Makefile cleanup, from Jan Engelhardt

git-svn-id: https://svn.bingwo.ca/repos/sg3_utils/trunk@635 6180dd3e-e324-4e3e-922d-17de1ae2f315

1 files changed, 45 insertions, 138 deletions

diff --git a/doc/Makefile.in b/doc/Makefile.in
index 3523babd..95261c62 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -77,6 +77,16 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
+@OS_LINUX_TRUE@am__append_1 = \
+@OS_LINUX_TRUE@	rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 \
+@OS_LINUX_TRUE@	sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 \
+@OS_LINUX_TRUE@	sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8
+
+@OS_LINUX_TRUE@am__append_2 = sg_scan.8
+@OS_WIN32_MINGW_TRUE@am__append_3 = sg_scan.8
+@OS_WIN32_MINGW_TRUE@am__append_4 = sg_scan.8
+@OS_WIN32_CYGWIN_TRUE@am__append_5 = sg_scan.8
+@OS_WIN32_CYGWIN_TRUE@am__append_6 = sg_scan.8
 subdir = doc
 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am README
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -257,113 +267,22 @@ target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-@OS_FREEBSD_TRUE@man_MANS = \
-@OS_FREEBSD_TRUE@	sg3_utils.8 sg_decode_sense.8 \
-@OS_FREEBSD_TRUE@	scsi_mandat.8 scsi_readcap.8  scsi_ready.8  scsi_satl.8 \
-@OS_FREEBSD_TRUE@	scsi_start.8  scsi_stop.8 scsi_temperature.8 \
-@OS_FREEBSD_TRUE@	sg_compare_and_write.8 sg_format.8 sg_get_config.8 \
-@OS_FREEBSD_TRUE@	sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 \
-@OS_FREEBSD_TRUE@	sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 \
-@OS_FREEBSD_TRUE@	sg_rdac.8 sg_readcap.8 sg_read_block_limits.8 sg_read_buffer.8 \
-@OS_FREEBSD_TRUE@	sg_read_long.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 \
-@OS_FREEBSD_TRUE@	sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 \
-@OS_FREEBSD_TRUE@	sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 \
-@OS_FREEBSD_TRUE@	sg_sat_read_gplog.8 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 \
-@OS_FREEBSD_TRUE@	sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_turs.8 \
-@OS_FREEBSD_TRUE@	sg_unmap.8 sg_verify.8 sg_vpd.8 sg_write_buffer.8 sg_write_long.8 \
-@OS_FREEBSD_TRUE@	sg_write_same.8 sg_write_verify.8 sg_wr_mode.8 sg_zone.8
-
-
-# sg_dd, sg_emc_trespass(?), sginfo, sg_map26, sg_map, sgm_dd, sgp_dd,
-# sg_rbuf, sg_read, sg_reset, sg_test_rwbuf
-# are Linux only utilities
-#
-# sg_scan is shared by Linux and Win32
-@OS_LINUX_TRUE@man_MANS = \
-@OS_LINUX_TRUE@	rescan-scsi-bus.sh.8 \
-@OS_LINUX_TRUE@	sg3_utils.8 sg_decode_sense.8 scsi_logging_level.8 \
-@OS_LINUX_TRUE@	scsi_mandat.8 scsi_readcap.8  scsi_ready.8  scsi_satl.8 \
-@OS_LINUX_TRUE@	scsi_start.8  scsi_stop.8 scsi_temperature.8 \
-@OS_LINUX_TRUE@	sg_compare_and_write.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 \
-@OS_LINUX_TRUE@	sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sginfo.8 \
-@OS_LINUX_TRUE@	sg_inq.8 sg_logs.8 sg_luns.8 sg_map26.8 sg_map.8 sgm_dd.8 \
-@OS_LINUX_TRUE@	sg_modes.8 sg_opcodes.8 sgp_dd.8 sg_persist.8 sg_prevent.8 sg_raw.8 \
-@OS_LINUX_TRUE@	sg_rbuf.8 sg_rdac.8 sg_read.8 sg_readcap.8 sg_read_block_limits.8 \
-@OS_LINUX_TRUE@	sg_read_buffer.8 sg_read_long.8 sg_reassign.8 sg_referrals.8 \
-@OS_LINUX_TRUE@	sg_rep_zones.8 sg_requests.8 sg_reset.8 sg_reset_wp.8 sg_rmsn.8 \
-@OS_LINUX_TRUE@	sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 \
-@OS_LINUX_TRUE@	sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 \
-@OS_LINUX_TRUE@	sg_scan.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 \
-@OS_LINUX_TRUE@	sg_stpg.8 sg_sync.8 sg_test_rwbuf.8 sg_turs.8 sg_unmap.8 sg_verify.8 \
-@OS_LINUX_TRUE@	sg_vpd.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 \
-@OS_LINUX_TRUE@	sg_write_verify.8 sg_wr_mode.8 sg_xcopy.8 sg_zone.8
-
-@OS_OSF_TRUE@man_MANS = \
-@OS_OSF_TRUE@	sg3_utils.8 sg_decode_sense.8 \
-@OS_OSF_TRUE@	scsi_mandat.8 scsi_readcap.8  scsi_ready.8  scsi_satl.8 \
-@OS_OSF_TRUE@	scsi_start.8  scsi_stop.8 scsi_temperature.8 \
-@OS_OSF_TRUE@	sg_compare_and_write.8 sg_format.8 sg_get_config.8 \
-@OS_OSF_TRUE@	sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 \
-@OS_OSF_TRUE@	sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 \
-@OS_OSF_TRUE@	sg_rdac.8 sg_readcap.8 sg_read_block_limits.8 sg_read_buffer.8 \
-@OS_OSF_TRUE@	sg_read_long.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 \
-@OS_OSF_TRUE@	sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 \
-@OS_OSF_TRUE@	sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 \
