put pre_configure build files under archive directory, doco

git-svn-id: https://svn.bingwo.ca/repos/sg3_utils/trunk@113 6180dd3e-e324-4e3e-922d-17de1ae2f315

25 files changed, 3974 insertions, 0 deletions

diff --git a/archive/pre_configure/CHANGELOG b/archive/pre_configure/CHANGELOG
new file mode 100644
index 00000000..0ec4eaac
--- /dev/null
+++ b/archive/pre_configure/CHANGELOG
@@ -0,0 +1,722 @@
+Each utility has its own version number, date of last change and
+some description at the top of its ".c" file. All utilities in the main
+directory have their own "man" pages. There is also a sg3_utils man page.
+
+Changelog for sg3_utils-1.25 [20070711]
+  - sg_dd: add oflag=sparse to step over bs*bpt number of zeros;
+    - with oflag=sparse, write last bs*bpt segment at end or after
+      error so file length of OFILE is appropriate
+    - allow iflag=null and oflag=null which do nothing (placeholders)
+    - when coe>1 then SCSI READ LONG logic remember extended block
+      length of first encountered error
+  - sg_ses: sync with ses2r17
+  - sg_vpd: add block device characteristics VPD page
+  - place source in subversion repository
+
+Changelog for sg3_utils-1.24 [20070507]
+  - sg_raw: new utility to send arbirary SCSI commands
+  - sg_luns: increase number of luns that can be fetched
+    - fix length of raw and hex output
+    - add '--quiet' option to output only ASCII hex
+      representation of each lun
+  - sg_rtpg: update for changes in spc4r09
+  - sg_persist: update documentation, spc-4 references
+    - fix exit status values
+  - sg_inq: update version descriptors per spc4r09
+    - fix '--id' and '--extended'
+    - extend block limits VPD page (sbc3r09)
+  - sg_vpd: extend block limits VPD page (sbc3r09)
+    - append relative target port identifier to SAS target
+      port address with '-iq' option
+  - sg_logs: add decoding for stats+performance log pages
+    - fix showing of page names for pdt > 0
+    - implement '-HH' for single and all pages, fix '-r'
+    - when '--maxlen=' given, only do single fetch
+    - add Tape Alert (ssc), Media and Element statistics (smc) pages 
+    - add '--brief' option
+  - sg_ses: sync with ses2r16
+    - fix bay number for SAS
+  - sg_format: add '--dcrt' and '--security' options
+  - sgm_dd: add 'smmap' oflag for shared_mmap_io testing
+    - add 'dio' oflag
+  - sg_dd, sgp_dd: add 'dio' iflag and oflag
+  - sg_modes: change SAS mode page names per sas2r09
+    - check validity of block descriptors length
+  - sg_pt: change opaque context object from 'void *'
+    to 'struct sg_pt_base *'
+  - sg_opcodes: anticipate extra tmfs from 07-159r0
+  - sg_sat_set_features: add more usage information
+    - add man page
+  - sg_sat_phy_event: add to examples directory
+  - sg_lib: sync asc/ascq codes with spc4r10
+  - Solaris port: using uscsi interface
+
+Changelog for sg3_utils-1.23 [20070131]
+  - sg_read_buffer: new utility
+  - sg_write_buffer: new utility
+  - sg_opcodes, sg_senddiag, sg_logs, sg_modes, sg_start, sg_inq,
+    sg_turs, sg_readcap, sg_rbuf: add getopt_long() based cli;
+    old and new cli selectable, new getopt_long cli is default
+  - scripts: new subdirectory containing some bash scripts
+    - add scripts/README file
+  - sg_reassign: add '--hex' option for grown and primary lists
+  - sg_rtpg: add '--raw' option
+  - sg_lib.h, sg_cmds_basic.h + sg_cmds_extra.h: add C++ 
+    'extern "C" ' wrappers
+    - cleanup C code so it will compile as C++
+  - sg_lib: sync with spc4r08
+    - include <inttypes.h>, use PRId64 instead of %lld form
+    - fix sg_get_sense_str() when empty sense buffer
+  - win32 port: add Makefile.mingw + related support for MinGW
+  - sg_cmds_extra: add sg_ll_read_buffer() and sg_ll_write_buffer()
+  - sg_dd, sgp_dd, sgm_dd, sg_read: use lseek64() instead of llseek.c
+  - sgm_dd: accept coe=<n> for interworking with sg_dd
+  - sg_rdac: fix on non-linux ports
+  - sg_ses: fix spurious warning in additional element status page
+    - '-rr' option outputs a diagnostic page in binary to stdout
+  - sg_opcodes: add command timeout descriptor support (spc4r08)
+    - change linux specific pass through to generic pass through
+  - sg_logs: add 'name=value' decoding for SAS specific lpage
+  - examples+utils subdirectories: remove symlinks
+  - synchronize man pages with usage messages
+  - sg3_utils.spec: rework
+
+Changelog for sg3_utils-1.22 [20061016]
+  - sgp_dd: accept verbose=<n> as well as deb=<n> to ease
+    interworking with sg_dd and sgm_dd
+  - sg_sat_set_features: added to examples directory
+  - sg_lib: sync asc/ascq text with spc4r06
+    - move SG_LIB_CAT_NO_SENSE and SG_LIB_CAT_RECOVERED to
+      20 and 21 respectively; add SG_LIB_CAT_ABORTED_COMMAND
+      at 11 (its sense key value) 
+  - sg_vpd: tweak '--page=sp --quiet' output
+    - change '-HHH' so same as '-rr' (prepares ATA Information
+      (ai) response for hdparm)
+  - sg_requests: add '-s' option to set exit status from
+    parameter data
+  - sg_modes: exit quickly from '-e' if device not ready
+  - sg_logs: sync sas log pages with sas2r05a
+    - expand background scan results log page
+    - add '-m=<max_len>' to limit response length
+    - drop '-scum' and '-sthr' options and add '-select'
+  - sg_write_long: add '--16' option to send 16 byte cdb
+    - add '--wr_uncor' and '--pblock' options
+  - sg_senddiag: cleanup and add sdiag_sas_p1_stop.txt
+    to examples directory
+  - sg_format: add '--cmplst=<n>' option (default: 1)
+    - add '--pfu=<n>' option
+    - expand man page to discuss P/D/C/GLISTs
+  - sg_reassign: add '--primary' option to fetch primary
+    defect list (PLIST) length
+  - sg_readcap: add '-H' option to output response in hex
+    and '-r' to output response in binary to stdout
+    - add logical blocks per physical block (sbc3r07)
+  - sginfo: add PLIST and GLIST designation to defect lists
+  - sg_cmds: split this support file into sg_cmds_basic.[hc]
+    and sg_cmds_extra.[hc]
+    - add sg_ll_ata_pt() (SATL ATA pass) to sg_cmds_extra.[hc]
+  - sg_rdac: fix includes for FreeBSD
+  - sg_dd: add 'coe_limit=' option to exit after <n>
+    consecutive 'coe' type read errors
+  - sgm_dd: print out throughput information when signal arrives
+    if time=1 (like sg_dd does already)
+  - sg_inq: change '-HHH' so same as '-rr'. Now sg_inq, sg_vpd
+    and sdparm output for hdparm with '-HHH'
+    -add '-l=<resp_len>' option
+  - sg_read_long: add '--pblock' option for physical blocks
+  - sg_luns: add '--hex' and '--raw' options
+  - sg_requests: add '--hex' and '--raw' options
+  - sg_scan: windows version added (was previously linux only)
+    - 2 man pages: sg_scan.8l and sg_scan.8w that are installed
+      as sg_scan.8
+  - archive directory: removed all but rescan-scsi-bus.sh
+      - README points to previous version in that directory
+  - sg_sat_identify: add to main directory
+      - rename earlier version to examples/sg__sat_identify.c
+  - sg_ident: rework as spc4r07 changed command names and
+    expanded functionality
+
+Changelog for sg3_utils-1.21 [20060706]
+  - sg_vpd: new utility for decoding VPD pages. sg_inq's cli is
+    cluttered; also borrows from sdparm's VPD handling
+  - sg_rdac: new utility for vendor specific work
+  - sg_lib: add sg_vpd_dev_id_iter() to iterate over di VPD page
+    - add sg_ata_get_chars() to fetch chars from ATA words
+    - sync additional sense code strings with spc4r05a
+    - add SG_LIB_CAT_NOT_READY category when sense_key is NOT READY
+    - add SG_LIB_FILE_ERROR category for open problems
+    - add SG_LIB_SYNTAX_ERROR category for command line problems
+    - broaden SG_LIB_CAT_MEDIA_CHANGED to SG_LIB_CAT_UNIT_ATTENTION
+    - add SG_LIB_CAT_MALFORMED for bad responses
+    - BEWARE: these changes cause confusion if an executable from this
+      version is run with a libsgutils library from 1.20 or earlier
+  - sg_cmds: add SG_LIB_CAT_NOT_READY return to most "ll" functions
+    - alter many utilities to report SG_LIB_CAT_NOT_READY
+  - sg_dd: add retries=<n> option for sg_io
+  - sg_logs: add '-T' option to output protocol specific port log page
+    - add support for log subpages (new in spc4r05)
+    - more sanity checks in Start Stop Cycle Counter page
+  - sg_cmds: add sg_ll_read_long16()
+    - add page_code and subpage_code to sg_ll_log_select()
+    - add subpage_code to sg_ll_log_sense()
+  - sg_read_long: do READ LONG(16) when '--16' given
+  - sg_read: accept and ignore 'of=' arguments
+  - sg_dd: expand medium/hardware error "coe' processing to include
+    the "blank check" sense key (for optical devices)
+  - sg_ses: expand display element (per 05-011r2)
+  - sg_format: clear 'cmplst' bit (for MO disks)
+    - add '--six' ('-6') option for mode sense/select(6)
+  - sg_format + sg_test_rwbuf: fix for when char is unsigned
+  - sg_inq: VPD page 0x89: output ATA IDENTIFY DEVICE strings
+    - for IDENTIFY (PACKET) DEVICE response use sg_ata_get_chars()
+  - sg3_utils.html : new name, was previously u_index.html. Copy
+    placed in doc subdirectory
+  - tools.html : SCSI and storage tools reference, copy placed in
+    doc subdirectory
+  - sg3_utils.8 : add a new man page containing general information
+    especially common exit status values
+  - sg_sat_identify: added to examples directory (SAT passthrough test)
+    - extend to pass through IDENTIFY PACKET DEVICE with '-p' option
+  - sg_sat_chk_power: added to examples directory
+  - sg_sat_smart_rd_data: added to examples directory
+  - sg_chk_asc: added to utils directory to check asc_ascq codes
+  - debian: stop placing archive directory under examples
+    - add build_debian.sh script
+
+Changelog for sg3_utils-1.20 [20060418]
+  - sg_logs: decode phy event descriptors in SAS port specific
+    log page (sas2r03)
+    - new parameter control byte format (spc4r03), subpages to come
+  - update Makefile (linux) to install sg_io_linux.h + sg_linux_inc.h
+  - sg_map26: fix for block device mapping in lk 2.6.16-rc1 and beyond
+    - cope with sysfs removal of 'generic' symlink post lk 2.6.16,
+      anticipate removal of 'tape' symlink
+  - sg_dd, sgm_dd, sgp_dd: fix problem around 0x7fffffff blocks
+  - sg_dd: fix read_long processing error (when 'coe=2' or 3)
+    - expand 'coe=' to take 0...3 (invokes read long with 2 or 3)
+    - allow for SG_GET_RESERVED_SIZE yielding 0, lk 2.6.16 feature
+  - sgp_dd: add 'iflag=' and 'oflag=' arguments; signals (like sg_dd)
+  - sgm_dd: add 'iflag=' and 'oflag=' arguments; signals (like sg_dd)
+  - sg_get_config: double->dual renaming (mmc5r03)
+  - sg_read: add 'dpo=' and 'fua=' options
+    - allow 'count' < 0 (or 'bpt=0') for issuing zero block READs
+    - allow for SG_GET_RESERVED_SIZE yielding 0, lk 2.6.16 feature
+    - add 'no_dxfer=0|1' option
+  - sg_modes: fix exit value when MODE SENSE fails
+    - add '-e' to examine presence of page codes from 0x0 to 0x3e
+  - sg_requests: add '--num=' and '--time' options for timing multiple
+    invocations
+  - sg_inq: fix vpd 0x83 designator code 8 name: "scsi name string"
+  - sg_scan: if lk 2.6, use sysfs to find active sg device nodes
+  - sg_map: if lk 2.6, use sysfs to find active sg device nodes
+  - sg_ses: expand display element (per 05-011r1)
+  - sg_start: add an '-i' option which is equivalent to '--imm=1'
+  - sg_senddiag: update man page showing use of two scripts in
+    examples directory (sdiag_sas_p0_cjtpat.txt and _p1_) 
+  - sg_lib: fix sg_get_sense_descriptors_str() case 9 (ATA Return)
+
+Changelog for sg3_utils-1.19 [20060127]
+  - sg_start: accept '--' options (e.g. 'sg_start --stop')
+    - add '--fl=<n>' option for jump to format layer (mmc5)
+  - sg_logs: background scan log page, resync with sbc3r03
+    - add '-scum' and '-sthr' for setting defaults
+    - add device statistics log page (ssc + adc)
+    - fix "last n" deferred errors/error events incrementing
+    - partial addition of log subpages (spc4r03)
+  - sg_get_config: sync features with mmc5 rev 02b
+  - sg_wr_mode: mask out dpofua bit in mode select header
+  - sg_inq: try harder with '-A' to identify ATA device
+    - broaden meaning of '-d' option to decode ...
+    - decode software interface id VPD page ('-p=84 -d')
+    - decode device capabilities (ssc) VPD page ('-p=b0 -d')
+  - sginfo: correct defect list handling ('-d' and '-G')
+  - sg_verify: improve error processing (e.g. medium errors)
+  - sg_ses: scsi target_initiator port additional element
+     status (ses2r14)
+  - many: arguments that currently accept '0x' or '0X' to
+     indicate a hex number may alternatively take a trailing
+     'h' or 'H' to indicate hex
+  - sg_lib: update asc/ascq strings (spc4r03)
+  - sg_lib+sg_cmds: make independent of linux via
+    sg_pt.h function based interface.
