standard (ANSI INCITS 515\-2016) with the most recent draft being SAM\-6 revision 4 . SCSI @@ -48,7 +48,7 @@ now standards at INCITS(ANSI) and ISO while SAT\-4 is at the draft stage. The logic to perform the command translation is often called a SAT Layer or SATL and may be within an operating system, in host bus adapter firmware or in an external device (e.g. associated with a SAS expander). See -http://www.t10.org for more information. +https://www.t10.org for more information. .PP There is some support for SCSI tape devices but not for their basic operation. The reader is referred to the "mt" utility. @@ -750,9 +750,9 @@ Some utilities that the author has found useful have been placed in the 'utils' subdirectory. .SH WEB SITE There is a web page discussing this package at -http://sg.danny.cz/sg/sg3_utils.html . The device naming used by this +https://sg.danny.cz/sg/sg3_utils.html . The device naming used by this package on various operating systems is discussed at: -http://sg.danny.cz/sg/device_name.html . There is a git code mirror at +https://sg.danny.cz/sg/device_name.html . There is a git code mirror at https://github.com/hreinecke/sg3_utils . The principle code repository uses subversion and is on the author's equipment. The author keeps track of this via the subversion revision number which is an ascending integer |