-@OS_OSF_TRUE@	sg_sat_read_gplog.8 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 \
-@OS_OSF_TRUE@	sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_turs.8 \
-@OS_OSF_TRUE@	sg_unmap.8 sg_verify.8 sg_vpd.8 sg_write_buffer.8 sg_write_long.8 \
-@OS_OSF_TRUE@	sg_write_same.8 sg_write_verify.8 sg_wr_mode.8 sg_zone.8
-
-@OS_SOLARIS_TRUE@man_MANS = \
-@OS_SOLARIS_TRUE@	sg3_utils.8 sg_decode_sense.8 \
-@OS_SOLARIS_TRUE@	scsi_mandat.8 scsi_readcap.8  scsi_ready.8  scsi_satl.8 \
-@OS_SOLARIS_TRUE@	scsi_start.8  scsi_stop.8 scsi_temperature.8 \
-@OS_SOLARIS_TRUE@	sg_compare_and_write.8 sg_format.8 sg_get_config.8 \
-@OS_SOLARIS_TRUE@	sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 \
-@OS_SOLARIS_TRUE@	sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 \
-@OS_SOLARIS_TRUE@	sg_rdac.8 sg_readcap.8 sg_read_block_limits.8 sg_read_buffer.8 \
-@OS_SOLARIS_TRUE@	sg_read_long.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 \
-@OS_SOLARIS_TRUE@	sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 \
-@OS_SOLARIS_TRUE@	sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 \
-@OS_SOLARIS_TRUE@	sg_sat_read_gplog.8 sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 \
-@OS_SOLARIS_TRUE@	sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 sg_turs.8 \
-@OS_SOLARIS_TRUE@	sg_unmap.8 sg_verify.8 sg_vpd.8 sg_write_buffer.8 sg_write_long.8 \
-@OS_SOLARIS_TRUE@	sg_write_same.8 sg_write_verify.8 sg_wr_mode.8 sg_zone.8
-
-@OS_WIN32_CYGWIN_TRUE@man_MANS = \
-@OS_WIN32_CYGWIN_TRUE@	sg3_utils.8 sg_decode_sense.8 \
-@OS_WIN32_CYGWIN_TRUE@	scsi_mandat.8 scsi_readcap.8  scsi_ready.8  scsi_satl.8 \
-@OS_WIN32_CYGWIN_TRUE@	scsi_start.8  scsi_stop.8 scsi_temperature.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_compare_and_write.8 sg_format.8 sg_get_config.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_rdac.8 sg_readcap.8 sg_read_block_limits.8 sg_read_buffer.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_read_long.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_sat_read_gplog.8 sg_sat_set_features.8 sg_scan.8 sg_senddiag.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_write_buffer.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_wr_mode.8 \
-@OS_WIN32_CYGWIN_TRUE@	sg_zone.8
-
-@OS_WIN32_MINGW_TRUE@man_MANS = \
-@OS_WIN32_MINGW_TRUE@	sg3_utils.8 sg_decode_sense.8 \
-@OS_WIN32_MINGW_TRUE@	scsi_mandat.8 scsi_readcap.8  scsi_ready.8  scsi_satl.8 \
-@OS_WIN32_MINGW_TRUE@	scsi_start.8  scsi_stop.8 scsi_temperature.8 \
-@OS_WIN32_MINGW_TRUE@	sg_compare_and_write.8 sg_format.8 sg_get_config.8 \
-@OS_WIN32_MINGW_TRUE@	sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 \
-@OS_WIN32_MINGW_TRUE@	sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 \
-@OS_WIN32_MINGW_TRUE@	sg_rdac.8 sg_readcap.8 sg_read_block_limits.8 sg_read_buffer.8 \
-@OS_WIN32_MINGW_TRUE@	sg_read_long.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 \
-@OS_WIN32_MINGW_TRUE@	sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 \
-@OS_WIN32_MINGW_TRUE@	sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 \
-@OS_WIN32_MINGW_TRUE@	sg_sat_read_gplog.8 sg_sat_set_features.8 sg_scan.8 sg_senddiag.8 \
-@OS_WIN32_MINGW_TRUE@	sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_sync.8 \
-@OS_WIN32_MINGW_TRUE@	sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_write_buffer.8 \
-@OS_WIN32_MINGW_TRUE@	sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_wr_mode.8 \
-@OS_WIN32_MINGW_TRUE@	sg_zone.8
-
+man_MANS = scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 \
+	scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 \
+	sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 \
+	sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 \
+	sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 \
+	sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_block_limits.8 \
+	sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 \
+	sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 \
+	sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 \
+	sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 \
+	sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 \
+	sg_sync.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 \
+	sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 \
+	sg_write_verify.8 sg_zone.8 $(am__append_1) $(am__append_3) \
+	$(am__append_5)
+CLEANFILES = $(am__append_2) $(am__append_4) $(am__append_6)
 all: all-am
 