+    - linux pass through code placed in sg_pt_linux.c
+    - rename sg_include.h to sg_linux_inc.h
+    - linux specific code in sg_lib.[hc] moved to
+      sg_io_linux.[hc]
+  - port to FreeBSD: using sg_pt_freebsd.c
+  - port to Tru64: using sg_pt_osf1.c
+  - sg_cmds: add sg_ll_get_config(), sg_ll_format_unit(),
+     sg_ll_reassign_blocks(), sg_ll_persistent_reserve_in+out(),
+     sg_ll_read_long10(), sg_ll_verify10(), sg_ll_write_long10()
+  - sg_persist: add "allow commands" to report capabilities
+  - sg_persist_tst: (examples) takes device node as argument
+  - sg_luns: add "security protocol" wlun
+
+Changelog for sg3_utils-1.18 [20051118]
+  - sg_map26: new utility to map sg devices in lk 2.6
+  - sg_luns: luns > 16,384 (sam-4 rev 4)
+  - sg_ses: bump fan speed field to 11 bits
+    - SAS connector names (ses2r13)
+  - sg_inq: add '-rr' option for "hdparm --Istdin"
+  - sg_get_config: tracking mmc-5
+  - sg_write_long: add support for COR_DIS bit
+  - sg_cmds: add sg_ll_test_unit_ready_progress()
+  - sg_turs: '-p' option shows progress
+  - sg_dd: add 'iflag=' and 'oflag=' options
+    - remove output of mode page info when verbose > 0
+    - add control of DPO bit via iflag/oflag
+  - sg_lib: add sg_get_pdt_str()
+    - update asc/ascq strings
+  - sg_modes + sginfo: add SAS(2) SSP shared mode subpage
+  - doc: rename "html" directory to "doc"
+  - Makefile: add 'libtool --finish' to install
+
+Changelog for sg3_utils-1.17 [20050922]
+  - sg_inq: add '-a' option for ATA information VPD page
+    - add '-b' option for Block limits VPD page (SBC)
+    - add '-A' option for probing ATA or ATAPI device
+    - increase raw ('-r') and verbose ('-v') output for
+      ATA(PI) devices to 512 bytes (was 256 bytes)
+    - output hex ('-H') and verbose response for ATA(PI)
+      devices in 16 bit words (corrected for endianness)
+      - output bytes if '-HH' option given
+    - sync with spc4 rev 02
+  - sg_lib: add dWordHex() and sg_is_big_endian()
+    - sync asc/ascq with spc4 rev 02
+  - sg_cmds: defensive prefill for inquiry commands
+  - sg_opcodes: sync with spc4 rev 02 (add tmf I_T nexus reset)
+  - sginfo: add EBACKERR in Informational exception mode page
+    - add Background control mode page (SBC-3)
+  - sgm_dd: add 'verbose=<n>' option
+
+Changelog for sg3_utils-1.16 [20050810]
+  - sg_ident: new utility to report+set device identifier
+  - sg_map: increase MAX_SG_DEVS from 256 to 2048
+  - debian: new directory to support deb package builds
+  - sg_get_config: add '--current' option, same as '--rt=1'
+    - update for DVD+RW Dual Layer
+  - sg_inq: add notes in source about use of SCSI INQUIRY
+     - decode Management network addresses VPD page ('-m')
+     - decode Mode page policy VPD page ('-M')
+  - sginfo: increase device mapping capability (> 78 disks)
+     - add '-r' option to scan /dev/raw* device nodes [Tim Hunt]
+  - sg_dd: change bpt default value to 32 when bs >= 2048 bytes
+  - sg_ses: mention SAF-TE in man page
+  - sg_readcap: add '-b' option for brief output (2 hex numbers)
+  - sg_cmds: add sg_ll_start_stop_unit(), sg_ll_prevent_allow(),
+      sg_ll_report_dev_id() and sg_ll_set_dev_id()
+  - sg_lib: add extra argument to sense print functions to enable
+      the suppression of the raw output of the sense buffer
+      - resid > 0 warnings now includes number actually fetched
+  - sg_start: add '-load' and '-eject' options
+    - default to start action when no other indication given
+    - change -imm=0|1 option default to 0 (was 1)
+  - gcc 4.0: cleanup warnings (apart from sgp_dd: revisit later)
+
+Changelog for sg3_utils-1.15 [20050605]
+  - sg_cmds: sg_get_mode_page_controls(): improve error processing,
+     add double fetch
+  - sg_turs, sg_rbuf, sg_requests, sg_test_rwbuf, sg_format,
+    sg_dd and sgm_dd: add O_NONBLOCK to open()
+  - sgm_dd: switch to use SG_IO ioctl (that leaves only
+     sgp_dd using the asynchronous sg write()/read() sequence)
+  - sg_ses: sync with rev 12 changes
+  - sg_map: extend to cope with sparse disk device names with
+     up to 3 letters (e.g. /dev/sdaaa) [Nate Dailey]
+  - sg_modes: add '-f' option to flexibly decode broken mode
+     sense responses.
+     - zero prefill response; stop decoding response after 3
+       unit attention mode pages seen (i.e. malformed)
+     - add '-L' option for LLBAA bit in msense 10 cdb
+  - sg_reset: update man page
+  - sg_inq: VPD page 0x83: output eui addresses in hex as well
+  - Makefile: fix bug in rules for sgp_dd (when 'make dep' used)
+  - sg_format: expand explanations in its man page
+  - sg_inq, sg_logs, sg_modes, sg_opcodes, sg_rbuf, sg_readcap,
+    sg_scan, sg_senddiag, sg_start and sg_turs: allow command
+    line to take concaternated options
+  - sg_start: add -start and -stop to parallel "1" and "0"
+  - sg_senddiag: set pf bit with '-l' option
+
+Changelog for sg3_utils-1.14 [20050506]
+  - sg_rmsn: new utility to read media serial number
+  - sg_rtpg: add T_SUP bit report
+  - sg_ses: ses-2 rev 11 changes (mainly to additional element status)
+        - add 'bay number' to SAS additional element status
+  - sg_modes: recognise attached enclosure and medium changer
+  - sg_inq: spell out non-zero peripheral qualifiers
+        - note VS bit preceding MultiP(ort) when latter set
+        - VPD page 0x83: output naa addresses in hex as well
+  - sginfo: recognise attached enclosure and medium changer
+        - increase device mapping capability (to 78 disks)
+          [Tim Hunt]
+  - sg_senddiag: add option to send raw diagnostic page
+  - sg_get_config: update some BD information
+  - sg_reasign: add '-g' option to give grown defect list length
+  - sg_dd: note default bpt value (128) may be too high for cd/dvds
+  - sg_lib: sync with SPC-3 rev 22a [opcodes + asc/q]
+        - add DID_IMM_RETRY and DID_REQUEUE [linux specific "host" bytes]
+  - sg_cmds: add send+receive diagnostic, read defect data commands
+        - add duration output on some commands when verbose > 2
+  - spec: change to produce libsgutils (and -devel variant) as well as
+          sg3_utils binary rpms
+  - sdparm: new utility like hdparm but for SCSI disks (or other devices)
+        - moved to its own package called: sdparm
+
+Changelog for sg3_utils-1.13 [20050313]
+  - sg_format: new utility to format disks (perhaps change block size)
+  - sg_ses: rename "device element" to "additional element" [SES-2 rev 10]
+        - add SAS expander and connector elements; add download
+          microcode and subenclosure nickname diagnostic pages
+        - fix additional element descriptor for SAS
+        - off by 1 error when no type descriptor text in config page
+          <David dot Baldwin at anu dot edu dot au>
+  - sg_logs: log page for background media scan results
+  - sginfo: add "-flba64" option for outputting 64 bit lba defect lists
+  - sg_get_config: additions for BD from MMC-5 rev 1b
+  - sg_lib: add SG_LIB_CAT_ILLEGAL_REQ sense category
+        - add sg_get_sense_progress_fld()
+        - SPC-3 rev21d updates: report + set timestamp
+        - sg_get_num() + sg_get_llnum(): switch to multipliers that
+          are compatible with SI and with IEC 60027-2. Used modern
+          GNU's dd command as guide.
+        - report field replaceable unit code in fixed format
+  - sg_dd: add logic to use read_long on unrecovered read errors when
+           'coe' set, read just prior to error if 'coe' clear
+        - both 'odir' and 'blk_sgio" are honoured on block devices
+        - add 'verbose' switch, output some mode page info when verbose
+        - print out elapsed time/throughput when signal received
+        - add new web page discussing sg_dd, copy in html subdirectory
+  - sg_read: add 'blk_sgio' and 'odir' options
+  - sg_wr_mode: clear mode data length in mode select(10)
+  - sg_test_rwbuf: add long options, allow test to run multiple times
+  - sg_cmds: add sg_get_mode_page_types() [get current, changeable, etc]
+  - llseek.c: add Makefile rule without "-std=c99", breaks on some archs
+
+Changelog for sg3_utils-1.12 [20050121]
+  - sg_wr_mode: new utility to modify (i.e. write to) mode pages
+  - sg_reassign: new utility: issues Reassign Blocks command
+  - sg_rtpg: new utility: issues Report Target Port Groups command
+             [Christophe Varoqui]
+  - ATA IDENTIFY command misspelt as "IDENTITY" in several places
+  - sginfo: tweak SAS mode pages to match sas 1.1 rev 07
+        - add NV_DIS bit to disk caching mode page
+  - sg_map: open /dev/nst* rather than /dev/st* (to stop spurious rewinds)
+  - sg_lib: ATA return sense descriptor
+        - add sg_get_sense_info_fld() to fetch info field from sense data
+        - fix bug in sg_scsi_sense_desc_find()
+        - add sense key specific decoding for fixed format sense data
+  - sg_modes: extend '-p' option to allow '-p=<page_code>,<subpage_code>'
+        - add '-A' option to output all mode pages and subpages
+        - extend '-l' option to show subpages, selected command set pages
+  - sg_inq: fix LUN WWN output in unit path report VPD page (emc)
+            [Hergen Lange]
+  - sg_get_config: some additions for DVD-R dual layer
+  - sg_modes: show write protect (WP) and DpoFua flags for disks
+  - sg_cmds: add llbaa argument to sg_ll_mode_sense10()
+
+Changelog for sg3_utils-1.11 [20041126]
+  - sg_sync: new utility: invokes the synchronize cache command
+  - sg_prevent: new utility: invokes the prevent allow medium removal command
+  - sg_get_config: new utility: get configuration command for dvds and cds
+  - sg_request: fix, allocation length wasn't set
+  - sg_start: remove '-s', as start_stop_unit implicitly syncs caches
+  - sg_ses: add SAS expander element type
+  - sg_inq: add sanity check to unit serial number (VPD page 0x80)
+        - output ANSI version string (e.g. "SPC-2", previously was number)
+        - add '-s' option to decode SCSI Ports VPD page
+  - sg_logs: decoding of format status and non-volatile cache log
+        pages (0x8 and 0x17 in sbc-2)
+  - sg_dd: handle compile error when O_DIRECT not defined
+  - sginfo: tighten sanity checks around Unit serial number VPD page
+
+Changelog for sg3_utils-1.10 [20041030]
+  - sg_readcap, sg_dd, sgm_dd, sgp_dd: fix sg_ll_readcap_10+16 (sg_cmds.c)
+  - sg_luns: new utility to report luns
+  - sg_logs: with '-t' (show temperature) ignore extra parameters in
+        temperature log page (still show them with '-p=d')
+  - sg_ses: clean argument sanity checks
+  - sg_cmds: add more common command wrappers
+
+Changelog for sg3_utils-1.09 [20041022]
+  - sg_ses: new utility to get status and set control on SES devices
+  - sg_verify: new utility to verify block devices
+  - sg_emc_trespass: new utility for EMC specific trespass mode page
+  - sg_request: new utility that sends a REQUEST SENSE command
+  - sg_logs: '-r' to reset to manufacturer's defaults
+      - decode last n error events and last n deferred errors pages
+      - add names of ADC log pages
+  - sg_inq: update to SPC-3 rev 21
+      - decode Extended INQUIRY data VPD page [0x86] {'-x'}
+      - decode Unit Path Report VPD page [0xc0] (EMC) {'-P'}
+  - sginfo: decode SAS protocol specific lu mode page
+  - sg_err: convert to sg_lib + update to SPC-3 rev 21
+      - change GPL to FreeBSD license
+      - flag vendor specific asc/ascq ranges
+  - libsgutils: library made from sg_lib.c and sg_cmds.c
+    - rpm "spec" file additionally builds a "-devel" rpm with
+      static libsgutils.a and sg_lib.h and sg_cmds.h
+  - utils/hxascdmp.c: add FreeBSD license
+  - sg_persist: additions to man page
+      - add sg_persist_tst.sh example script to examples directory
+  - sg_turs: add '-v' and '-V' options
+  - sg_senddiag: add '-v' option
+
+Changelog for sg3_utils-1.08 [20040831]
+  - sg_inq: fix noisy message when EVPD and raw modes set
+      - for VPD page 0, list supported page names if known {'-e'}
+      - add '-d' option to list version descriptors
+  - sg_opcodes: numerically sort list of opcodes unless '-u' given
+      - add '-a' to sort alphabetically list of opcode names
+      - add '-t' to report supported task management functions
+  - sg_persist: add 'register and move" PROUT service action
+      - add transportId support, document in sg_persist.8 and example
+  - sg_modes: handle subpage code for known pages (e.g. control extension)
+      - clean up sense buffer handling (allow for descriptor format)
+      - SPC-3 draft revision 20a updates
+  - sg_write_long: new utility to exercise WRITE LONG command
+  - sg_read_long: new utility to exercise READ LONG command
+  - sg_err.c: fix compile errors when SG_KERNEL_INCLUDES defined in lk 2.6
+      - sg_includes.h typedef of u64 for BLKGETSIZE64 ioctl in lk 2.4
+      - add safe_strerror(), sg_scsi_normalize_sense(), sg_normalize_sense()
+        and sg_scsi_sense_desc_find() functions
+      - add more sense data descriptor format decoding 
+      - move multiple implementations of dStrHex() into sg_err.c
+  - sg_logs: exit if SCSI INQUIRY fails (e.g. when applied to ATA disk)
+  - sginfo: bug fixes and SPC-3 revision 20a updates
+      - add '-E' option to access Control Extension mode (sub)page
+  - sg_start: change '-d' switch to '-v' (verbose) switch for consistency
+      - document extra power condition states in man page
+  - sg_readcap: output rto_en and prot_en bits from long read capacity data
+  - add COVERAGE file to list SCSI command coverage
+
+Changelog for sg3_utils-1.07 [20040708]
+  - sginfo: clean up inquiry vendor,product,revision strings
+      - '-Fhead': sort defect list by head 
+        Tom Steudten <steudten at mx dot ch>
+  - rework sg_err for better command name coverage: service actions,
+    variable length and peripheral device type
+      - update asc,ascq codes to SPC-3 revision 19
+  - move scsi_devfs_scan to archive directory
+  - add sg_opcodes utility to list supported operation codes
+  - add sg_persist utility to support persistent reservations
+  - add '-i' option to sg_inq to decode device identification VPD page (0x83)
+  - sg_inq tries an ATA IDENTIFY if SCSI INQUIRY fails
+  - sg_dd, sgm_dd and sgp_dd calculate block device sizes (if count not given)
+  - drop SG_GET_VERSION_NUM ioctl guard in most utilities
+
+Changelog for sg3_utils-1.06 [20040426]
+  - sg_logs: some HBAs don't like odd transfer lengths so increment
+      - do INQUIRY and output product strings
+      - add ASCII rendering of the Protocol specific SAS page
+      - add '-v' verbose option to output cdb
+  - sg_scan: optionally take device file names (e.g. /dev/hdc and /dev/sda)
+      - only request 36 byte INQUIRY responses
+  - sg_err: add sg_decode_sense() function
+  - sg_inq: update output (ref: SPC-3 t10/1416-d rev 17, 28 January 2004)
+      - remove '-p' option to print out PCI address of host
+      - add '-v' verbose option to output cdb
+  - sginfo: allow '-u' to take hex arguments (prefixed by '0x'),
+            when subpage value is 255 show multiple subpages
+      - accept /dev/hd? ATAPI devices directly in lk 2.6
+      - add '-t <pn>[,<spn>]' argument; like '-u' but decodes page
+        if it recognizes it
+      - drop '-L' argument
+      - add cd/dvd, tape, SES, more disk and more SPC-3 decoded mode pages
+      - add transport protocol decoded mode pages for SPI-4, FCP and SAS
+  - sg_modes: print all subpages when '-subp=ff' is selected
+      - do INQUIRY and output product strings
+      - add '-v' verbose option to output cdb
+  - Makefile: add -W compile flag and fix exposed warnings
+  - .spec file: change to build on Mandrake without errors
+
+Changelog for sg3_utils-1.05 [20031112]
+  - sginfo: major rework; add IE page, clean up control, cache +
+        disconnect pages (as per SPC-3 and SBC-2). 
