diff options
| author | Douglas Gilbert <dgilbert@interlog.com> | 2022-04-17 14:15:24 +0000 |
|---|---|---|
| committer | Douglas Gilbert <dgilbert@interlog.com> | 2022-04-17 14:15:24 +0000 |
| commit | f26bb872bf4f043a1b817c808a6947fcb03ecda4 (patch) | |
| tree | 132ab4d71c41c26fe05e12a57fc9e684ffbd08ec /doc | |
| parent | 5e7262973c7b0bf753e5e560956c176d9d12424d (diff) | |
| download | sg3_utils-f26bb872bf4f043a1b817c808a6947fcb03ecda4.tar.gz | |
sg_lib: add hex2fp(); sg_rtpg: https://github.com/hreinecke/sg3_utils/pull/79 applies; json_builder work
git-svn-id: https://svn.bingwo.ca/repos/sg3_utils/trunk@944 6180dd3e-e324-4e3e-922d-17de1ae2f315
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/scsi_logging_level.8 | 11 | ||||
| -rw-r--r-- | doc/sg3_utils.8 | 2 | ||||
| -rw-r--r-- | doc/sg_rep_zones.8 | 6 |
3 files changed, 14 insertions, 5 deletions
diff --git a/doc/scsi_logging_level.8 b/doc/scsi_logging_level.8 index 062d3f4b..57a5cf4b 100644 --- a/doc/scsi_logging_level.8 +++ b/doc/scsi_logging_level.8 @@ -1,4 +1,4 @@ -.TH SCSI_LOGGING_LEVEL "8" "September 2018" "sg3_utils\-1.45" SG3_UTILS +.TH SCSI_LOGGING_LEVEL "8" "April 2022" "sg3_utils\-1.48" SG3_UTILS .SH NAME scsi_logging_level \- access Linux SCSI logging level information .SH SYNOPSIS @@ -104,6 +104,15 @@ the sg driver use: The output from the sg driver caused by this will go to the system logs (e.g. /var/log/syslog). To reduce the amount of output use a number lower than 7. Using 0 will turn off the tracing and debug. +.PP +To turn on maximum SCSI subsystem logging use: +.PP + scsi_logging_level \-s \-a 7 +.PP +That is probably best done on a system that does not use a SCSI command +device to hold the root file system, or the file system that holds the +system log. Note that SATA disks and USB attached storage nearly always +use the SCSI subsystem. .SH AUTHORS Written by IBM. Small alterations by Douglas Gilbert. .SH "REPORTING BUGS" diff --git a/doc/sg3_utils.8 b/doc/sg3_utils.8 index c1254219..3fe20021 100644 --- a/doc/sg3_utils.8 +++ b/doc/sg3_utils.8 @@ -1,4 +1,4 @@ -.TH SG3_UTILS "8" "March 2022" "sg3_utils\-1.48" SG3_UTILS +.TH SG3_UTILS "8" "April 2022" "sg3_utils\-1.48" SG3_UTILS .SH NAME sg3_utils \- a package of utilities for sending SCSI commands .SH SYNOPSIS diff --git a/doc/sg_rep_zones.8 b/doc/sg_rep_zones.8 index 0f4c2c4c..68fecee2 100644 --- a/doc/sg_rep_zones.8 +++ b/doc/sg_rep_zones.8 @@ -1,4 +1,4 @@ -.TH SG_REP_ZONES "8" "February 2022" "sg3_utils\-1.48" SG3_UTILS +.TH SG_REP_ZONES "8" "April 2022" "sg3_utils\-1.48" SG3_UTILS .SH NAME sg_rep_zones \- send SCSI REPORT ZONES, REALMS or ZONE DOMAINS command .SH SYNOPSIS @@ -162,8 +162,8 @@ condition of closed; 5 for list zones with a zone condition of full; 6 for list zones with a zone condition of read only; 7 for list zones with a zone condition of offline. Other values are 0x10 for list zones with 'RWP recommended' set to true; 0x11 for list zones with non\-sequential write -resource active set to true and 0x3f for list zones with a zone condition -of 'not write pointer'. +resource active set to true, 0x3e for list zones apart from GAP zones, and +0x3f for list zones with a zone condition of 'not write pointer'. .TP \fB\-s\fR, \fB\-\-start\fR=\fILBA\fR where \fILBA\fR is at the start or within the first zone to be reported. The |