/* * Copyright (C) 2014 Andrew Duggan * Copyright (C) 2014 Synaptics Inc * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include #include "updateutil.h" const char *update_error_str[] = { "success", // UPDATE_SUCCESS "failed", // UPDATE_FAIL "timeout", // UPDATE_FAIL_TIMEOUT "invalid firmware image", // UPDATE_FAIL_VERIFY_IMAGE "checksum does not match image", // UPDATE_FAIL_VERIFY_CHECKSUM "image firmware size does not match device", // UPDATE_FAIL_VERIFY_FIRMWARE_SIZE "image config size does not match device", // UPDATE_FAIL_VERIFY_CONFIG_SIZE "image product ID does not match device", // UPDATE_FAIL_VERIFY_IMAGE_PRODUCTID_NOT_MATCH "image version is unsupported", // UPDATE_FAIL_UNSUPPORTED_IMAGE_VERSION "failed to find F01 on device", // UPDATE_FAIL_NO_FUNCTION_01 "failed to find F34 on device", // UPDATE_FAIL_NO_FUNCTION_34 "failed to query the basic properties in F01", // UPDATE_FAIL_QUERY_BASIC_PROPERTIES "failed to read F34 query registers", // UPDATE_FAIL_READ_F34_QUERIES "failed to read the bootloader id", // UPDATE_FAIL_READ_BOOTLOADER_ID "failed to read F34 control registers", // UPDATE_FAIL_READ_F34_CONTROLS "failed to write the bootloader id", // UPDATE_FAIL_WRITE_BOOTLOADER_ID "failed to enable flash programming", // UPDATE_FAIL_ENABLE_FLASH_PROGRAMMING "failed to reach idle state", // UPDATE_FAIL_NOT_IN_IDLE_STATE "programming is not enabled", // UPDATE_FAIL_PROGRAMMING_NOT_ENABLED "failed to scan the PDT", // UPDATE_FAIL_SCAN_PDT "failed to read the device status", // UPDATE_FAIL_READ_DEVICE_STATUS "device not in the bootloader after enabling programming", // UPDATE_FAIL_DEVICE_NOT_IN_BOOTLOADER "failed to read F01 control 0 register", // UPDATE_FAIL_READ_F01_CONTROL_0 "failed to write F01 control 0 register", // UPDATE_FAIL_WRITE_F01_CONTROL_0 "failed to write initial zeros", // UPDATE_FAIL_WRITE_INITIAL_ZEROS "failed to write block", // UPDATE_FAIL_WRITE_BLOCK "failed to write the flash command", // UPDATE_FAIL_WRITE_FLASH_COMMAND "timeout waiting for attn", // UPDATE_FAIL_TIMEOUT_WAITING_FOR_ATTN "failed to write erase all command", // UPDATE_FAIL_ERASE_ALL "the firmware image is older then the firmware on the device", // UPDATE_FAIL_FIRMWARE_IMAGE_IS_OLDER "invalid parameter", // UPDATE_FAIL_INVALID_PARAMETER "failed to open firmware image file", // UPDATE_FAIL_OPEN_FIRMWARE_IMAGE "write protection is activated", // UPDATE_FAIL_WRITE_PROTECTED }; const char * update_err_to_string(int err) { return update_error_str[err]; }