+      - when storing, update saved page (change from previous version)
+      - use 10 byte mode sense and select by default (override with '-6')
+      - mode subpage support
+  - sg_dd, sgm_dd + sgp_dd: 
+      - 64 bit capable (read capacity; count, skip and seek values). 
+      - numerical arguments accept hex (prefixed by '0x' or '0X')
+      - require bpt > 0
+      - fix problem when reading /dev/null
+  - sg_dd: Treat SIGUSR1 properly: print stats and continue;
+  - sgp_dd: reduce READ CAPACITY response size to 8 bytes
+  - sg_read: require bpt > 0
+  - sg_test_rwbuf: switch from sg_header to sg_io_hdr interface
+    N.B. After these changes no sg3_utils utilities (in the main directory)
+    use the sg_header interface
+  - sg_scan: switch from sg_header to sg_io_hdr interface
+  - sg_senddiag: increase extended foreground timeout to 60 minutes
+  - sg_inq: add names of peripheral device types
+  - sg_readcap: show total size in bytes, MB, GB
+  - sg_logs: read log pages twice (first time to get response length), for
+    fragile HBAs; decode Seagate 0x37 + 0x3e pages; display pcbs
+  - sg_modes: fix core dump when corrupted response, don't print extra pages
+  - sg_map: increase sg device scanning from 128 to 256
+  - change man page references from lk 2.5 to lk 2.6
+  - examples/sg_iovec_tst: added testing sg_iovec (sg_io_hdr iovec's)
+    [retrospective addition to this log: "#define __user" added into
+     sg_include.h so user space programs aren't broken if they choose
+     to include kernel header.]
+  - utils/hxascdmp: add utility for displaying ASCII hex
+
+Changelog for sg3_utils-1.04 [20030513]
+  - all remaining utilities in the main directory have man pages [thanks
+    to Eric Schwartz <emschwar at debian dot org> for 7 man pages]
+  - add CREDITS file
+  - sg_simple1, sg_simple2, sg_simple3, sg_simple4, sg_simple16 and
+    scsi_inquiry: moved to the examples directory
+  - sg_debug: moved to the archive directory
+  - sg_modes: add '-subp=<n>' for sub page code, suggests 6/10 byte
+    alternative if bad opcode sense received, flip -cpf flag to -pf,
+    add page names for most peripheral types
+  - sg_turs: default '-n=' argument to 1, only when '-n=1' print error
+    message in full
+  - sg_logs: print temperature "<not available>" for 255, '-t' switch
+    for temperature (from either temperature or IE log page)
+  - sg_dd: add '-odir=0|1' switch for O_DIRECT on block devices
+  - sg_start: add '-imm', '-loej' and 'pc=<n>' switches plus man page
+  - sg_readcap: add '-pmi' and 'lba=<n>' switches
+  - open files O_NONBLOCK in sg_inq, sg_modes and sg_logs so they
+    can be used on cd/dvd drivers when there is no disk present
+
+Changelog for sg3_utils-1.03 [20030402]
+  - sg_senddiag: added, allows self tests and listing of diag pages
+  - sg_start: changed to use SG_IO so works on block devices
+  - sg_err: print out some "sense key specific" data [Trent Piepho]
+  - sg_modes: add "-6" switch for force 6 byte MODE SENSE [Trent Piepho]
+  - sg_modes: more information on page codes and controls
+  - sg_inq, sg_modes, sg_logs, sg_senddiag: add man pages
+  - sg_dd: add "append=0|1" switch for glueing together large files
+  - note in README about utilities offered by scsirastools package
+
+Changelog for sg3_utils-1.02 [20030101]
+  - sg_inq: check if cmddt or evpd bits ignored
+  - sg_inq: warn -o=<n> not used for standard INQUIRY
+  - sg_turs: add -t option to time Test Unit Ready commands
+  - sg_errs: (used by most utilities) warn if sense buffer empty
+  - sg_modes: make safe with block SG_IO (bypass SG_GET_SCSI_ID ioctl)
+  - sg_logs: make safe with block SG_IO, self-test page work
+  - sg_dd: add "blksg_io=" switch to experiment with block SG_IO
+  - sg_read: now use SG_IO ioctl rather than sg write/read
+  - sginfo: fix writing parameters, check for block devices that answer
+    sg's ioctls, recognize "scd<n>" device names
+  - sg_map: stop close error report on tape devices
+  - sg_readcap: make safe with block SG_IO
+  - sg_start: make safe with block SG_IO
+  - sg_test_rwbuf: make safe with block SG_IO
+
+Changelog for sg3_utils-1.01 [20020814]
+----------------------------
+  - add raw switch ("-r") to sg_inq [Martin Schwenke]
+
+Changelog for sg3_utils-1.00 [20020728]
+----------------------------
+  - update sg_err [to SPC-3 T10/1416-D Rev 07 3 May 2002]
+  - "sg_inq -cl" now outputs opcode names
+  - add "continue on error" option to sg_dd
+  - add _LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64 defines to Makefile
+  - drop 'gen' argument from sg_dd and friends, allow any file types
+    except scsi tape device file names
+  - treat of=/dev/null as special (skip write). Accept of=. as alias
+    for of=/dev/null
+  - decode various log pages in sg_logs
+  - add 'dio' argument to sgm_dd for testing "zero copy" copies
+
+Changelog for sg3_utils-0.99 [20020317]
+----------------------------
+  - add 'fua' and 'sync' arguments to sg_dd, sgp_dd and sgm_dd
+  - improve sg_inq, add "-cl" and "-36" arguments
+  - add sg_modes + sg_logs for MODE SENSE and LOG SENSE queries
+  - add rescan-scsi-bus.sh [Kurt Garloff] to archive directory
+
+Changelog for sg3_utils-0.98 [20020216]
+----------------------------
+  - move sg_reset back from archive to main directory + build
+  - sprintf() to snprintf() changes
+  - add "time=<n>" argument to sg_dd, sgp_dd and sgm_dd to time transfer
+  - add man pages for sgm_dd and sg_read, update sg_dd and sgp_dd man pages
+  - add "cdbsz=" argument to sg_dd, sgp_dd, sgm_dd + sg_read
+  - add "gen=0|1" argument to sg_dd
+
+Changelog for sg3_utils-0.97 [20011223]
+----------------------------
+  - move isosize to archive since introduced into util-linux-2.10s
+
+Changelog for sg3_utils-0.96 [20011221]
+----------------------------
+  - add '-p' switch to sg_inq to provide PCI slot_name
+  - add '-n' switch to scsi_inquiry for non-blocking open
+  - new sgm_dd (dd variant) using mmap-ed IO
+  - sg_rbuf now has a '-m' argument to select mmap-ed IO
+  - sg_rbuf now has a '-t' switch to do timing + throughput calculation
+  - add sg_simple4 to demonstrate mmap-ed IO on an INQUIRY response
+  - add sg_simple16 to do a READ_16 (16 byte SCSI READ command)
+  - mmap-ed IO requires sg version 3.1.22 or later
+  - add sg_read to read multiple times starting at same offset
+
+Changelog for sg3_utils-0.95 [20010915]
+----------------------------
+  - make sg_dd, sgp_dd and archive/sgq_dd warn if dio selected but
+    /proc/scsi/sg/allow_dio is '0'
+  - sg_map can now do any INQUIRY (when '-i' argument given)
+  - expand example in scsi_inquiry
+
+Changelog for sg3_utils-0.94 [20010419]
+----------------------------
+  - add sg_start, documented in README.sg_start [Kurt Garloff]
+  - add osst suport in sg_map [Kurt Garloff]
+  - improvements to sginfo [Kurt Garloff]
+
+Changelog for sg3_utils-0.93 [20010415]
+----------------------------
+  - more include file fine tuning
+  - some "dio" work sg_rbuf
+  - extend sgp_dd so "continue on error" works on normal files
+  - introduce sg_include.h to encapsulate sg include problems
+  - add scsi_devfs_scan
+  - add sg_bus_xfer to archive directory
+  - more error info in sginfo
+
+Changelog for sg3_utils-0.92 [20010116]
+----------------------------
+  - change sg_err.c output from stdout to stderr
+  - change sg_debug to call system("cat /proc/scsi/sg/debug");
+  - fix in+out totals in sg_dd and sgp_dd when partial transfers
+  - lower include dependencies in sg_err.h
+  - add sgq_dd + Makefile to archive directory
+
+Changelog for sg3_utils-0.91 [20001221]
+----------------------------
+  - signalling handling added to sg_dd (and documented in sg_dd.8)
+  - add man page for sg_rbuf (and a small change to its code)
+  - add "-d" switch to isosize and cope with > 2 GB (and man page)
+
+Changelog for sg3_utils-0.90
+----------------------------
+  - switch from dated versioning. Previous version was sg3_utils001012.
+    Arbitrarily start at package version 0.90 . Start Changelog.
+  - incorporate Kurt Garloff's patches from Suse scsi.spm source rpm
+    compilation:
+    - add Kurt Garloff's sg_test_rwbuf utility to read and write to disk
+      buffer
+    - clean up Makefile to include a "make install" (and also add a
+      "make uninstall").
+    - add "-uno" switch to sginfo
+  - make raw and sg devices equally acceptable to sg_dd and sgp_dd.
+    [Raw devices still not as fast as sg devices doing disk to disk
+    copies in sgp_dd but this may be improved soon. Still faster than
+    using dd!]
+  - change lseek() in sg_dd and sgp_dd to _llseek() [using code borrowed
+    from fdisk] so big disks can be properly offset with 'skip' and
+    'seek' arguments. [This change is significant for raw devices and
+    normal files since sg devices already use 31 bit block addressing.]
+  - rename sg_s3_inq to sg_inq. This utility allows the INQUIRY response
+    to be decoded as per SCSI 3 and 4. Also can probe EVPD and CmdDt pages.
+  - change multiplier suffixes on sg_dd, sgp_dd and sg_turs so lower case
+    "k, m, g" are powers of 2 while "K, M, G" are powers of 10. This idea
+    borrowed from lmdd (lmbench suite)
+  - retire a few more less used utilities into the archive directory.
+  - add man pages for sg_dd, sgp_dd and sg_map
diff --git a/archive/pre_configure/INSTALL_pre b/archive/pre_configure/INSTALL_pre
new file mode 100644
index 00000000..7cf0a33a
--- /dev/null
+++ b/archive/pre_configure/INSTALL_pre
@@ -0,0 +1,144 @@
+Unless otherwise noted, these install instructions are for the
+Linux operating system. See below for other operating systems.
+
+By default, the Makefile will build for Linux with a shared library.
+The invocation sequence is:
+
+make
+make install    [may need root permission]
+
+Unless overridden or edited in the Makefile, INSTDIR places the executables
+in the /usr/local/bin directory, LIBDIR places libraries in the
+/usr/local/lib directory, MANDIR places the man pages in the
+/usr/local/share/man directory and INCLUDEDIR places header files in the
+/usr/local/include/scsi directory. For FreeBSD the default MANDIR is
+/usr/local/man .
+
+Other Makefile targets that might be useful:
+make clean      # remove .o, executables, core and .depend file
+make depend     # generate dependency hierarchy in .depend file
+make dep        # same as 'make depend'
+make sg_inq     # build a specific executable (e.g. 'sg_inq')
+make uninstall  # removes executables, libraries and build remnants
+make -f no_lib/Makefile.linux  # build without a library
+
+./make_no_lib.sh sg_inq  # is a simple script; in this case it expands to:
+                         # make -f no_lib/Makefile.linux sg_inq
+
+Note that the main Makefile does _not_ call the Makefiles in the
+subdirectories (i.e. archive, examples and utils directories).
+
+By default, this package now builds a shared library called
+libsgutils.so and the corresponding static library: libsgutils.a .
+The GNU "libtool" is required by sg3_utils to build its libraries.
+The 'make' will build those libraries and executables and put them
+in the ".libs" subdirectory (as libtool requires/enforces).
+The 'make' puts scripts in the main directory with the same names as
+the utilities (e.g. sg_dd, sg_inq etc) which set up an appropriate
+environment and call the "real" executable "hiding" in the ".libs"
+subdirectory.
+The "make install" will install the libraries in the /usr/local/lib
+directory. If an executable cannot find the libsgutils shared library
+(check with 'ldd sg_inq' for example) then the addition of "/usr/local/lib"
+to the /etc/ld.so.conf file may be required in some distributions.
+
+A "spec" file is included for building rpm packages. It is called
+sg3_utils.spec . To build binary and source rpms place a copy of the
+gzipped tarball in the "SOURCES" directory and place a copy of
+sg3_utils.spec in the "SPEC" directory. These directories are found under
+/usr/src/redhat on redhat/fedora distributions. Then from the "SPEC"
+directory execute "rpmbuild -ba sg3_utils.spec". If all goes well a source
+rpm should be found in the SRPMS directory and binary rpms in the RPMS/i386
+directory (for i386 architecture). Note the spec file will only build those
+utilities found in the main directory. When the sg3_utils binary rpm is
+installed the executables and their associated man pages should be placed in
+appropriate places. The sg3_utils.spec file also builds a libsgutils shared
+object (shared library) and a libsgutils-*-devel shared object with a static
+library and the sg_lib.h, sg_cmds.h sg_cmds_basic.h, sg_cmds_extra.h and
+sg_pt.h header files.
+
+Binary rpms (at least in the RedHat distribution) tend to install
+executables in /usr/bin and libraries in /usr/lib .
+
+To build debian "deb" (binary) packages, first untar the tarball, then
+change directory to the top level within the sg3_utils source. Then:
+ # chmod +x debian/rules
+ # dpkg-buildpackage -b -rfakeroot
+The binary deb packages will be placed in the parent directory (of
+the sg3_utils source directory) if all goes well. There is now
+a script called build_debian.sh in the main directory which invokes
+those two commands.
+
+If the shared object (library) is troublesome or unwanted then
+a "no_lib" version of the Makefile and the sg3_utils.spec file
+can be found in the "no_lib" subdirectory.
+
+
+FreeBSD
+=======
+In FreeBSD, the utilities can be built with "make -f Makefile.freebsd".
+This will build a shared object (i.e. libsgutils.so and friends) that
+the utilities depend on. To install use "make -f Makefile.freebsd install".
+These makes depend on libtool. To build without reliance on a shared
+library (and thus libtool) use "make -f no_lib/Makefile.freebsd" (or
+execute the "make_no_lib_freebsd.sh" script which does the same thing).
+Utilities that are linux specific (e.g. sg_map) are not built for
+FreeBSD.
+
+
+Solaris
+=======
+In Solaris, the utilities can be built with "make -f Makefile.solaris".
+This will build a shared object (i.e. libsgutils.so and friends) that
+the utilities depend on. To install use "make -f Makefile.solaris install".
+These makes depend on gcc and libtool. To build without reliance on a shared
+library (and thus libtool) use "make -f no_lib/Makefile.solaris" (or
+execute the "make_no_lib_solaris.sh" script which does the same thing).
+Utilities that are linux specific (e.g. sg_map) are not built for
+Solaris.
+
+
+Tru64 (OSF)
+===========
+In Tru64, the utilities can be built with "make -f Makefile.osf1".
+This will build a shared object (i.e. libsgutils.so and friends) that
+the utilities depend on. To install use "make -f Makefile.osf1 install".