 .SUFFIXES:
@@ -512,6 +431,7 @@ install-strip:
 mostlyclean-generic:
 
 clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
@@ -520,14 +440,13 @@ distclean-generic:
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
-@OS_LINUX_FALSE@@OS_WIN32_CYGWIN_FALSE@@OS_WIN32_MINGW_FALSE@distclean-local:
 clean: clean-am
 
 clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-am
 	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-local
+distclean-am: clean-am distclean-generic
 
 dvi: dvi-am
 
@@ -593,35 +512,23 @@ uninstall-man: uninstall-man8
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 	cscopelist-am ctags-am distclean distclean-generic \
-	distclean-libtool distclean-local distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-man8 install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
-	uninstall-am uninstall-man uninstall-man8
-
-
-@OS_LINUX_TRUE@distclean-local:
-@OS_LINUX_TRUE@	rm -f sg_scan.8
-
-@OS_LINUX_TRUE@sg_scan.8 : sg_scan.8.linux
-@OS_LINUX_TRUE@	cp -p sg_scan.8.linux sg_scan.8
-
-@OS_WIN32_MINGW_TRUE@distclean-local:
-@OS_WIN32_MINGW_TRUE@	rm -f sg_scan.8
-
-@OS_WIN32_MINGW_TRUE@sg_scan.8 : sg_scan.8.win32
-@OS_WIN32_MINGW_TRUE@	cp -p sg_scan.8.win32 sg_scan.8
-
-@OS_WIN32_CYGWIN_TRUE@distclean-local:
-@OS_WIN32_CYGWIN_TRUE@	rm -f sg_scan.8
-
-@OS_WIN32_CYGWIN_TRUE@sg_scan.8 : sg_scan.8.win32
-@OS_WIN32_CYGWIN_TRUE@	cp -p sg_scan.8.win32 sg_scan.8
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man8 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags-am uninstall uninstall-am uninstall-man \
+	uninstall-man8
+
+@OS_LINUX_TRUE@sg_scan.8: sg_scan.8.linux
+@OS_LINUX_TRUE@	cp -p $< $@
+@OS_WIN32_MINGW_TRUE@sg_scan.8: sg_scan.8.win32
+@OS_WIN32_MINGW_TRUE@	cp -p $< $@
+@OS_WIN32_CYGWIN_TRUE@sg_scan.8: sg_scan.8.win32
+@OS_WIN32_CYGWIN_TRUE@	cp -p $< $@
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.