+These makes depend on libtool. To build without reliance on a shared
+library (and thus libtool) use "make -f no_lib/Makefile.osf1" (or
+execute the "make_no_lib_osf1.sh" script which does the same thing).
+Utilities that are linux specific (e.g. sg_map) are not built for
+Tru64.
+
+
+Windows
+=======
+In Windows only the Windows NT, 2000, 2003 and XP operating systems (and
+their variants) are currently supported. The various device names that the
+sg3_utils utilities will accept in Windows can be seen by running the
+sg_scan utility (and perhaps looking at its man page (i.e. sg_scan.8 or
+sg_scan.8w)).
+
+The source tarball can be built in a cygwin or MinGW environment on Windows.
+
+For cygwin see http://www.cygwin.com for more information. Various extras
+such as 'gcc' (the GNU C compiler) and 'make' need to be loaded as they are
+not in the minimal cygwin default distribution. The build command
+is "make -f Makefile.win32" and to install (for a cygwin environment)
+use "make -f Makefile.win32 install". Currently the make doesn't build a
+dll (cf shared libraries are built on Linux and FreeBSD) so the executable
+files are bigger than they need to be. Once built, the various ".exe"
+commands can either be executed in a cygwin shell (typically "bash") or a
+DOS shell. If cygwin has not been installed on the target machine then
+the "cygwin1.dll" (obtained from http://www.cygwin.com ) is required.
+
+There is also the "Minimalist Gnu for Windows" (MinGW) and its associated
+shell (MSYS) that can serve as a build environment for sg3_utils. This
+removes the dependence on the proprietary cygwin1.dll at the expense
+of some timing features. In a MSYS shell untar the sg3_utils tarball and
+in its top level directory use "make -f Makefile.mingw". The executables
+will be placed in that directory. They can be executed in a MSYS or "cmd"
+shell.
+
+
+3rd May 2007
+Doug Gilbert
diff --git a/archive/pre_configure/Makefile b/archive/pre_configure/Makefile
new file mode 100644
index 00000000..4ada4238
--- /dev/null
+++ b/archive/pre_configure/Makefile
@@ -0,0 +1,252 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+LIBDIR=$(DESTDIR)/$(PREFIX)/lib
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/share/man
+INCLUDEDIR=$(DESTDIR)/$(PREFIX)/include
+
+CC = gcc
+LD = gcc
+
+EXECS = sg_dd sgp_dd sgm_dd sg_read sg_map sg_scan sg_rbuf \
+  	sginfo sg_readcap sg_turs sg_inq sg_test_rwbuf \
+ 	sg_start sg_reset sg_modes sg_logs sg_senddiag sg_opcodes \
+ 	sg_persist sg_write_long sg_read_long sg_requests sg_ses \
+	sg_verify sg_emc_trespass sg_luns sg_sync sg_prevent \
+	sg_get_config sg_wr_mode sg_rtpg sg_reassign sg_format \
+	sg_rmsn sg_ident sg_map26 sg_rdac sg_vpd sg_sat_identify \
+	sg_read_buffer sg_write_buffer sg_raw
+
+MAN_PGS = sg_dd.8 sgp_dd.8 sgm_dd.8 sg_read.8 sg_map.8 sg_scan.8 sg_rbuf.8 \
+	sginfo.8 sg_readcap.8 sg_turs.8 sg_inq.8 sg_test_rwbuf.8 \
+	sg_start.8 sg_reset.8 sg_modes.8 sg_logs.8 sg_senddiag.8 \
+	sg_opcodes.8 sg_persist.8 sg_write_long.8 sg_read_long.8 \
+	sg_requests.8 sg_ses.8 sg_verify.8 sg_emc_trespass.8 \
+	sg_luns.8 sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	sg_map26.8 sg_rdac.8 sg_vpd.8 sg3_utils.8 sg_sat_identify.8 \
+	sg_read_buffer.8 sg_write_buffer.8 sg_raw.8
+MAN_PREF = man8
+
+HEADERS = sg_lib.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_pt.h \
+	sg_io_linux.h sg_linux_inc.h
+
+OS_FLAGS = -DSG3_UTILS_LINUX
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+S_CFLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W
+CFLAGS = -g -O2 -Wall -W
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99
+
+CFLAGS_PTHREADS = -D_REENTRANT
+
+LDFLAGS = 
+# LDFLAGS = -v -lm
+
+LIB_VINFO = 1:0:0
+# Perhaps should use "-release RELEASE" instead
+# RELEASE = 1.1
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+
+sg_lib.lo: sg_lib.o
+	libtool --mode=compile $(CC) -c sg_lib.c
+
+sg_cmds_basic.lo: sg_cmds_basic.o
+	libtool --mode=compile $(CC) -c sg_cmds_basic.c
+
+sg_cmds_extra.lo: sg_cmds_extra.o
+	libtool --mode=compile $(CC) -c sg_cmds_extra.c
+
+sg_pt_linux.lo: sg_pt_linux.o
+	libtool --mode=compile $(CC) -c sg_pt_linux.c
+
+libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_linux.lo
+	libtool --mode=link $(LD) -o libsgutils.la sg_lib.lo sg_cmds_basic.lo \
+	sg_cmds_extra.lo sg_pt_linux.lo -rpath $(LIBDIR) \
+	-version-info $(LIB_VINFO)
+
+# libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo
+#	libtool --mode=link $(LD) -o libsgutils.la sg_lib.lo sg_cmds_basic.lo \
+#	sg_cmds_extra.lo -rpath $(LIBDIR) -release $(RELEASE)
+
+sg_inq: sg_inq.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ 
+
+sg_dd: sg_dd.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_scan: sg_scan.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ 
+
+sginfo: sginfo.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_start: sg_start.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ 
+
+sg_rbuf: sg_rbuf.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_readcap: sg_readcap.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sgp_dd.o: sgp_dd.c
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) $(CFLAGS_PTHREADS) \
+	-c -o sgp_dd.o $<
+
+sgp_dd: sgp_dd.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ -lpthread
+
+sgm_dd: sgm_dd.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_map: sg_map.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_turs: sg_turs.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_test_rwbuf: sg_test_rwbuf.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_read: sg_read.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_reset: sg_reset.o
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_modes: sg_modes.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_logs: sg_logs.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_senddiag: sg_senddiag.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_opcodes: sg_opcodes.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_persist: sg_persist.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_long: sg_write_long.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_long: sg_read_long.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_requests: sg_requests.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_ses: sg_ses.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_verify: sg_verify.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_emc_trespass: sg_emc_trespass.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_luns: sg_luns.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_sync: sg_sync.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_prevent: sg_prevent.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_get_config: sg_get_config.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_wr_mode: sg_wr_mode.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_rtpg: sg_rtpg.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_reassign: sg_reassign.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_format: sg_format.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_rmsn: sg_rmsn.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_ident: sg_ident.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_map26: sg_map26.o
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_rdac: sg_rdac.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_sat_identify: sg_sat_identify.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_buffer: sg_read_buffer.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_buffer: sg_write_buffer.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_raw: sg_raw.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	install -d $(LIBDIR)
+	libtool --mode=install install -c libsgutils.la $(LIBDIR)/libsgutils.la
+	libtool --finish $(LIBDIR)
+	for name in $^; \
+	 do libtool --mode=install install -m 755 \
+		$$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+	install -d $(INCLUDEDIR)/scsi
+	for hdr in $(HEADERS); \
+	 do install -m 644 $$hdr $(INCLUDEDIR)/scsi ; \
+	done
+
+uninstall:
+	libtool --mode=uninstall rm -f $(LIBDIR)/libsgutils.la
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+	for hdr in $(HEADERS); do \
+	 rm -f $(INCLUDEDIR)/scsi/$$hdr ; \
+	done
+
+ifeq (.depend,$(wildcard .depend))
+include .depend
+endif
diff --git a/archive/pre_configure/Makefile.asroot b/archive/pre_configure/Makefile.asroot
new file mode 100644
index 00000000..dc3d1990
--- /dev/null
+++ b/archive/pre_configure/Makefile.asroot
@@ -0,0 +1,252 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+LIBDIR=$(DESTDIR)/$(PREFIX)/lib
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/share/man
+INCLUDEDIR=$(DESTDIR)/$(PREFIX)/include
+
+CC = gcc
+LD = gcc
+
+EXECS = sg_dd sgp_dd sgm_dd sg_read sg_map sg_scan sg_rbuf \
+  	sginfo sg_readcap sg_turs sg_inq sg_test_rwbuf \
+ 	sg_start sg_reset sg_modes sg_logs sg_senddiag sg_opcodes \
+ 	sg_persist sg_write_long sg_read_long sg_requests sg_ses \
+	sg_verify sg_emc_trespass sg_luns sg_sync sg_prevent \
+	sg_get_config sg_wr_mode sg_rtpg sg_reassign sg_format \
+	sg_rmsn sg_ident sg_map26 sg_rdac sg_vpd sg_sat_identify \
+	sg_read_buffer sg_write_buffer sg_raw
+
+MAN_PGS = sg_dd.8 sgp_dd.8 sgm_dd.8 sg_read.8 sg_map.8 sg_scan.8 sg_rbuf.8 \
+	sginfo.8 sg_readcap.8 sg_turs.8 sg_inq.8 sg_test_rwbuf.8 \
+	sg_start.8 sg_reset.8 sg_modes.8 sg_logs.8 sg_senddiag.8 \
+	sg_opcodes.8 sg_persist.8 sg_write_long.8 sg_read_long.8 \
+	sg_requests.8 sg_ses.8 sg_verify.8 sg_emc_trespass.8 \
+	sg_luns.8 sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	sg_map26.8 sg_rdac.8 sg_vpd.8 sg3_utils.8 sg_sat_identify.8 \
+	sg_read_buffer.8 sg_write_buffer.8 sg_raw.8
+MAN_PREF = man8
+
+HEADERS = sg_lib.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_pt.h \
+	sg_io_linux.h sg_linux_inc.h
+
+OS_FLAGS = -DSG3_UTILS_LINUX
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+S_CFLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W
+CFLAGS = -g -O2 -Wall -W
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99
+
+CFLAGS_PTHREADS = -D_REENTRANT
+
+LDFLAGS = 
+# LDFLAGS = -v -lm
+
+LIB_VINFO = 1:0:0
+# Perhaps should use "-release RELEASE" instead
+# RELEASE = 1.1
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+
+sg_lib.lo: sg_lib.o
+	libtool --mode=compile $(CC) -c sg_lib.c
+
+sg_cmds_basic.lo: sg_cmds_basic.o
+	libtool --mode=compile $(CC) -c sg_cmds_basic.c
+
+sg_cmds_extra.lo: sg_cmds_extra.o
+	libtool --mode=compile $(CC) -c sg_cmds_extra.c
+
+sg_pt_linux.lo: sg_pt_linux.o
+	libtool --mode=compile $(CC) -c sg_pt_linux.c
+
+libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_linux.lo
+	libtool --mode=link $(LD) -o libsgutils.la sg_lib.lo sg_cmds_basic.lo \
+	sg_cmds_extra.lo sg_pt_linux.lo -rpath $(LIBDIR) \
+	-version-info $(LIB_VINFO)
+
+# libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo
+#	libtool --mode=link $(LD) -o libsgutils.la sg_lib.lo sg_cmds_basic.lo \
+#	sg_cmds_extra.lo -rpath $(LIBDIR) -release $(RELEASE)
+
+sg_inq: sg_inq.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ 
+
+sg_dd: sg_dd.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_scan: sg_scan.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ 
+
+sginfo: sginfo.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_start: sg_start.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ 
+
+sg_rbuf: sg_rbuf.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_readcap: sg_readcap.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sgp_dd.o: sgp_dd.c
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) $(CFLAGS_PTHREADS) \
+	-c -o sgp_dd.o $<
+
+sgp_dd: sgp_dd.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^ -lpthread
+
+sgm_dd: sgm_dd.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_map: sg_map.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_turs: sg_turs.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_test_rwbuf: sg_test_rwbuf.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_read: sg_read.o sg_io_linux.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_reset: sg_reset.o
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_modes: sg_modes.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_logs: sg_logs.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_senddiag: sg_senddiag.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_opcodes: sg_opcodes.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_persist: sg_persist.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_long: sg_write_long.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_long: sg_read_long.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_requests: sg_requests.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_ses: sg_ses.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_verify: sg_verify.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_emc_trespass: sg_emc_trespass.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_luns: sg_luns.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_sync: sg_sync.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_prevent: sg_prevent.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_get_config: sg_get_config.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_wr_mode: sg_wr_mode.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_rtpg: sg_rtpg.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_reassign: sg_reassign.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_format: sg_format.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_rmsn: sg_rmsn.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_ident: sg_ident.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_map26: sg_map26.o
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_rdac: sg_rdac.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_sat_identify: sg_sat_identify.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_buffer: sg_read_buffer.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_buffer: sg_write_buffer.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+sg_raw: sg_raw.o libsgutils.la
+	libtool --mode=link $(LD) -o $@ $(LDFLAGS) $^
+
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	install -d $(LIBDIR)
+	libtool --mode=install install -c libsgutils.la $(LIBDIR)/libsgutils.la
+	libtool --finish $(LIBDIR)
+	for name in $^; \
+	 do libtool --mode=install install -m 755 -s -o root -g root \
+		$$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -o root -g root -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+	install -d $(INCLUDEDIR)/scsi
+	for hdr in $(HEADERS); \
+	 do install -o root -g root -m 644 $$hdr $(INCLUDEDIR)/scsi ; \
+	done
+
+uninstall:
+	libtool --mode=uninstall rm -f $(LIBDIR)/libsgutils.la
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+	for hdr in $(HEADERS); do \
+	 rm -f $(INCLUDEDIR)/scsi/$$hdr ; \
+	done
+
+ifeq (.depend,$(wildcard .depend))
+include .depend
+endif
diff --git a/archive/pre_configure/Makefile.freebsd b/archive/pre_configure/Makefile.freebsd
new file mode 100644
index 00000000..53cddce4
--- /dev/null
+++ b/archive/pre_configure/Makefile.freebsd
@@ -0,0 +1,206 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+LIBDIR=$(DESTDIR)/$(PREFIX)/lib
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/man
+INCLUDEDIR=$(DESTDIR)/$(PREFIX)/include
+
+CC = gcc
+LD = gcc
+# LIBTOOL = libtool15
+LIBTOOL = libtool
+LT_EXTRA = --tag=junk
+
+EXECS = sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs \
+	sg_senddiag sg_persist sg_requests sg_ses sg_luns \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+MAN_PREF = man8
+
+HEADERS = sg_lib.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_pt.h
+
+OS_FLAGS = -DSG3_UTILS_FREEBSD
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+S_CFLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W
+CFLAGS = -g -O2 -Wall -W
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99
+
+CFLAGS_PTHREADS = -D_REENTRANT
+
+LDFLAGS = -lcam 
+# LDFLAGS = -v -lm
+
+LIB_VINFO = 1:0:0
+# Perhaps should use "-release RELEASE" instead
+# RELEASE = 1.1
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+ 
+sg_lib.lo: sg_lib.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_lib.c
+
+sg_cmds_basic.lo: sg_cmds_basic.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_cmds_basic.c
+
+sg_cmds_extra.lo: sg_cmds_extra.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_cmds_extra.c
+
+sg_pt_freebsd.lo: sg_pt_freebsd.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_pt_freebsd.c
+
+libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_freebsd.lo
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o libsgutils.la sg_lib.lo \
+	sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_freebsd.lo -rpath $(LIBDIR) \
+	-version-info $(LIB_VINFO)
+
+# libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo
+#	$(LIBTOOL) --mode=link $(LD) -o libsgutils.la sg_lib.lo \
+#	sg_cmds_basic.lo sg_cmds_extra.lo -rpath $(LIBDIR) -release $(RELEASE)
+
+sg_readcap: sg_readcap.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_turs: sg_turs.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_inq: sg_inq.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_start: sg_start.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_modes: sg_modes.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_logs: sg_logs.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_senddiag: sg_senddiag.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_persist: sg_persist.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_requests: sg_requests.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_ses: sg_ses.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_luns: sg_luns.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_sync: sg_sync.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_prevent: sg_prevent.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_get_config: sg_get_config.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_wr_mode: sg_wr_mode.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_rtpg: sg_rtpg.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_reassign: sg_reassign.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_format: sg_format.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_rmsn: sg_rmsn.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_ident: sg_ident.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_read_long: sg_read_long.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_write_long: sg_write_long.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_verify: sg_verify.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_rdac: sg_rdac.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o libsgutils.la
+
+sg_sat_identify: sg_sat_identify.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_read_buffer: sg_read_buffer.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_write_buffer: sg_write_buffer.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_opcodes: sg_opcodes.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_raw: sg_raw.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	install -d $(LIBDIR)
+	$(LIBTOOL) --mode=install $(LT_EXTRA) install -c libsgutils.la $(LIBDIR)/libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --finish $(LIBDIR)
+	for name in $(EXECS); \
+	 do $(LIBTOOL) $(LT_EXTRA) --mode=install install -m 755 \
+		$$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+	install -d $(INCLUDEDIR)/scsi
+	for hdr in $(HEADERS); \
+	 do install -m 644 $$hdr $(INCLUDEDIR)/scsi ; \
+	done
+
+uninstall:
+	$(LIBTOOL) $(LT_EXTRA) --mode=uninstall rm -f $(LIBDIR)/libsgutils.la
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+	for hdr in $(HEADERS); do \
+	 rm -f $(INCLUDEDIR)/scsi/$$hdr ; \
+	done
+
diff --git a/archive/pre_configure/Makefile.mingw b/archive/pre_configure/Makefile.mingw
new file mode 100644
index 00000000..9b4e240b
--- /dev/null
+++ b/archive/pre_configure/Makefile.mingw
@@ -0,0 +1,145 @@
+# Assumes makefile is used in a MSYS shell with a MinGW compiler available.
+
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(PREFIX)/bin
+MANDIR=$(PREFIX)/man
+
+CC = gcc
+LD = gcc
+
+EXECS =	sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs sg_senddiag \
+	sg_persist sg_requests sg_ses sg_luns sg_scan \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+EXE_S =	sg_readcap.exe sg_turs.exe sg_inq.exe sg_start.exe sg_modes.exe \
+	sg_logs.exe sg_senddiag.exe sg_persist.exe sg_requests.exe \
+	sg_ses.exe sg_luns.exe sg_scan.exe sg_sync.exe sg_prevent.exe \
+	sg_get_config.exe sg_wr_mode.exe sg_rtpg.exe sg_reassign.exe \
+	sg_format.exe sg_rmsn.exe sg_ident.exe sg_read_long.exe \
+	sg_write_long.exe sg_verify.exe sg_rdac.exe sg_vpd.exe \
+	sg_sat_identify.exe sg_read_buffer.exe sg_write_buffer.exe \
+	sg_opcodes.exe sg_raw.exe
+
+OS_FLAGS = -DSG3_UTILS_WIN32 -DSG3_UTILS_MINGW -DSPTD
+# OS_FLAGS = -DSG3_UTILS_WIN32 -DSG3_UTILS_MINGW
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+EXTRA_FLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(EXTRA_FLAGS)
+CFLAGS = -g -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(EXTRA_FLAGS)
+
+O_FILES = sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_win32.o
+O_BFILES = sg_lib.o sg_cmds_basic.o sg_pt_win32.o
+O_RFILES = sg_lib.o sg_pt_win32.o
+O_SFILES = sg_lib.o
+
+LDFLAGS = 
+
+all: $(EXECS)
+
+clean:
+	rm *.o $(EXE_S)
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+
+sg_readcap: sg_readcap.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_turs: sg_turs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_inq: sg_inq.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_start: sg_start.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_modes: sg_modes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_logs: sg_logs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_senddiag: sg_senddiag.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_persist: sg_persist.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_requests: sg_requests.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_ses: sg_ses.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_luns: sg_luns.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_scan: sg_scan.o $(O_SFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_SFILES)
+
+sg_sync: sg_sync.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_prevent: sg_prevent.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_get_config: sg_get_config.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_wr_mode: sg_wr_mode.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_rtpg: sg_rtpg.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_reassign: sg_reassign.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_format: sg_format.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rmsn: sg_rmsn.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_ident: sg_ident.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_long: sg_read_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_long: sg_write_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_verify: sg_verify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rdac: sg_rdac.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o $(O_BFILES)
+
+sg_sat_identify: sg_sat_identify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_buffer: sg_read_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_buffer: sg_write_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_opcodes: sg_opcodes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_raw: sg_raw.o $(O_RFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_RFILES)
+
diff --git a/archive/pre_configure/Makefile.osf1 b/archive/pre_configure/Makefile.osf1
new file mode 100644
index 00000000..13a7066a
--- /dev/null
+++ b/archive/pre_configure/Makefile.osf1
@@ -0,0 +1,207 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+LIBDIR=$(DESTDIR)/$(PREFIX)/lib
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/man
+INCLUDEDIR=$(DESTDIR)/$(PREFIX)/include
+
+CC = cc
+LD = cc
+# LIBTOOL = libtool15
+LIBTOOL = libtool
+
+EXECS = sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs \
+	sg_senddiag sg_persist sg_requests sg_ses sg_luns \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+
+MAN_PREF = man8
+
+HEADERS = sg_lib.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_pt.h
+
+OS_FLAGS = -DSG3_UTILS_OSF1
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+S_CFLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W
+CFLAGS = -g -I./getopt_long
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99
+
+CFLAGS_PTHREADS = -pthread
+
+LDFLAGS =
+# LDFLAGS = -v -lm
+
+LIB_VINFO = 1:0:0
+# Perhaps should use "-release RELEASE" instead
+# RELEASE = 1.1
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -f getopt_long/*.o
+	/bin/rm -rf .libs
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+ 
+sg_lib.lo: sg_lib.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_lib.c
+
+sg_cmds_basic.lo: sg_cmds_basic.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_cmds_basic.c
+
+sg_cmds_extra.lo: sg_cmds_extra.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_cmds_extra.c
+
+sg_pt_osf1.lo: sg_pt_osf1.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_pt_osf1.c
+
+libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_osf1.lo
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o libsgutils.la sg_lib.lo \
+	sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_osf1.lo -rpath $(LIBDIR) \
+	-version-info $(LIB_VINFO)
+
+# libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo
+#	$(LIBTOOL) --mode=link $(LD) -o libsgutils.la sg_lib.lo
+#	 sg_cmds_basic.lo sg_cmds_extra.lo -rpath $(LIBDIR) -release $(RELEASE)
+
+sg_readcap: sg_readcap.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_turs: sg_turs.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_inq: sg_inq.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_start: sg_start.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_modes: sg_modes.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_logs: sg_logs.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_senddiag: sg_senddiag.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_persist: sg_persist.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_requests: sg_requests.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_ses: sg_ses.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_luns: sg_luns.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_sync: sg_sync.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_prevent: sg_prevent.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_get_config: sg_get_config.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_wr_mode: sg_wr_mode.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_rtpg: sg_rtpg.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_reassign: sg_reassign.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_format: sg_format.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_rmsn: sg_rmsn.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_ident: sg_ident.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_read_long: sg_read_long.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_write_long: sg_write_long.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_verify: sg_verify.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_rdac: sg_rdac.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o libsgutils.la getopt_long/getopt_long.o
+
+sg_sat_identify: sg_sat_identify.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_read_buffer: sg_read_buffer.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_write_buffer: sg_write_buffer.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_opcodes: sg_opcodes.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+sg_raw: sg_raw.o libsgutils.la getopt_long/getopt_long.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la getopt_long/getopt_long.o
+
+install: $(EXECS)
+	test -d $(INSTDIR) || mkdir -p $(INSTDIR)
+	test -d $(LIBDIR) || mkdir -p $(LIBDIR)
+	$(LIBTOOL) --mode=install $(LT_EXTRA) installbsd -c libsgutils.la $(LIBDIR)
+	$(LIBTOOL) $(LT_EXTRA) --finish $(LIBDIR)
+	for name in $(EXECS); \
+	 do $(LIBTOOL) $(LT_EXTRA) --mode=install installbsd -c -m 755 \
+		$$name $(INSTDIR); \
+	done
+	test -d $(MANDIR)/$(MAN_PREF) || mkdir -p $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do installbsd -c -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+	test -d $(INCLUDEDIR)/scsi || mkdir -p $(INCLUDEDIR)/scsi
+	for hdr in $(HEADERS); \
+	 do installbsd -c -m 644 $$hdr $(INCLUDEDIR)/scsi ; \
+	done
+
+uninstall:
+	$(LIBTOOL) $(LT_EXTRA) --mode=uninstall rm -f $(LIBDIR)/libsgutils.la
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+	for hdr in $(HEADERS); do \
+	 rm -f $(INCLUDEDIR)/scsi/$$hdr ; \
+	done
+
diff --git a/archive/pre_configure/Makefile.solaris b/archive/pre_configure/Makefile.solaris
new file mode 100644
index 00000000..408e4500
--- /dev/null
+++ b/archive/pre_configure/Makefile.solaris
@@ -0,0 +1,205 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+LIBDIR=$(DESTDIR)/$(PREFIX)/lib
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/man
+INCLUDEDIR=$(DESTDIR)/$(PREFIX)/include
+
+CC = gcc
+LD = gcc
+# LIBTOOL = libtool15
+LIBTOOL = libtool
+LT_EXTRA = --tag=junk
+
+EXECS = sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs \
+	sg_senddiag sg_persist sg_requests sg_ses sg_luns \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+MAN_PREF = man8
+
+HEADERS = sg_lib.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_pt.h
+
+OS_FLAGS = -DSG3_UTILS_SOLARIS
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+S_CFLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W
+CFLAGS = -g -O2 -Wall -W
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99
+
+CFLAGS_PTHREADS = -D_REENTRANT
+
+# LDFLAGS = -lcam 
+# LDFLAGS = -v -lm
+
+LIB_VINFO = 1:0:0
+# Perhaps should use "-release RELEASE" instead
+# RELEASE = 1.1
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+ 
+sg_lib.lo: sg_lib.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_lib.c
+
+sg_cmds_basic.lo: sg_cmds_basic.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_cmds_basic.c
+
+sg_cmds_extra.lo: sg_cmds_extra.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_cmds_extra.c
+
+sg_pt_solaris.lo: sg_pt_solaris.o
+	$(LIBTOOL) $(LT_EXTRA) --mode=compile $(CC) -c sg_pt_solaris.c
+
+libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_solaris.lo
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o libsgutils.la sg_lib.lo \
+	sg_cmds_basic.lo sg_cmds_extra.lo sg_pt_solaris.lo -rpath $(LIBDIR) \
+	-version-info $(LIB_VINFO)
+
+# libsgutils.la: sg_lib.lo sg_cmds_basic.lo sg_cmds_extra.lo
+#	$(LIBTOOL) --mode=link $(LD) -o libsgutils.la sg_lib.lo \
+#	sg_cmds_basic.lo sg_cmds_extra.lo -rpath $(LIBDIR) -release $(RELEASE)
+
+sg_readcap: sg_readcap.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_turs: sg_turs.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_inq: sg_inq.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_start: sg_start.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_modes: sg_modes.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_logs: sg_logs.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_senddiag: sg_senddiag.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_persist: sg_persist.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_requests: sg_requests.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_ses: sg_ses.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_luns: sg_luns.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_sync: sg_sync.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_prevent: sg_prevent.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_get_config: sg_get_config.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_wr_mode: sg_wr_mode.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_rtpg: sg_rtpg.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_reassign: sg_reassign.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_format: sg_format.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_rmsn: sg_rmsn.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_ident: sg_ident.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_read_long: sg_read_long.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_write_long: sg_write_long.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_verify: sg_verify.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_rdac: sg_rdac.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o libsgutils.la
+
+sg_sat_identify: sg_sat_identify.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_read_buffer: sg_read_buffer.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_write_buffer: sg_write_buffer.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_opcodes: sg_opcodes.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+sg_raw: sg_raw.o libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --mode=link $(LD) -o $@ $(LDFLAGS) $@.o libsgutils.la
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	install -d $(LIBDIR)
+	$(LIBTOOL) --mode=install $(LT_EXTRA) install -c libsgutils.la $(LIBDIR)/libsgutils.la
+	$(LIBTOOL) $(LT_EXTRA) --finish $(LIBDIR)
+	for name in $(EXECS); \
+	 do $(LIBTOOL) $(LT_EXTRA) --mode=install install -m 755 \
+		-f $(INSTDIR) $$name; \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -s -m 644 -f $(MANDIR)/$(MAN_PREF) $$mp; \
+	done
+#	install -d $(INCLUDEDIR)/scsi
+#	for hdr in $(HEADERS); \
+#	 do install -m 644 $$hdr $(INCLUDEDIR)/scsi ; \
+#	done
+
+uninstall:
+	$(LIBTOOL) $(LT_EXTRA) --mode=uninstall rm -f $(LIBDIR)/libsgutils.la
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+#	for hdr in $(HEADERS); do \
+#	 rm -f $(INCLUDEDIR)/scsi/$$hdr ; \
+#	done
+
diff --git a/archive/pre_configure/Makefile.win32 b/archive/pre_configure/Makefile.win32
new file mode 100644
index 00000000..a3708461
--- /dev/null
+++ b/archive/pre_configure/Makefile.win32
@@ -0,0 +1,179 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(PREFIX)/bin
+MANDIR=$(PREFIX)/man
+
+CC = gcc
+LD = gcc
+
+EXECS =	sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs sg_senddiag \
+	sg_persist sg_requests sg_ses sg_luns sg_scan \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+EXE_S =	sg_readcap.exe sg_turs.exe sg_inq.exe sg_start.exe sg_modes.exe \
+	sg_logs.exe sg_senddiag.exe sg_persist.exe sg_requests.exe \
+	sg_ses.exe sg_luns.exe sg_scan.exe sg_sync.exe sg_prevent.exe \
+	sg_get_config.exe sg_wr_mode.exe sg_rtpg.exe sg_reassign.exe \
+	sg_format.exe sg_rmsn.exe sg_ident.exe sg_read_long.exe \
+	sg_write_long.exe sg_verify.exe sg_rdac.exe sg_vpd.exe \
+	sg_sat_identify.exe sg_read_buffer.exe sg_write_buffer.exe \
+	sg_opcodes.exe sg_raw.exe
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_scan.8 sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+
+MAN_PREF = man8
+
+OS_FLAGS = -DSG3_UTILS_WIN32 -DSPTD
+# OS_FLAGS = -DSG3_UTILS_WIN32
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+EXTRA_FLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(EXTRA_FLAGS)
+CFLAGS = -g -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(EXTRA_FLAGS)
+
+O_FILES = sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_win32.o
+O_BFILES = sg_lib.o sg_cmds_basic.o sg_pt_win32.o
+O_RFILES = sg_lib.o sg_pt_win32.o
+O_SFILES = sg_lib.o
+
+LDFLAGS = 
+
+all: $(EXECS)
+	cp sg_scan.8w sg_scan.8
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXE_S) core* .depend *.a
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+
+sg_readcap: sg_readcap.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_turs: sg_turs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_inq: sg_inq.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_start: sg_start.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_modes: sg_modes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_logs: sg_logs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_senddiag: sg_senddiag.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_persist: sg_persist.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_requests: sg_requests.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_ses: sg_ses.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_luns: sg_luns.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_scan: sg_scan.o $(O_SFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_SFILES)
+
+sg_sync: sg_sync.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_prevent: sg_prevent.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_get_config: sg_get_config.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_wr_mode: sg_wr_mode.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_rtpg: sg_rtpg.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_reassign: sg_reassign.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_format: sg_format.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rmsn: sg_rmsn.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_ident: sg_ident.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_long: sg_read_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_long: sg_write_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_verify: sg_verify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rdac: sg_rdac.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o $(O_BFILES)
+
+sg_sat_identify: sg_sat_identify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_buffer: sg_read_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_buffer: sg_write_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_opcodes: sg_opcodes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_raw: sg_raw.o $(O_RFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_RFILES)
+
+install: $(EXECS)
+	cp sg_scan.8w sg_scan.8
+	install -d $(INSTDIR)
+	for name in $(EXECS); \
+	 do install -s -m 755 $$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+
+uninstall:
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+
diff --git a/archive/pre_configure/README b/archive/pre_configure/README
new file mode 100644
index 00000000..1585e48d
--- /dev/null
+++ b/archive/pre_configure/README
@@ -0,0 +1,22 @@
+The contents of this "pre_configure" subdirectory are the hand-crafted
+Makefiles and associated scripts that were used prior to their replacment
+by the autotools based logic. The autotools suite is associated with the
+build sequence: "./configure ; make ; make install" that many users are
+coming to expect. While it might be easier for users (especially on
+lesser used architectures) autotools is a pain to setup. It can also
+be sensitive to which versions of build tools (e.g. autoconf and automake)
+are being used.
+
+Hence the old hand-crafted Makefiles and associated scripts are archived
+in this directory. They represent the state of the build system during
+the development of sg3_utils version 1.25 . This older build system
+won't be maintained past this point and is put here for reference and
+may be helpful if autotools breaks down (or at least they may show the
+author's intentions).
+
+Note that various other subdirectories (e.g. utils and examples) still
+use hand-crafted Makefiles.
+
+Douglas Gilbert
+18th July 2007
+
diff --git a/archive/pre_configure/debian_rules b/archive/pre_configure/debian_rules
new file mode 100755
index 00000000..b873367b
--- /dev/null
+++ b/archive/pre_configure/debian_rules
@@ -0,0 +1,80 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper. 
+# GNU copyright 1997 by Joey Hess.
+#
+# This version is for a hypothetical package that builds an
+# architecture-dependant package, as well as an architecture-independent
+# package.
+
+# Uncomment this to turn on verbose mode. 
+# export DH_VERBOSE=1
+
+# Debhelper compatibility level
+export DH_COMPAT=4
+
+configure: configure-stamp
+configure-stamp:
+	dh_testdir
+	# Add here commands to configure the package.
+	touch configure-stamp
+
+build: configure-stamp build-stamp
+build-stamp:
+	dh_testdir
+
+	# Add here commands to compile the package.
+	PREFIX=/usr MANDIR=/usr/share/man $(MAKE) -e
+
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+
+	# Add here commands to clean up after the build process.
+	-$(MAKE) clean
+
+	rm -f build-stamp configure-stamp debian/substvars
+
+	dh_clean
+
+install: DH_OPTIONS=
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	# Add here commands to install the package into debian/tmp
+	$(MAKE) -e install DESTDIR=$(CURDIR)/debian/tmp PREFIX=/usr
+
+	find debian/tmp/usr/bin debian/tmp/usr/lib -type f -exec chrpath -d {} \;
+	dh_install --autodest --sourcedir=debian/tmp
+	dh_installman
+
+# Build architecture-independent files here.
+# Pass -i to all debhelper commands in this target to reduce clutter.
+binary-indep: build install
+# nothing to do here
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir -a
+	dh_testroot -a
+	dh_installdocs -a
+	dh_installexamples -a 
+	dh_installmenu -a
+	dh_installchangelogs CHANGELOG -a
+	dh_strip -a
+	dh_link -a
+	dh_compress -a -X archive -X .c -X .h
+	dh_fixperms -a
+	dh_makeshlibs -V -v
+	dh_installdeb -a
+	dh_shlibdeps -ldebian/tmp/usr/lib -L libsgutils1
+	dh_gencontrol -a
+	dh_md5sums -a
+	dh_builddeb -a
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
diff --git a/archive/pre_configure/make_no_lib.sh b/archive/pre_configure/make_no_lib.sh
new file mode 100755
index 00000000..a63c04e9
--- /dev/null
+++ b/archive/pre_configure/make_no_lib.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+make -f no_lib/Makefile.linux $@
diff --git a/archive/pre_configure/make_no_lib_freebsd.sh b/archive/pre_configure/make_no_lib_freebsd.sh
new file mode 100755
index 00000000..49d7ae28
--- /dev/null
+++ b/archive/pre_configure/make_no_lib_freebsd.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+make -f no_lib/Makefile.freebsd $@
diff --git a/archive/pre_configure/make_no_lib_osf1.sh b/archive/pre_configure/make_no_lib_osf1.sh
new file mode 100755
index 00000000..ee6a97eb
--- /dev/null
+++ b/archive/pre_configure/make_no_lib_osf1.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+make -f no_lib/Makefile.osf1 $@
diff --git a/archive/pre_configure/make_no_lib_solaris.sh b/archive/pre_configure/make_no_lib_solaris.sh
new file mode 100755
index 00000000..bf0aeff6
--- /dev/null
+++ b/archive/pre_configure/make_no_lib_solaris.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+make -f no_lib/Makefile.solaris $@
diff --git a/archive/pre_configure/make_no_lib_static.sh b/archive/pre_configure/make_no_lib_static.sh
new file mode 100755
index 00000000..5cac9b23
--- /dev/null
+++ b/archive/pre_configure/make_no_lib_static.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+make -f no_lib/Makefile.linux_static $@
diff --git a/archive/pre_configure/make_no_lib_win32.sh b/archive/pre_configure/make_no_lib_win32.sh
new file mode 100755
index 00000000..24f6953a
--- /dev/null
+++ b/archive/pre_configure/make_no_lib_win32.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+make -f no_lib/Makefile.win32 $@
diff --git a/archive/pre_configure/no_lib/Makefile.freebsd b/archive/pre_configure/no_lib/Makefile.freebsd
new file mode 100644
index 00000000..c2de140e
--- /dev/null
+++ b/archive/pre_configure/no_lib/Makefile.freebsd
@@ -0,0 +1,162 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/man
+
+CC = gcc
+LD = gcc
+
+EXECS = sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs sg_senddiag \
+	sg_persist sg_requests sg_ses sg_luns \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+
+MAN_PREF = man8
+
+OS_FLAGS = -DSG3_UTILS_FREEBSD
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+EXTRA_FLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(EXTRA_FLAGS)
+CFLAGS = -g -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(EXTRA_FLAGS)
+
+O_FILES = sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_freebsd.o
+O_BFILES = sg_lib.o sg_cmds_basic.o sg_pt_freebsd.o
+O_RFILES = sg_lib.o sg_pt_freebsd.o
+
+LDFLAGS = -lcam
+# LDFLAGS = -v -lm
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+sg_readcap: sg_readcap.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_turs: sg_turs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_inq: sg_inq.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_start: sg_start.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_modes: sg_modes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_logs: sg_logs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_senddiag: sg_senddiag.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_persist: sg_persist.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_requests: sg_requests.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_ses: sg_ses.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_luns: sg_luns.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_sync: sg_sync.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_prevent: sg_prevent.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_get_config: sg_get_config.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_wr_mode: sg_wr_mode.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_rtpg: sg_rtpg.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_reassign: sg_reassign.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_format: sg_format.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rmsn: sg_rmsn.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_ident: sg_ident.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_long: sg_read_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_long: sg_write_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_verify: sg_verify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rdac: sg_rdac.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o $(O_BFILES)
+
+sg_sat_identify: sg_sat_identify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_buffer: sg_read_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_buffer: sg_write_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_opcodes: sg_opcodes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_raw: sg_raw.o $(O_RFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_RFILES)
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	for name in $(EXECS); \
+	 do install -s -m 755 $$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+
+uninstall:
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+
diff --git a/archive/pre_configure/no_lib/Makefile.linux b/archive/pre_configure/no_lib/Makefile.linux
new file mode 100644
index 00000000..b07df7db
--- /dev/null
+++ b/archive/pre_configure/no_lib/Makefile.linux
@@ -0,0 +1,208 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/share/man
+
+ifndef CC
+CC = gcc
+endif
+LD = $(CC)
+
+EXECS = sg_dd sgp_dd sgm_dd sg_read sg_map sg_scan sg_rbuf \
+	sginfo sg_readcap sg_turs sg_inq sg_test_rwbuf \
+	sg_start sg_reset sg_modes sg_logs sg_senddiag sg_opcodes \
+	sg_persist sg_write_long sg_read_long sg_requests sg_ses \
+	sg_verify sg_emc_trespass sg_luns sg_sync sg_prevent \
+	sg_get_config sg_wr_mode sg_rtpg sg_reassign sg_format \
+	sg_rmsn sg_ident sg_map26 sg_rdac sg_vpd sg_sat_identify \
+	sg_read_buffer sg_write_buffer sg_raw
+
+MAN_PGS = sg_dd.8 sgp_dd.8 sgm_dd.8 sg_read.8 sg_map.8 sg_scan.8 sg_rbuf.8 \
+	sginfo.8 sg_readcap.8 sg_turs.8 sg_inq.8 sg_test_rwbuf.8 \
+	sg_start.8 sg_reset.8 sg_modes.8 sg_logs.8 sg_senddiag.8 \
+	sg_opcodes.8 sg_persist.8 sg_write_long.8 sg_read_long.8 \
+	sg_requests.8 sg_ses.8 sg_verify.8 sg_emc_trespass.8 \
+	sg_luns.8 sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	sg_map26.8 sg_rdac.8 sg_vpd.8 sg3_utils.8 sg_sat_identify.8 \
+	sg_read_buffer.8 sg_write_buffer.8 sg_raw.8
+MAN_PREF = man8
+
+OS_FLAGS = -DSG3_UTILS_LINUX
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+EXTRA_FLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -W -DSG_KERNEL_INCLUDES $(EXTRA_FLAGS)
+CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=gnu++98 $(EXTRA_FLAGS)
+
+CFLAGS_PTHREADS = -D_REENTRANT
+
+LDFLAGS = 
+# LDFLAGS = -v -lm
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+sg_dd: sg_dd.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_scan: sg_scan.o sg_io_linux.o sg_lib.o
+	$(LD) -o $@ $(LDFLAGS) $^ 
+
+sginfo: sginfo.o sg_io_linux.o sg_lib.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_start: sg_start.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^ 
+
+sg_rbuf: sg_rbuf.o sg_lib.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_readcap: sg_readcap.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sgp_dd.o: sgp_dd.c
+	$(CC) $(INCLUDES) $(CFLAGS) $(CFLAGS_PTHREADS) -c $<
+
+sgp_dd: sgp_dd.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^ -lpthread
+
+sgm_dd: sgm_dd.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_map: sg_map.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_turs: sg_turs.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_test_rwbuf: sg_test_rwbuf.o sg_lib.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_inq: sg_inq.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_read: sg_read.o sg_lib.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_reset: sg_reset.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_modes: sg_modes.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_logs: sg_logs.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_senddiag: sg_senddiag.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_opcodes: sg_opcodes.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_persist: sg_persist.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_long: sg_write_long.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_long: sg_read_long.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_requests: sg_requests.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_ses: sg_ses.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_verify: sg_verify.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_emc_trespass: sg_emc_trespass.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_luns: sg_luns.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_sync: sg_sync.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_prevent: sg_prevent.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_get_config: sg_get_config.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_wr_mode: sg_wr_mode.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_rtpg: sg_rtpg.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_reassign: sg_reassign.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_format: sg_format.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_rmsn: sg_rmsn.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_ident: sg_ident.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_map26: sg_map26.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_rdac: sg_rdac.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_sat_identify: sg_sat_identify.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_buffer: sg_read_buffer.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_buffer: sg_write_buffer.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_raw: sg_raw.o sg_lib.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	for name in $^; \
+	 do install -s -o root -g root -m 755 $$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -o root -g root -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+
+uninstall:
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+
+ifeq (.depend,$(wildcard .depend))
+include .depend
+endif
diff --git a/archive/pre_configure/no_lib/Makefile.linux_static b/archive/pre_configure/no_lib/Makefile.linux_static
new file mode 100644
index 00000000..12ad5172
--- /dev/null
+++ b/archive/pre_configure/no_lib/Makefile.linux_static
@@ -0,0 +1,207 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/share/man
+
+ifndef CC
+CC = gcc
+endif
+LD = $(CC)
+
+EXECS = sg_dd sgp_dd sgm_dd sg_read sg_map sg_scan sg_rbuf \
+	sginfo sg_readcap sg_turs sg_inq sg_test_rwbuf \
+	sg_start sg_reset sg_modes sg_logs sg_senddiag sg_opcodes \
+	sg_persist sg_write_long sg_read_long sg_requests sg_ses \
+	sg_verify sg_emc_trespass sg_luns sg_sync sg_prevent \
+	sg_get_config sg_wr_mode sg_rtpg sg_reassign sg_format \
+	sg_rmsn sg_ident sg_map26 sg_rdac sg_vpd sg_sat_identify \
+	sg_read_buffer sg_write_buffer sg_raw
+
+MAN_PGS = sg_dd.8 sgp_dd.8 sgm_dd.8 sg_read.8 sg_map.8 sg_scan.8 sg_rbuf.8 \
+	sginfo.8 sg_readcap.8 sg_turs.8 sg_inq.8 sg_test_rwbuf.8 \
+	sg_start.8 sg_reset.8 sg_modes.8 sg_logs.8 sg_senddiag.8 \
+	sg_opcodes.8 sg_persist.8 sg_write_long.8 sg_read_long.8 \
+	sg_requests.8 sg_ses.8 sg_verify.8 sg_emc_trespass.8 \
+	sg_luns.8 sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	sg_map26.8 sg_rdac.8 sg_vpd.8 sg3_utils.8 sg_sat_identify.8 \
+	sg_read_buffer.8 sg_write_buffer.8 sg_raw.8
+MAN_PREF = man8
+
+OS_FLAGS = -DSG3_UTILS_LINUX
+###  LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+EXTRA_FLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(EXTRA_FLAGS)
+CFLAGS = -g -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -W -DSG_KERNEL_INCLUDES $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(EXTRA_FLAGS)
+
+CFLAGS_PTHREADS = -D_REENTRANT
+
+LDFLAGS = -static 
+# LDFLAGS = -v -lm
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+sg_dd: sg_dd.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_scan: sg_scan.o sg_io_linux.o sg_lib.o
+	$(LD) -o $@ $(LDFLAGS) $^ 
+
+sginfo: sginfo.o sg_io_linux.o sg_lib.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_start: sg_start.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^ 
+
+sg_rbuf: sg_rbuf.o sg_lib.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_readcap: sg_readcap.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sgp_dd.o: sgp_dd.c
+	$(CC) $(INCLUDES) $(CFLAGS) $(CFLAGS_PTHREADS) -c $<
+
+sgp_dd: sgp_dd.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^ -lpthread
+
+sgm_dd: sgm_dd.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_map: sg_map.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_turs: sg_turs.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_test_rwbuf: sg_test_rwbuf.o sg_lib.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_inq: sg_inq.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_read: sg_read.o sg_lib.o sg_io_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_reset: sg_reset.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_modes: sg_modes.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_logs: sg_logs.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_senddiag: sg_senddiag.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_opcodes: sg_opcodes.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_persist: sg_persist.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_long: sg_write_long.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_long: sg_read_long.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_requests: sg_requests.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_ses: sg_ses.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_verify: sg_verify.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_emc_trespass: sg_emc_trespass.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_luns: sg_luns.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_sync: sg_sync.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_prevent: sg_prevent.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_get_config: sg_get_config.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_wr_mode: sg_wr_mode.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_rtpg: sg_rtpg.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_reassign: sg_reassign.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_format: sg_format.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_rmsn: sg_rmsn.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_ident: sg_ident.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_map26: sg_map26.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_rdac: sg_rdac.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o sg_lib.o sg_cmds_basic.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_sat_identify: sg_sat_identify.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_read_buffer: sg_read_buffer.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_write_buffer: sg_write_buffer.o sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+sg_raw: sg_raw.o sg_lib.o sg_pt_linux.o
+	$(LD) -o $@ $(LDFLAGS) $^
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	for name in $^; \
+	 do install -s -o root -g root -m 755 $$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -o root -g root -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+
+uninstall:
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+
+ifeq (.depend,$(wildcard .depend))
+include .depend
+endif
diff --git a/archive/pre_configure/no_lib/Makefile.osf1 b/archive/pre_configure/no_lib/Makefile.osf1
new file mode 100644
index 00000000..9fdeeb33
--- /dev/null
+++ b/archive/pre_configure/no_lib/Makefile.osf1
@@ -0,0 +1,167 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/man
+
+CC = cc
+LD = cc
+
+EXECS = sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs sg_senddiag \
+	sg_persist sg_requests sg_ses sg_luns \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+
+MAN_PREF = man8
+
+OS_FLAGS = -DSG3_UTILS_OSF1
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+S_CFLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(S_CFLAGS)
+CFLAGS = -g -I./getopt_long $(S_CFLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(S_CFLAGS)
+
+O_FILES = sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_osf1.o
+O_BFILES = sg_lib.o sg_cmds_basic.o sg_pt_osf1.o
+O_RFILES = sg_lib.o sg_pt_osf1.o
+O_GETOPT_LONG = getopt_long/getopt_long.o
+
+LDFLAGS =
+# LDFLAGS = -v -lm
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -f $(O_GETOPT_LONG)
+	/bin/rm -rf .libs
+
+.c.o:
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+sg_readcap: sg_readcap.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_turs: sg_turs.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_inq: sg_inq.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_start: sg_start.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_modes: sg_modes.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_logs: sg_logs.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_senddiag: sg_senddiag.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_persist: sg_persist.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_requests: sg_requests.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_ses: sg_ses.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_luns: sg_luns.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_sync: sg_sync.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_prevent: sg_prevent.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_get_config: sg_get_config.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_wr_mode: sg_wr_mode.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_rtpg: sg_rtpg.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_reassign: sg_reassign.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_format: sg_format.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_rmsn: sg_rmsn.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_ident: sg_ident.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_read_long: sg_read_long.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_write_long: sg_write_long.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_verify: sg_verify.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_rdac: sg_rdac.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_vpd: sg_vpd.o  sg_vpd_vendor.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_sat_identify: sg_sat_identify.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_read_buffer: sg_read_buffer.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_write_buffer: sg_write_buffer.o $(O_FILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES) $(O_GETOPT_LONG)
+
+sg_opcodes: sg_opcodes.o $(O_BFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES) $(O_GETOPT_LONG)
+
+sg_raw: sg_raw.o $(O_RFILES) $(O_GETOPT_LONG)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_RFILES) $(O_GETOPT_LONG)
+
+install: $(EXECS)
+	test -d $(INSTDIR) || mkdir -p $(INSTDIR)
+	for name in $(EXECS); \
+	 do installbsd -c -s -m 755 $$name $(INSTDIR); \
+	done
+	test -d $(MANDIR)/$(MAN_PREF) || mkdir -p $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do installbsd -c -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+
+uninstall:
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+
diff --git a/archive/pre_configure/no_lib/Makefile.solaris b/archive/pre_configure/no_lib/Makefile.solaris
new file mode 100644
index 00000000..089617ed
--- /dev/null
+++ b/archive/pre_configure/no_lib/Makefile.solaris
@@ -0,0 +1,161 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(DESTDIR)/$(PREFIX)/bin
+MANDIR=$(DESTDIR)/$(PREFIX)/man
+
+CC = gcc
+LD = gcc
+
+EXECS = sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs sg_senddiag \
+	sg_persist sg_requests sg_ses sg_luns \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+
+MAN_PREF = man8
+
+OS_FLAGS = -DSG3_UTILS_SOLARIS
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+EXTRA_FLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(EXTRA_FLAGS)
+CFLAGS = -g -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(EXTRA_FLAGS)
+
+O_FILES = sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_solaris.o
+O_BFILES = sg_lib.o sg_cmds_basic.o sg_pt_solaris.o
+O_RFILES = sg_lib.o sg_pt_solaris.o
+
+# LDFLAGS = -lcam
+# LDFLAGS = -v -lm
+
+all: $(EXECS)
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+sg_readcap: sg_readcap.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_turs: sg_turs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_inq: sg_inq.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_start: sg_start.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_modes: sg_modes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_logs: sg_logs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_senddiag: sg_senddiag.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_persist: sg_persist.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_requests: sg_requests.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_ses: sg_ses.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_luns: sg_luns.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_sync: sg_sync.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_prevent: sg_prevent.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_get_config: sg_get_config.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_wr_mode: sg_wr_mode.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_rtpg: sg_rtpg.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_reassign: sg_reassign.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_format: sg_format.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rmsn: sg_rmsn.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_ident: sg_ident.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_long: sg_read_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_long: sg_write_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_verify: sg_verify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rdac: sg_rdac.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o $(O_BFILES)
+
+sg_sat_identify: sg_sat_identify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_buffer: sg_read_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_buffer: sg_write_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_opcodes: sg_opcodes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_raw: sg_raw.o $(O_RFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_RFILES)
+
+install: $(EXECS)
+	install -d $(INSTDIR)
+	for name in $(EXECS); \
+	 do install -s -f $(INSTDIR) $$name; \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -s -m 644 -f $(MANDIR)/$(MAN_PREF) $$mp; \
+	done
+
+uninstall:
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+
diff --git a/archive/pre_configure/no_lib/Makefile.win32 b/archive/pre_configure/no_lib/Makefile.win32
new file mode 100644
index 00000000..9a621422
--- /dev/null
+++ b/archive/pre_configure/no_lib/Makefile.win32
@@ -0,0 +1,171 @@
+SHELL = /bin/sh
+
+PREFIX=/usr/local
+INSTDIR=$(PREFIX)/bin
+MANDIR=$(PREFIX)/man
+
+CC = gcc
+LD = gcc
+
+EXECS =	sg_readcap sg_turs sg_inq sg_start sg_modes sg_logs sg_senddiag \
+	sg_persist sg_requests sg_ses sg_luns sg_scan \
+	sg_sync sg_prevent sg_get_config sg_wr_mode \
+	sg_rtpg sg_reassign sg_format sg_rmsn sg_ident \
+	sg_read_long sg_write_long sg_verify sg_rdac sg_vpd \
+	sg_sat_identify sg_read_buffer sg_write_buffer sg_opcodes \
+	sg_raw
+
+MAN_PGS = sg_readcap.8 sg_turs.8 sg_inq.8 sg_start.8 sg_modes.8 sg_logs.8 \
+	  sg_senddiag.8 sg_persist.8 sg_requests.8 sg_ses.8 sg_luns.8 \
+	  sg_scan.8 sg_sync.8 sg_prevent.8 sg_get_config.8 sg_wr_mode.8 \
+	  sg_rtpg.8 sg_reassign.8 sg_format.8 sg_rmsn.8 sg_ident.8 \
+	  sg_read_long.8 sg_write_long.8 sg_verify.8 sg_rdac.8 sg_vpd.8 \
+	  sg3_utils.8 sg_sat_identify.8 sg_read_buffer.8 sg_write_buffer.8 \
+	  sg_opcodes.8 sg_raw.8
+
+MAN_PREF = man8
+
+OS_FLAGS = -DSG3_UTILS_WIN32 -DSPTD
+# OS_FLAGS = -DSG3_UTILS_WIN32
+LARGE_FILE_FLAGS = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+EXTRA_FLAGS = $(OS_FLAGS) $(LARGE_FILE_FLAGS)
+
+# CFLAGS = -O2 -Wall -W $(EXTRA_FLAGS)
+CFLAGS = -g -O2 -Wall -W $(EXTRA_FLAGS)
+# CFLAGS = -g -O2 -Wall -W -pedantic -std=c99 $(EXTRA_FLAGS)
+
+O_FILES = sg_lib.o sg_cmds_basic.o sg_cmds_extra.o sg_pt_win32.o
+O_BFILES = sg_lib.o sg_cmds_basic.o sg_pt_win32.o
+O_RFILES = sg_lib.o sg_pt_win32.o
+O_SFILES = sg_lib.o
+
+LDFLAGS = -static
+
+all: $(EXECS)
+	cp sg_scan.8w sg_scan.8
+
+depend dep:
+	for i in *.c; do $(CC) $(INCLUDES) $(CFLAGS) -M $$i; \
+	done > .depend
+
+clean:
+	/bin/rm -f *.o $(EXECS) core* .depend *.a *.la *.lo
+	/bin/rm -rf .libs
+
+.c.o:
+	$(CC) $(INCLUDES) $(CFLAGS) $(S_CFLAGS) -c -o $@ $<
+
+sg_readcap: sg_readcap.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_turs: sg_turs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_inq: sg_inq.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_start: sg_start.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_modes: sg_modes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_logs: sg_logs.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_senddiag: sg_senddiag.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_persist: sg_persist.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_requests: sg_requests.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_ses: sg_ses.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_luns: sg_luns.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_scan: sg_scan.o $(O_SFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_SFILES)
+
+sg_sync: sg_sync.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_prevent: sg_prevent.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_get_config: sg_get_config.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_wr_mode: sg_wr_mode.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_rtpg: sg_rtpg.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_reassign: sg_reassign.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_format: sg_format.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rmsn: sg_rmsn.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_ident: sg_ident.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_long: sg_read_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_long: sg_write_long.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_verify: sg_verify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_rdac: sg_rdac.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_vpd: sg_vpd.o sg_vpd_vendor.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o sg_vpd_vendor.o $(O_BFILES)
+
+sg_sat_identify: sg_sat_identify.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_read_buffer: sg_read_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_write_buffer: sg_write_buffer.o $(O_FILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_FILES)
+
+sg_opcodes: sg_opcodes.o $(O_BFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_BFILES)
+
+sg_raw: sg_raw.o $(O_RFILES)
+	$(LD) -o $@ $(LDFLAGS) $@.o $(O_RFILES)
+
+install: $(EXECS)
+	cp sg_scan.8w sg_scan.8
+	install -d $(INSTDIR)
+	for name in $(EXECS); \
+	 do install -s -m 755 $$name $(INSTDIR); \
+	done
+	install -d $(MANDIR)/$(MAN_PREF)
+	for mp in $(MAN_PGS); \
+	 do install -m 644 $$mp $(MANDIR)/$(MAN_PREF); \
+	 gzip -9f $(MANDIR)/$(MAN_PREF)/$$mp; \
+	done
+
+uninstall:
+	dists="$(EXECS)"; \
+	for name in $$dists; do \
+	 rm -f $(INSTDIR)/$$name; \
+	done
+	for mp in $(MAN_PGS); do \
+	 rm -f $(MANDIR)/$(MAN_PREF)/$$mp.gz; \
+	done
+
diff --git a/archive/pre_configure/no_lib/sg3_utils.spec b/archive/pre_configure/no_lib/sg3_utils.spec
new file mode 100644
index 00000000..58ceba0b
--- /dev/null
+++ b/archive/pre_configure/no_lib/sg3_utils.spec
@@ -0,0 +1,282 @@
+Summary: Utilities for devices that use SCSI command sets
+Name: sg3_utils
+Version: 1.25
+Release: 1
+Packager: Douglas Gilbert <dgilbert at interlog dot com>
+License: GPL/FreeBSD
+Group: Utilities/System
+Source: ftp://www.torque.net/sg/p/sg3_utils-%{version}.tgz
+Url: http://www.torque.net/sg/sg3_utils.html
+Provides: sg_utils
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root/
+
+%description
+Collection of Linux utilities for devices that use the SCSI command set.
+Includes utilities to copy data based on "dd" syntax and semantics (called
+sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
+mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
+disks (sg_start); do self tests (sg_senddiag); and various other functions.
+See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
+series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
+must be used. In the 2.6 series other device names may be used as
+well (e.g. /dev/sda).
+
+Warning: Some of these tools access the internals of your system and their
+incorrect usage may render your system inoperable.
+
+Authors:
+--------
+    Doug Gilbert <dgilbert at interlog dot com>
+    See CREDITS file
+
+%prep
+%setup
+
+%build
+make
+
+%install
+if [ "$RPM_BUILD_ROOT" != "/" ]; then
+        rm -rf $RPM_BUILD_ROOT
+fi
+make install INSTDIR=$RPM_BUILD_ROOT/usr/bin MANDIR=$RPM_BUILD_ROOT/usr/share/man
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%attr(-,root,root) %doc CREDITS README README.sg_start
+%attr(-,root,root) %doc CHANGELOG INSTALL COVERAGE COPYING
+%attr(755,root,root) %{_bindir}/sg_dd
+%attr(755,root,root) %{_bindir}/sg_inq
+%attr(755,root,root) %{_bindir}/sg_scan
+%attr(755,root,root) %{_bindir}/sg_rbuf
+%attr(755,root,root) %{_bindir}/sginfo
+%attr(755,root,root) %{_bindir}/sg_readcap
+%attr(755,root,root) %{_bindir}/sgp_dd
+%attr(755,root,root) %{_bindir}/sg_map
+%attr(755,root,root) %{_bindir}/sg_turs
+%attr(755,root,root) %{_bindir}/sg_test_rwbuf
+%attr(755,root,root) %{_bindir}/sg_start
+%attr(755,root,root) %{_bindir}/sgm_dd
+%attr(755,root,root) %{_bindir}/sg_read
+%attr(755,root,root) %{_bindir}/sg_reset
+%attr(755,root,root) %{_bindir}/sg_modes
+%attr(755,root,root) %{_bindir}/sg_logs
+%attr(755,root,root) %{_bindir}/sg_senddiag
+%attr(755,root,root) %{_bindir}/sg_opcodes
+%attr(755,root,root) %{_bindir}/sg_persist
+%attr(755,root,root) %{_bindir}/sg_write_long
+%attr(755,root,root) %{_bindir}/sg_read_long
+%attr(755,root,root) %{_bindir}/sg_requests
+%attr(755,root,root) %{_bindir}/sg_ses
+%attr(755,root,root) %{_bindir}/sg_verify
+%attr(755,root,root) %{_bindir}/sg_emc_trespass
+%attr(755,root,root) %{_bindir}/sg_luns
+%attr(755,root,root) %{_bindir}/sg_sync
+%attr(755,root,root) %{_bindir}/sg_prevent
+%attr(755,root,root) %{_bindir}/sg_get_config
+%attr(755,root,root) %{_bindir}/sg_wr_mode
+%attr(755,root,root) %{_bindir}/sg_rtpg
+%attr(755,root,root) %{_bindir}/sg_reassign
+%attr(755,root,root) %{_bindir}/sg_format
+%attr(755,root,root) %{_bindir}/sg_rmsn
+%attr(755,root,root) %{_bindir}/sg_ident
+%attr(755,root,root) %{_bindir}/sg_map26
+%attr(755,root,root) %{_bindir}/sg_vpd
+%attr(755,root,root) %{_bindir}/sg_rdac
+%attr(755,root,root) %{_bindir}/sg_sat_identify
+%attr(755,root,root) %{_bindir}/sg_read_buffer
+%attr(755,root,root) %{_bindir}/sg_write_buffer
+%attr(755,root,root) %{_bindir}/sg_raw
+# Mandrake compresses man pages with bzip2, RedHat with gzip
+%attr(-,root,root) %doc %{_mandir}/man8/sg_dd.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sgp_dd.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sgm_dd.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_read.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_map.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_scan.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_rbuf.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sginfo.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_readcap.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_turs.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_inq.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_test_rwbuf.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_start.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_reset.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_modes.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_logs.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_senddiag.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_opcodes.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_persist.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_write_long.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_read_long.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_requests.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_ses.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_verify.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_emc_trespass.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_luns.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_sync.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_prevent.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_get_config.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_wr_mode.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_rtpg.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_reassign.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_format.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_rmsn.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_ident.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_map26.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_vpd.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_rdac.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_sat_identify.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_read_buffer.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_write_buffer.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg_raw.8*
+%attr(-,root,root) %doc %{_mandir}/man8/sg3_utils.8*
+ 
+
+%changelog
+* Wed Jul 11 2007 - dgilbert at interlog dot com
+- sg_dd oflag=sparse,null
+  * sg3_utils-1.25
+
+* Mon May 07 2007 - dgilbert at interlog dot com
+- add sg_raw; sg_rtpg, sg_log, sg_inq and sg_format updates
+  * sg3_utils-1.24
+
+* Wed Jan 31 2007 - dgilbert at interlog dot com
+- add sg_read_buffer + sg_write_buffer
+  * sg3_utils-1.23
+
+* Mon Oct 16 2006 - dgilbert at interlog dot com
+- add sg_sat_identify, expand sg_format and sg_requests
+  * sg3_utils-1.22
+
+* Thu Jul 06 2006 - dgilbert at interlog dot com
+- add sg_vpd and sg_rdac, uniform exit statuses
+  * sg3_utils-1.21
+
+* Tue Apr 18 2006 - dgilbert at interlog dot com
+- sg_logs: sas port specific page decoding, sg*_dd updates
+  * sg3_utils-1.20
+
+* Fri Jan 27 2006 - dgilbert at interlog dot com
+- sg_get_config: resync features with mmc5 rev 1
+  * sg3_utils-1.19
+
+* Fri Nov 18 2005 - dgilbert at interlog dot com
+- add sg_map26, sg_inq: '-rr' option to play with hdparm
+  * sg3_utils-1.18
+
+* Thu Sep 22 2005 - dgilbert at interlog dot com
+- add ATA information VPD page
+  * sg3_utils-1.17
+
+* Wed Aug 10 2005 - dgilbert at interlog dot com
+- add sg_ident, sg_inq VPD page extensions
+  * sg3_utils-1.16
+
+* Sun Jun 05 2005 - dgilbert at interlog dot com
+- use O_NONBLOCK on all fds that use SG_IO iotcl
+  * sg3_utils-1.15
+
+* Fri May 06 2005 - dgilbert at interlog dot com
+- add sg_rmsn; sg_ses update to SES-2 rev 11
+  * sg3_utils-1.14
+
+* Sun Mar 13 2005 - dgilbert at interlog dot com
+- add sg_format, sg_dd extensions
+  * sg3_utils-1.13
+
+* Fri Jan 21 2005 - dgilbert at interlog dot com
+- add sg_wr_mode, sg_rtpg + sg_reassign; sginfo sas tweaks
+  * sg3_utils-1.12
+
+* Fri Nov 26 2004 - dgilbert at interlog dot com
+- add sg_sync, sg_prevent and sg_get_config; fix sg_requests
+  * sg3_utils-1.11
+
+* Tue Oct 26 2004 - dgilbert at interlog dot com
+- read_capacity (10+16) fix, add sg_luns
+  * sg3_utils-1.10
+
+* Thu Oct 21 2004 - dgilbert at interlog dot com
+- sg_requests, sg_ses, sg_verify, sg_err->sg_lib
+  * sg3_utils-1.09
+
+* Tue Aug 31 2004 - dgilbert at interlog dot com
+- 'register+move' in sg_persist, sg_opcodes sorts, sg_write_long
+  * sg3_utils-1.08
+
+* Thu Jul 08 2004 - dgilbert at interlog dot com
+- add '-fHead' to sginfo, '-i' for sg_inq, new sg_opcodes + sg_persist
+  * sg3_utils-1.07
+
+* Mon Apr 26 2004 - dgilbert at interlog dot com
+- sg3_utils.spec for mandrake; more sginfo work, sg_scan, sg_logs
+  * sg3_utils-1.06
+
+* Wed Nov 12 2003 - dgilbert at interlog dot com
+- sg_readcap: sizes; sg_logs: double fetch; sg_map 256 sg devices; sginfo
+  * sg3_utils-1.05
+
+* Tue May 13 2003 - dgilbert at interlog dot com
+- default sg_turs '-n=' to 1, sg_logs gets '-t' for temperature, CREDITS
+  * sg3_utils-1.04
+
+* Wed Apr 02 2003 - dgilbert at interlog dot com
+- 6 byte CDBs for sg_modes, sg_start on block devs, sg_senddiag, man pages
+  * sg3_utils-1.03
+
+* Wed Jan 01 2003 - dgilbert at interlog dot com
+- interwork with block SG_IO, fix in sginfo, '-t' for sg_turs
+  * sg3_utils-1.02
+
+* Wed Aug 14 2002 - dgilbert at interlog dot com
+- raw switch in sg_inq
+  * sg3_utils-1.01
+
+* Sun Jul 28 2002 - dgilbert at interlog dot com
+- decode sg_logs pages, add dio to sgm_dd, drop "gen=1" arg, "of=/dev/null"
+  * sg3_utils-1.00
+
+* Sun Mar 17 2002 - dgilbert at interlog dot com
+- add sg_modes+sg_logs for sense pages, expand sg_inq, add fua+sync to sg_dd++
+  * sg3_utils-0.99
+
+* Sat Feb 16 2002 - dgilbert at interlog dot com
+- resurrect sg_reset; snprintf cleanup, time,gen+cdbsz args to sg_dd++
+  * sg3_utils-0.98
+
+* Sun Dec 23 2001 - dgilbert at interlog dot com
+- move isosize to archive directory; now found in util-linux-2.10s and later
+  * sg3_utils-0.97
+
+* Fri Dec 21 2001 - dgilbert at interlog dot com
+- add sgm_dd, sg_read, sg_simple4 and sg_simple16 [add mmap-ed IO support]
+  * sg3_utils-0.96
+
+* Sun Sep 15 2001 - dgilbert at interlog dot com
+- sg_map can do inquiry; sg_dd, sgp_dd + sgq_dd dio help
+  * sg3_utils-0.95
+
+* Sun Apr 19 2001 - dgilbert at interlog dot com
+- add sg_start, improve sginfo and sg_map [Kurt Garloff]
+  * sg3_utils-0.94
+
+* Sun Mar 5 2001 - dgilbert at interlog dot com
+- add scsi_devfs_scan, add sg_include.h, 'coe' more general in sgp_dd
+  * sg3_utils-0.93
+
+* Tue Jan 16 2001 - dgilbert at interlog dot com
+- clean sg_err.h include dependencies, bug fixes, Makefile in archive directory
+  * sg3_utils-0.92
+
+* Mon Dec 21 2000 - dgilbert at interlog dot com
+- signals for sg_dd, man pages and additions for sg_rbuf and isosize
+  * sg3_utils-0.91
+
+* Mon Dec 11 2000 - dgilbert at interlog dot com
+- Initial version of package
+  * sg3_utils-0.90
diff --git a/archive/pre_configure/sg3_utils.spec_shared b/archive/pre_configure/sg3_utils.spec_shared
new file mode 100644
index 00000000..150b6b61
--- /dev/null
+++ b/archive/pre_configure/sg3_utils.spec_shared
@@ -0,0 +1,184 @@
+Summary: Utilities for devices that use SCSI command sets
+Name: sg3_utils
+Version: 1.25
+# Release: 1%{?dist}
+Release: 1
+License: GPL
+Group: Utilities/System
+Source: ftp://www.torque.net/sg/p/sg3_utils-%{version}.tgz
+Url: http://www.torque.net/sg/sg3_utils.html
+Provides: sg_utils
+BuildRequires: libtool
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager: Douglas Gilbert <dougg@torque.net>
+
+%description
+Collection of Linux utilities for devices that use the SCSI command set.
+Includes utilities to copy data based on "dd" syntax and semantics (called
+sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
+mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
+disks (sg_start); do self tests (sg_senddiag); and various other functions.
+See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
+series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
+must be used. In the 2.6 series other device names may be used as
+well (e.g. /dev/sda).
+
+Warning: Some of these tools access the internals of your system
+and the incorrect usage of them may render your system inoperable.
+
+%package libs
+Summary: Shared library for %{name}
+Group: System/Libraries
+
+%description libs
+This package contains the shared library for %{name}.
+
+%package devel
+Summary: Static library and header files for the sgutils library
+Group: Development/C
+Requires: %{name}-libs = %{version}-%{release}
+
+%description devel
+This package contains the static %{name} library and its header files for
+developing applications.
+
+%prep
+%setup -q
+
+%build
+make
+
+%install
+if [ "$RPM_BUILD_ROOT" != "/" ]; then
+        rm -rf $RPM_BUILD_ROOT
+fi
+%ifarch sparc64 ppc64 s390x x86_64
+make install PREFIX=$RPM_BUILD_ROOT/usr LIBDIR=$RPM_BUILD_ROOT/usr/lib64
+%else
+make install PREFIX=$RPM_BUILD_ROOT/usr
+%endif
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc CHANGELOG COVERAGE CREDITS INSTALL README README.sg_start
+%attr(755,root,root) %{_bindir}/*
+%{_mandir}/man8/*
+
+%files libs
+%defattr(-,root,root)
+%{_libdir}/*.so.*
+
+%files devel
+%defattr(-,root,root)
+%{_includedir}/scsi/*.h
+%{_libdir}/*.so
+%{_libdir}/*.a
+%{_libdir}/*.la
+
+%changelog
+* Wed Jul 11 2007 - dgilbert at interlog dot com
+- sg_dd oflag=sparse,null
+  * sg3_utils-1.25
+
+* Mon May 07 2007 - dgilbert at interlog dot com
+- add sg_raw; sg_rtpg, sg_log, sg_inq and sg_format updates
+  * sg3_utils-1.24
+
+* Wed Jan 31 2007 - dgilbert at interlog dot com
+- add sg_read_buffer + sg_write_buffer
+  * sg3_utils-1.23
+
+* Mon Oct 16 2006 - dgilbert at interlog dot com
+- add sg_sat_identify, expand sg_format and sg_requests
+  * sg3_utils-1.22
+
+* Thu Jul 06 2006 - dgilbert at interlog dot com
+- add sg_vpd and sg_rdac, uniform exit statuses
+  * sg3_utils-1.21
+
+* Tue Apr 18 2006 - dgilbert at interlog dot com
+- sg_logs: sas port specific page decoding, sg*_dd updates
+  * sg3_utils-1.20
+
+* Fri Jan 27 2006 - dgilbert at interlog dot com
+- sg_get_config: resync features with mmc5 rev 1
+  * sg3_utils-1.19
+
+* Fri Nov 18 2005 - dgilbert at interlog dot com
+- add sg_map26; sg_inq '-rr' option to play with hdparm
+  * sg3_utils-1.18
+
+* Thu Sep 22 2005 - dgilbert at interlog dot com
+- add ATA information VPD page to sg_inq
+  * sg3_utils-1.17
+
+* Wed Aug 10 2005 - dgilbert at interlog dot com
+- add sg_ident, sg_inq VPD page extensions
+  * sg3_utils-1.16
+
+* Sun Jun 05 2005 - dgilbert at interlog dot com
+- use O_NONBLOCK on all fds that use SG_IO ioctl
+  * sg3_utils-1.15
+
+* Fri May 06 2005 - dgilbert at interlog dot com
+- produce libsgutils (+ -devel variant) as well as sg3_utils binary rpm
+  * sg3_utils-1.14
+
+* Sun Mar 13 2005 - dgilbert at interlog dot com
+- add sg_format, sg_dd extensions
+  * sg3_utils-1.13
+
+* Fri Jan 21 2005 - dgilbert at interlog dot com
+- add sg_wr_mode, sg_rtpg + sg_reassign; sginfo sas tweaks
+  * sg3_utils-1.12
+
+* Fri Nov 26 2004 - dgilbert at interlog dot com
+- add sg_sync, sg_prevent and sg_get_config; fix sg_requests
+  * sg3_utils-1.11
+
+* Sat Oct 30 2004 - dgilbert at interlog dot com
+- fix read capacity (10+16), add sg_luns
+  * sg3_utils-1.10
+
+* Thu Oct 21 2004 - dgilbert at interlog dot com
+- sg_requests, sg_ses, sg_verify, libsgutils(sg_lib.c+sg_cmds.c), devel rpm
+  * sg3_utils-1.09
+
+* Tue Aug 31 2004 - dgilbert at interlog dot com
+- 'register+move' in sg_persist, sg_opcodes sorts, sg_write_long
+  * sg3_utils-1.08
+
+* Thu Jul 08 2004 - dgilbert at interlog dot com
+- add '-fHead' to sginfo, '-i' for sg_inq, new sg_opcodes + sg_persist
+  * sg3_utils-1.07
+
+* Mon Apr 26 2004 - dgilbert at interlog dot com
+- sg3_utils.spec for mandrake; more sginfo work, sg_scan, sg_logs
+  * sg3_utils-1.06
+
+* Wed Nov 12 2003 - dgilbert at interlog dot com
+- sg_readcap: sizes; sg_logs: double fetch; sg_map 256 sg devices; sginfo
+  * sg3_utils-1.05
+
+* Tue May 13 2003 - dgilbert at interlog dot com
+- default sg_turs '-n=' to 1, sg_logs gets '-t' for temperature, CREDITS
+  * sg3_utils-1.04
+
+* Wed Apr 02 2003 - dgilbert at interlog dot com
+- 6 byte CDBs for sg_modes, sg_start on block devs, sg_senddiag, man pages
+  * sg3_utils-1.03
+
+* Wed Jan 01 2003 - dgilbert at interlog dot com
+- interwork with block SG_IO, fix in sginfo, '-t' for sg_turs
+  * sg3_utils-1.02
+
+* Wed Aug 14 2002 - dgilbert at interlog dot com
+- raw switch in sg_inq
+  * sg3_utils-1.01
+
+* Sun Jul 28 2002 - dgilbert at interlog dot com
+- decode sg_logs pages, add dio to sgm_dd, drop "gen=1" arg, "of=/dev/null"
+  * sg3_utils-1.00